Microsoft MVP성태의 닷넷 이야기
오류 유형: 295. HTTP Error 503. The service is unavailable. [링크 복사], [링크+제목 복사],
조회: 27596
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

HTTP Error 503. The service is unavailable.

500번대 에러가 벌써 이렇게 쌓였군요. ^^

IIS 500 Internal Server Error - Skydrive에 공유된 경우
; https://www.sysnet.pe.kr/2/0/1612

[COM+] CreateObject 와 HTTP 500 - Internal server error
; https://www.sysnet.pe.kr/2/0/242

ASP.NET 웹 사이트를 IIS 7 이상의 환경에서 호스팅할 때 500 오류 발생
; https://www.sysnet.pe.kr/2/0/1563

웹 사이트의 모든 정적 컨텐츠 요청에 대해 "Internal Server Error" 응답
; https://www.sysnet.pe.kr/2/0/1538

IIS - 500.19 오류
; https://www.sysnet.pe.kr/2/0/976

오늘은 503 에러에 대해 사례 2개를 추가하려고 합니다. "http://localhost/"로 방문했더니 다음과 같은 오류 화면을 보았는데요.

Service Unavailable

HTTP Error 503. The service is unavailable.

이 때의 이벤트 로그를 보면 다음과 같은 항목이 있습니다.

Log Name:      System
Source:        Microsoft-Windows-WAS
Date:          2015-07-01 오전 12:55:09
Event ID:      5201
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      thetest
Description:
A process serving application pool 'DefaultAppPool' reported a failure during application preloading or service loading. The process id was '21644'.  Please ensure that all application preload or service settings in the application pool are configured properly.  The data field contains the error number.

메시지에 따라, 이 원인은 "serviceAutoStartEnabled, serviceAutoStartProvider" 옵션을 구성했으나,

IIS 7.5 부터 지원되는 웹 사이트 자동 시작 모드
; https://www.sysnet.pe.kr/2/0/1367

serviceAutoStartProvider 옵션에 지정된 닷넷 어셈블리를 로드하지 못한 경우에 발생한 것입니다. 따라서 해당 어셈블리를 설치하든가 그 옵션을 "%WINDIR%\system32\inetsrv\config\applicationHost.config" 파일로부터 <sites> 노드 내에 pre-load를 적용했던 웹 사이트를 찾아내 serviceAutoStartEnabled, serviceAutoStartProvider를 삭제해야 합니다.

...[생략]...
    <sites>
        ...[생략]...
        <site name="AutoSite" id="5">
                <application path="/" applicationPool="AutoSite" 
                    serviceAutoStartEnabled="true" 
                    serviceAutoStartProvider="PreWarmupApp"
                    >
                    <virtualDirectory path="/" physicalPath="D:\WebApplication1\WebApplication1" />
                </application>
                <bindings>
                    <binding protocol="http" bindingInformation="*:80:" />
                </bindings>
        </site>
        ...[생략]...
    </sites>
...[생략]...




또 하나의 경우가 있는데요. 이번에는 이벤트 로그에 다음과 같은 항목이 남아 있었습니다.

Log Name:      System
Source:        Microsoft-Windows-WAS
Date:          2015-07-01 오전 12:58:38
Event ID:      5022
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      testtest
Description:
The Windows Process Activation Service failed to create a worker process for the application pool 'test'. The data field contains the error number.

메시지로부터 원인을 유추할 수는 없었는데요. 조사 결과, 해당 "test" AppPool의 계정이 "ApplicationPoolIdentity"로 설정되어 있는데, 정작 "test" AppPool에서 돌아갈 웹 애플리케이션의 '루트 디렉터리' 경로에는 권한이 없는 경우에 이런 현상이 발생했습니다.

테스트를 위해 간단하게 해당 AppPool의 계정을 "LocalSystem"으로 설정해 보면 바로 확인할 수 있습니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/25/2021]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 



2015-07-03 06시00분
권한이 없는 경우, 때로는 다음의 오류도 발생하는 경우가 있음.

System.InvalidOperationException: Failed to map the path '...'.

