Microsoft MVP성태의 닷넷 이야기
개발 환경 구성: 331. SQL Server Express를 위한 방화벽 설정 [링크 복사], [링크+제목 복사],
조회: 21933
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 

SQL Server Express를 위한 방화벽 설정

이에 대해서는 다음의 문서에 자세하게 나와 있습니다.

Configure the Windows Firewall to Allow SQL Server Access
; https://docs.microsoft.com/en-us/sql/sql-server/install/configure-the-windows-firewall-to-allow-sql-server-access#BKMK_dynamic_ports

SQL Express의 경우 "named instance"에 해당한다는 것을 염두에 두고 저 문서를 보시면 됩니다.

가볍게 정리하면, SQL Server는 기본적으로 TCP 1433 포트로 서비스가 됩니다. 만약, SQL Server Express가 설치된 컴퓨터에 다른 MSSQLSERVER 인스턴스가 없다면 Express가 1433 포트를 점유합니다. 하지만, MSSQLSERVER 기본 인스턴스가 있다면 동적으로 포트를 할당받게 됩니다.

또한, SQL Server Browser 서비스가 UDP 1434 포트로 서비스를 하기 때문에 이 포트도 열려 있어야 합니다. 다음은 이에 대한 언급입니다.

SQL Server named instances in the default configuration The TCP port is a dynamic port determined at the time the Database Engine starts.
See the discussion below in the section Dynamic Ports. UDP port 1434 might be required for the SQL Server Browser Service when you are using named instances.


위의 글에서 문제가 되는 것은, 동적 포트가 sqlservr.exe가 시작하는 시점에 결정된다는 점입니다. 이 때문에 SQL Express가 현재 서비스하고 있는 동적 포트를 방화벽에서 열어도 소용이 없습니다. 이에 대한 해결책으로 다음의 문서에 따라 고정 포트를 할당하거나,

Configure a Server to Listen on a Specific TCP Port
; https://docs.microsoft.com/en-us/sql/database-engine/configure-windows/configure-a-server-to-listen-on-a-specific-tcp-port

아니면, 방화벽 규칙을 포트가 아닌 sqlservr.exe 프로그램에 대해 설정하는 것입니다. 후자의 경우, 윈도우 방화벽 설정엔 sqlservr.exe에 대한 모든 포트를 허용합니다. 달리 말하면, 윈도우 방화벽이 아닌 외부의 별도 방화벽 장비라면 이 방법을 사용할 수는 없습니다. 이런 사항에 대해 다음의 문구가 있으니 참고하세요.

By default, named instances (including SQL Server Express) use dynamic ports. That means that every time that the Database Engine starts, it identifies an available port and uses that port number. If the named instance is the only instance of the Database Engine installed, it will probably use TCP port 1433. If other instances of the Database Engine are installed, it will probably use a different TCP port. Because the port selected might change every time that the Database Engine is started, it is difficult to configure the firewall to enable access to the correct port number. Therefore, if a firewall is used, we recommend reconfiguring the Database Engine to use the same port number every time. This is called a fixed port or a static port. For more information, see Configure a Server to Listen on a Specific TCP Port (SQL Server Configuration Manager).

An alternative to configuring a named instance to listen on a fixed port is to create an exception in the firewall for a SQL Server program such as sqlservr.exe (for the Database Engine). This can be convenient, but the port number will not appear in the Local Port column of the Inbound Rules page when you are using the Windows Firewall with Advanced Security MMC snap-in. This can make it more difficult to audit which ports are open. Another consideration is that a service pack or cumulative update can change the path to the SQL Server executable which will invalidate the firewall rule.


