Microsoft MVP성태의 닷넷 이야기
오류 유형: 429. 이벤트 로그 - User Policy could not be updated successfully [링크 복사], [링크+제목 복사],
조회: 14303
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 

이벤트 로그 - User Policy could not be updated successfully

gpupdate /force 명령어 수행 시 다음과 같은 오류가 발생합니다.

C:\WINDOWS\system32>gpupdate /force
Updating policy...

Computer Policy update has completed successfully.
User Policy could not be updated successfully. The following errors were encountered:

The processing of Group Policy failed. Windows could not determine if the user and computer accounts are in the same forest. Ensure the user domain name matches the name of a trusted domain that resides in the same forest as the computer account.

To diagnose the failure, review the event log or run GPRESULT /H GPReport.html from the command line to access information about Group Policy results.

이와 함께 이벤트 로그에 관련 항목이 기록됩니다.

Log Name:      System
Source:        Microsoft-Windows-GroupPolicy
Date:          2017-11-23 오후 12:04:28
Event ID:      1110
Task Category: None
Level:         Error
Keywords:      
User:          TESTAD\TestUser
Computer:      TESTMAIN.TESTAD.com
Description:
The processing of Group Policy failed. Windows could not determine if the user and computer accounts are in the same forest. Ensure the user domain name matches the name of a trusted domain that resides in the same forest as the computer account.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
    <EventID>1110</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>1</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2017-11-23T03:04:28.048164700Z" />
    <EventRecordID>70550</EventRecordID>
    <Correlation ActivityID="{17E672BE-0F2B-4DFD-99F6-D53F42876BFD}" />
    <Execution ProcessID="1028" ThreadID="1352" />
    <Channel>System</Channel>
    <Computer>TESTMAIN.TESTAD.com</Computer>
    <Security UserID="S-1-5-21-1990051354-560935109-2448667075-1104" />
  </System>
  <EventData>
    <Data Name="SupportInfo1">1</Data>
    <Data Name="SupportInfo2">2639</Data>
    <Data Name="ProcessingMode">0</Data>
    <Data Name="ProcessingTimeInMilliseconds">15</Data>
    <Data Name="ErrorCode">1722</Data>
    <Data Name="ErrorDescription">The RPC server is unavailable. </Data>
  </EventData>
</Event>

gpresult를 실행해,

C:\WINDOWS\system32> GPRESULT /H GPReport.html

생성된 gpreport.html를 보면 다음과 같은 내용이 있습니다.

During last computer policy refresh on 2017-11-23 오후 12:33:32
Error: Computer determined to be not in a site. Error code 0x77F.

During last user policy refresh on 2017-11-23 오후 12:33:32
The processing of Group Policy failed. Windows could not determine if the user and computer accounts are in the same forest. Ensure the user domain name matches the name of a trusted domain that resides in the same forest as the computer account.

딱히 해결 방법을 못 찾다가 결국 다음의 글에 따라,

Event ID 1110 - Group Policy Preprocessing (Active Directory)
; https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc727342(v=ws.10)

Disjoin and join the computer to the domain. Then log on with the same user account that experienced the problem.

해당 컴퓨터를 AD로부터 분리한 후 다시 연결하는 것으로 해결했습니다. (그러고 보면 잘 해결되지 않는 AD 문제는 다시 연결하면 해결되는 경우가 종종 있습니다.)




참고로, 다음과 같이 실행할 때마다 경고가 뜰 수 있습니다.

C:\WINDOWS\system32> gpupdate /force
Updating policy...

Computer Policy update has completed successfully.
User Policy update has completed successfully.

The following warnings were encountered during user policy processing:

The Group Policy Client Side Extension Folder Redirection was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance.

For more detailed information, review the event log or run GPRESULT /H GPReport.html from the command line to access information about Group Policy results.

Certain user policies are enabled that can only run during logon.

OK to log off? (Y/N)

로그오프/온 이후에도 gpupdate /force를 수행하면 다시 동일하게 경고가 뜨며, gpreport.html에도 다음과 같은 정도의 메시지만 들어 있습니다.

Folder Redirection did not complete policy processing because the user needs to log on again for the settings to be applied. Group Policy will attempt to apply the settings at the user's next logon.

Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 2017-11-23 오후 1:51:33 and 2017-11-23 오후 1:51:34.

그런데 이 경고는 그냥 무시하면 됩니다.