정성태

1  2  [3]  4  5  6  7  8  9  10  11  12  13  14  15  ...
NoWriterDateCnt.TitleFile(s)
13868정성태1/17/20253109Windows: 277. Hyper-V - Windows 11 VM의 Enhanced Session 모드로 로그인을 할 수 없는 문제
13867정성태1/17/20254062오류 유형: 943. Hyper-V에 Windows 11 설치 시 "This PC doesn't currently meet Windows 11 system requirements" 오류
13866정성태1/16/20254263개발 환경 구성: 739. Windows 10부터 바뀐 device driver 서명 방법
13865정성태1/15/20253943오류 유형: 942. C# - .NET Framework 4.5.2 이하의 버전에서 HttpWebRequest로 https 호출 시 "System.Net.WebException" 예외 발생
13864정성태1/15/20253906Linux: 114. eBPF를 위해 필요한 SELinux 보안 정책
13863정성태1/14/20253356Linux: 113. Linux - 프로세스를 위한 전용 SELinux 보안 문맥 지정
13862정성태1/13/20253628Linux: 112. Linux - 데몬을 위한 SELinux 보안 정책 설정
13861정성태1/11/20253907Windows: 276. 명령행에서 원격 서비스를 동기/비동기로 시작/중지
13860정성태1/10/20253614디버깅 기술: 216. WinDbg - 2가지 유형의 식 평가 방법(MASM, C++)
13859정성태1/9/20253971디버깅 기술: 215. Windbg - syscall 이후 실행되는 KiSystemCall64 함수 및 SSDT 디버깅
13858정성태1/8/20254100개발 환경 구성: 738. PowerShell - 원격 호출 시 "powershell.exe"가 아닌 "pwsh.exe" 환경으로 명령어를 실행하는 방법
13857정성태1/7/20254147C/C++: 187. Golang - 콘솔 응용 프로그램을 Linux 데몬 서비스를 지원하도록 변경파일 다운로드1
13856정성태1/6/20253726디버깅 기술: 214. Windbg - syscall 단계까지의 Win32 API 호출 (예: Sleep)
13855정성태12/28/20244459오류 유형: 941. Golang - os.StartProcess() 사용 시 오류 정리
13854정성태12/27/20244558C/C++: 186. Golang - 콘솔 응용 프로그램을 NT 서비스를 지원하도록 변경파일 다운로드1
13853정성태12/26/20244023디버깅 기술: 213. Windbg - swapgs 명령어와 (Ring 0 커널 모드의) FS, GS Segment 레지스터
13852정성태12/25/20244485디버깅 기술: 212. Windbg - (Ring 3 사용자 모드의) FS, GS Segment 레지스터파일 다운로드1
13851정성태12/23/20244238디버깅 기술: 211. Windbg - 커널 모드 디버깅 상태에서 사용자 프로그램을 디버깅하는 방법
13850정성태12/23/20244741오류 유형: 940. "Application Information" 서비스를 중지한 경우, "This file does not have an app associated with it for performing this action."
13849정성태12/20/20244879디버깅 기술: 210. Windbg - 논리(가상) 주소를 Segmentation을 거쳐 선형 주소로 변경
13848정성태12/18/20244818디버깅 기술: 209. Windbg로 알아보는 Prototype PTE파일 다운로드2
13847정성태12/18/20244855오류 유형: 939. golang - 빌드 시 "unknown directive: toolchain" 오류 빌드 시 이런 오류가 발생한다면?
13846정성태12/17/20245053디버깅 기술: 208. Windbg로 알아보는 Trans/Soft PTE와 2가지 Page Fault 유형파일 다운로드1
13845정성태12/16/20244526디버깅 기술: 207. Windbg로 알아보는 PTE (_MMPTE)
13844정성태12/14/20245212디버깅 기술: 206. Windbg로 알아보는 PFN (_MMPFN)파일 다운로드1
13843정성태12/13/20244391오류 유형: 938. Docker container 내에서 빌드 시 error MSB3021: Unable to copy file "..." to "...". Access to the path '...' is denied.
1  2  [3]  4  5  6  7  8  9  10  11  12  13  14  15  ...