Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Visual Studio 빌드 실패 - The OutputPath property is not set for project

다음과 같은 메시지와 함께 빌드 실패가 난다면?

d:\temp\MyApp\bin>msbuild "..\TestWebApp\TestWebApp.csproj" /property:Platform=x86 /t:Rebuild /property:OutDir=d:\temp\MyApp\bin
Microsoft (R) Build Engine version 4.6.1586.0
[Microsoft .NET Framework, version 4.0.30319.42000]
Copyright (C) Microsoft Corporation. All rights reserved.

Build started 2017-03-14 오후 2:25:56.
The target "MvcBuildViews" listed in a BeforeTargets attribute at "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\Web\Microsoft.Web.Publishing.targets (845,131)" does not exist in the project, and will be ignored.
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" on node 1 (Rebuild target(s)).
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (1) is building "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (5) on node 1 (Clean target(s)).
Project file contains ToolsVersion="15.0". This toolset may be unknown or missing, in which case you may be able to resolve this by installing the appropriate version of MSBuild, or the build may have been forced to a particular ToolsVersion for policy reasons. Treating the project as if it had ToolsVersion="4.0". For more information, please see http://go.microsoft.com/fwlink/?LinkId=291333.
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]
Done Building Project "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target(s)) -- FAILED.

Done Building Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target(s)) -- FAILED.


Build FAILED.

"d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target) (1) ->
"d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target) (5) ->
(_CheckForInvalidConfigurationAndPlatform target) ->
  C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]

    0 Warning(s)
    1 Error(s)

Time Elapsed 00:00:00.48

오류 메시지를 잘 보시면 그 원인을 알 수 있습니다.

The OutputPath property is not set for project 'RefObjectLib.csproj'. Please check to make sure that you have specified a valid combination of Configuration and Platform for this project. Configuration='Debug' Platform='x86'. You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project.


그러니까, 위의 상황은 TestWebApp.csproj 프로젝트에서 RefObjectLib.csproj 프로젝트를 참조하고 있는 것입니다. 그렇기 때문에 TestWebApp.csproj를 msbuild로 Rebuild 명령을 내리니 의존 관계에서 따라 RefObjectLib.csproj 프로젝트부터 빌드를 시작한 것입니다.

문제는, RefObjectLib.csproj에 "OutputPath" 속성을 다음 Configuration='Debug' Platform='x86' 빌드 구성이 누락되어 있기 때문에 오류가 발생하였습니다.

실제로 RefObjectLib.csproj 프로젝트를 보면, PropertyGroup으로 "Debug|AnyCPU"와 "Release|AnyCPU"만 있을 뿐 "x86" 구성이 없는 것을 확인할 수 있습니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>

문제 해결은 간단합니다. RefObjectLib.csproj 파일의 "AnyCPU" 구성 외에 "x86" 구성을 만들어 주면 되는데, 이런 경우 Visual Studio의 "Configuration Manager"에서 할 수도 있지만 다음과 같은 오류 메시지로 추가를 못하는 수가 종종 있습니다.

This platform could not be created because a solution platform of the same name already exists.

당황하지 마시고, 그냥 메모장에서 .csproj 파일을 열고 'Debug|AnyCPU'와 'Release|AnyCPU' 구성을 그대로 복사해서 'x86'으로 만들어 주면 됩니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>

위의 내용만 추가하고 다시 빌드하면 정상적으로 바이너리가 생성되는 것을 확인할 수 있습니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 3/24/2017]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 106  107  108  [109]  110  111  112  113  114  115  116  117  118  119  120  ...
NoWriterDateCnt.TitleFile(s)
11238정성태7/6/201721957오류 유형: 405. NT 서비스 시작 시 "Error 1067: The process terminated unexpectedly." 오류 발생 [2]
11237정성태7/5/201723689.NET Framework: 663. C# - PDB 파일 경로를 PE 파일로부터 얻는 방법파일 다운로드1
11236정성태7/4/201727463.NET Framework: 662. C# - VHD/VHDX 가상 디스크를 마운트하지 않고 파일을 복사하는 방법파일 다운로드1
11235정성태6/29/201721754Math: 20. Matlab/Octave로 Gram-Schmidt 정규 직교 집합 구하는 방법
11234정성태6/29/201719390오류 유형: 404. SharePoint 2013 설치 과정에서 "The username is invalid The account must be a valid domain account" 오류 발생
11233정성태6/28/201719298오류 유형: 403. SharePoint Server 2013을 Windows Server 2016에 설치할 때 .NET 4.5 설치 오류 발생
11232정성태6/28/201720168Windows: 144. Windows Server 2016에 Windows Identity Extensions을 설치하는 방법
11231정성태6/28/201719816디버깅 기술: 86. windbg의 mscordacwks DLL 로드 문제 - 세 번째 이야기 [1]
11230정성태6/28/201719222제니퍼 .NET: 26. 제니퍼 닷넷 적용 사례 (6) - 잦은 Recycle 문제
11229정성태6/27/201720784오류 유형: 402. Windows Server Backup 관리 콘솔이 없어진 경우
11228정성태6/26/201717848개발 환경 구성: 320. Visual Basic .NET 프로젝트에서 내장 Manifest 자원을 EXE 파일로부터 제거하는 방법파일 다운로드1
11227정성태6/19/201726633개발 환경 구성: 319. windbg에서 python 스크립트 실행하는 방법 - pykd [6]
11226정성태6/19/201717434오류 유형: 401. Microsoft Edge를 실행했는데 입력 반응이 없는 경우
11225정성태6/19/201716616오류 유형: 400. Outlook - The required file ExSec32.dll cannot be found in your path. Install Microsoft Outlook again.
11224정성태6/13/201719169.NET Framework: 661. Json.NET의 DeserializeObject 수행 시 속성 이름을 동적으로 바꾸는 방법파일 다운로드1
11223정성태6/12/201718207개발 환경 구성: 318. WCF Service Application과 WCFTestClient.exe
11222정성태6/10/201722481오류 유형: 399. WCF - A property with the name 'UriTemplateMatchResults' already exists.파일 다운로드1
11221정성태6/10/201719374오류 유형: 398. Fakes - Assembly 'Jennifer5.Fakes' with identity '[...].Fakes, [...]' uses '[...]' which has a higher version than referenced assembly '[...]' with identity '[...]'
11220정성태6/10/201724187.NET Framework: 660. Shallow Copy와 Deep Copy [1]파일 다운로드2
11219정성태6/7/201719177.NET Framework: 659. 닷넷 - TypeForwardedFrom / TypeForwardedTo 특성의 사용법
11218정성태6/1/201722132개발 환경 구성: 317. Hyper-V 내의 VM에서 다시 Hyper-V를 설치: Nested Virtualization
11217정성태6/1/201718274오류 유형: 397. initerrlog: Could not open error log file 'C:\...\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'
11216정성태6/1/201719972오류 유형: 396. Activation context generation failed
11215정성태6/1/201721987오류 유형: 395. 관리 콘솔을 실행하면 "This app has been blocked for your protection" 오류 발생 [1]
11214정성태6/1/201719124오류 유형: 394. MSDTC 서비스 시작 시 -1073737712(0xC0001010) 오류와 함께 종료되는 문제 [1]
11213정성태5/26/201724706오류 유형: 393. TFS - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
... 106  107  108  [109]  110  111  112  113  114  115  116  117  118  119  120  ...