The Group Policy Client Side Extension Folder Redirection Issue 
; https://social.technet.microsoft.com/Forums/windowsserver/en-US/2ff78117-8d11-42b4-b5cd-07c1e3fab6d2/the-group-policy-client-side-extension-folder-redirection-issue?forum=winserverGP

위의 글에도 나오지만 원래 "Folder Redirection" 설정은 로그온 시에만 동기적으로 적용되는 정책이기 때문에 비동기 식으로 업데이트하는 gpupdate /force로 강제 설정을 하면 경고로 뜨는 것에 불과합니다. 즉, 어쨌든 로그온 시에 적용이 될 것이고 다시 gpupdate /force를 실행하면 그사이 또 바뀐 것에 대해 다음번 로그온 시에 적용하겠다는 경고일 뿐입니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]







[최초 등록일: ]
[최종 수정일: 7/17/2021]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 16  17  18  19  20  21  22  23  24  25  26  27  [28]  29  30  ...
NoWriterDateCnt.TitleFile(s)
12933정성태1/21/20227902.NET Framework: 1136. C# - ffmpeg(FFmpeg.AutoGen)를 이용해 MP2 오디오 파일 디코딩 예제(decode_audio.c)파일 다운로드1
12932정성태1/20/20228351.NET Framework: 1135. C# - ffmpeg(FFmpeg.AutoGen)로 하드웨어 가속기를 이용한 비디오 디코딩 예제(hw_decode.c) [2]파일 다운로드1
12931정성태1/20/20226465개발 환경 구성: 632. ASP.NET Core 프로젝트를 AKS/k8s에 올리는 과정
12930정성태1/19/20227095개발 환경 구성: 631. AKS/k8s의 Volume에 파일 복사하는 방법
12929정성태1/19/20226884개발 환경 구성: 630. AKS/k8s의 Pod에 Volume 연결하는 방법
12928정성태1/18/20227017개발 환경 구성: 629. AKS/Kubernetes에서 호스팅 중인 pod에 shell(/bin/bash)로 진입하는 방법
12927정성태1/18/20226777개발 환경 구성: 628. AKS 환경에 응용 프로그램 배포 방법
12926정성태1/17/20227272오류 유형: 787. AKS - pod 배포 시 ErrImagePull/ImagePullBackOff 오류
12925정성태1/17/20227404개발 환경 구성: 627. AKS의 준비 단계 - ACR(Azure Container Registry)에 docker 이미지 배포
12924정성태1/15/20228893.NET Framework: 1134. C# - ffmpeg(FFmpeg.AutoGen)를 이용한 비디오 디코딩 예제(decode_video.c) [2]파일 다운로드1
12923정성태1/15/20227771개발 환경 구성: 626. ffmpeg.exe를 사용해 비디오 파일을 MPEG1 포맷으로 변경하는 방법
12922정성태1/14/20226833개발 환경 구성: 625. AKS - Azure Kubernetes Service 생성 및 SLO/SLA 변경 방법
12921정성태1/14/20225793개발 환경 구성: 624. Docker Desktop에서 별도 서버에 설치한 docker registry에 이미지 올리는 방법
12920정성태1/14/20226546오류 유형: 786. Camtasia - An error occurred with the camera: Failed to Add Video Sampler.
12919정성태1/13/20226375Windows: 199. Host Network Service (HNS)에 의해서 점유되는 포트
12918정성태1/13/20226603Linux: 47. WSL - shell script에서 설정한 환경 변수가 스크립트 실행 후 반영되지 않는 문제
12917정성태1/12/20225818오류 유형: 785. C# - The type or namespace name '...' could not be found (are you missing a using directive or an assembly reference?)
12916정성태1/12/20225579오류 유형: 784. TFS - One or more source control bindings for this solution are not valid and are listed below.
12915정성태1/11/20225860오류 유형: 783. Visual Studio - We didn't find any interpreters
12914정성태1/11/20227842VS.NET IDE: 172. 비주얼 스튜디오 2022의 파이선 개발 환경 지원
12913정성태1/11/20228341.NET Framework: 1133. C# - byte * (바이트 포인터)를 FileStream으로 쓰는 방법 [1]
12912정성태1/11/20228976개발 환경 구성: 623. ffmpeg.exe를 사용해 비디오 파일의 이미지를 PGM(Portable Gray Map) 파일 포맷으로 출력하는 방법 [1]
12911정성태1/11/20226277VS.NET IDE: 171. 비주얼 스튜디오 - 더 이상 만들 수 없는 "ASP.NET Core 3.1 Web Application (.NET Framework)" 프로젝트
12910정성태1/10/20226748제니퍼 .NET: 30. 제니퍼 닷넷 적용 사례 (8) - CPU high와 DB 쿼리 성능에 문제가 함께 있는 사이트
12909정성태1/10/20228148오류 유형: 782. Visual Studio 2022 설치 시 "Couldn't install Microsoft.VisualCpp.Redist.14.Latest"
12908정성태1/10/20225986.NET Framework: 1132. C# - ref/out 매개변수의 IL 코드 처리
... 16  17  18  19  20  21  22  23  24  25  26  27  [28]  29  30  ...