참고로, SQL Express가 점유한 동적 포트 번호는 "Configure a Server to Listen on a Specific TCP Port" 문서의 "TCP/IP Properties" 창에서 스크롤을 마지막으로 내리면 "IPAll"이라는 범주가 나오는데 거기에 "TCP Dynamic Ports"로 확인이 가능합니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]







[최초 등록일: ]
[최종 수정일: 9/11/2017]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




1  2  3  4  5  [6]  7  8  9  10  11  12  13  14  15  ...
NoWriterDateCnt.TitleFile(s)
13889정성태2/20/20257685닷넷: 2322. C# - 프로세스 메모리 중 Private Working Set 크기를 구하는 방법(성능 카운터, WMI) [1]파일 다운로드1
13888정성태2/17/20256404닷넷: 2321. Blazor에서 발생할 수 있는 async void 메서드의 부작용
13887정성태2/17/20258153닷넷: 2320. Blazor의 razor 페이지에서 code-behind 파일로 코드를 분리 및 DI 사용법
13886정성태2/15/20255644VS.NET IDE: 196. Visual Studio - Code-behind처럼 cs 파일을 그룹핑하는 방법
13885정성태2/14/20257792닷넷: 2319. ASP.NET Core Web API / Razor 페이지에서 발생할 수 있는 async void 메서드의 부작용
13884정성태2/13/20258373닷넷: 2318. C# - (async Task가 아닌) async void 사용 시의 부작용파일 다운로드1
13883정성태2/12/20258214닷넷: 2317. C# - Memory Mapped I/O를 이용한 PCI Configuration Space 정보 열람파일 다운로드1
13882정성태2/10/20256436스크립트: 70. 파이썬 - oracledb 패키지 연동 시 Thin / Thick 모드
13881정성태2/7/20256439닷넷: 2316. C# - Port I/O를 이용한 PCI Configuration Space 정보 열람파일 다운로드1
13880정성태2/5/20258814오류 유형: 947. sshd - Failed to start OpenSSH server daemon.
13879정성태2/5/20258410오류 유형: 946. Ubuntu - N: Updating from such a repository can't be done securely, and is therefore disabled by default.
13878정성태2/3/20258049오류 유형: 945. Windows - 최대 절전 모드 시 DRIVER_POWER_STATE_FAILURE 발생 (pacer.sys)
13877정성태1/25/20256632닷넷: 2315. C# - PCI 장치 열거 (레지스트리, SetupAPI)파일 다운로드1
13876정성태1/25/20258329닷넷: 2314. C# - ProcessStartInfo 타입의 Arguments와 ArgumentList파일 다운로드1
13875정성태1/24/20256047스크립트: 69. 파이썬 - multiprocessing 패키지의 spawn 모드로 동작하는 uvicorn의 workers
13874정성태1/24/20257989스크립트: 68. 파이썬 - multiprocessing Pool의 기본 프로세스 시작 모드(spawn, fork)
13873정성태1/23/20255813디버깅 기술: 217. WinDbg - PCI 장치 열거파일 다운로드1
13872정성태1/23/20255442오류 유형: 944. WinDbg - 원격 커널 디버깅이 연결은 되지만 Break (Ctrl + Break) 키를 눌러도 멈추지 않는 현상
13871정성태1/22/20256679Windows: 278. Windows - 윈도우를 다른 모니터 화면으로 이동시키는 단축키 (Window + Shift + 화살표)
13870정성태1/18/20258038개발 환경 구성: 741. WinDbg - 네트워크 커널 디버깅이 가능한 NIC 카드 지원 확대
13869정성태1/18/20256474개발 환경 구성: 740. WinDbg - _NT_SYMBOL_PATH 환경 변수에 설정한 경로로 심벌 파일을 다운로드하지 않는 경우
13868정성태1/17/20256246Windows: 277. Hyper-V - Windows 11 VM의 Enhanced Session 모드로 로그인을 할 수 없는 문제
13867정성태1/17/20258428오류 유형: 943. Hyper-V에 Windows 11 설치 시 "This PC doesn't currently meet Windows 11 system requirements" 오류
13866정성태1/16/20259426개발 환경 구성: 739. Windows 10부터 바뀐 device driver 서명 방법
13865정성태1/15/20257948오류 유형: 942. C# - .NET Framework 4.5.2 이하의 버전에서 HttpWebRequest로 https 호출 시 "System.Net.WebException" 예외 발생
13864정성태1/15/20257899Linux: 114. eBPF를 위해 필요한 SELinux 보안 정책
1  2  3  4  5  [6]  7  8  9  10  11  12  13  14  15  ...