Microsoft MVP성태의 닷넷 이야기
Linux: 3. Synology NAS(DS216+II)에서 FTDI 장치를 C/C++로 제어 [링크 복사], [링크+제목 복사],
조회: 25369
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 

(시리즈 글이 8개 있습니다.)
개발 환경 구성: 399. Synology NAS(DS216+II)에 gcc 컴파일러 설치
; https://www.sysnet.pe.kr/2/0/11705

개발 환경 구성: 403. Synology NAS(DS216+II)에 docker 설치 후 .NET Core 2.1 응용 프로그램 실행하는 방법
; https://www.sysnet.pe.kr/2/0/11713

개발 환경 구성: 404. (opkg가 설치된) Synology NAS(DS216+II)에 cmake 설치
; https://www.sysnet.pe.kr/2/0/11718

Linux: 3. Synology NAS(DS216+II)에서 FTDI 장치를 C/C++로 제어
; https://www.sysnet.pe.kr/2/0/11733

Linux: 4. Synology NAS(DS216+II)에 FTDI 장치 연결 후 C#(.NET Core)으로 DTR 제어
; https://www.sysnet.pe.kr/2/0/11734

사물인터넷: 51. Synology NAS(DS216+II)를 이용한 원격 컴퓨터의 전원 스위치 제어
; https://www.sysnet.pe.kr/2/0/11740

개발 환경 구성: 446. Synology NAS를 Windows 10에서 iSCSI로 연결하는 방법
; https://www.sysnet.pe.kr/2/0/11967

개발 환경 구성: 720. Synology NAS - docker 원격 제어를 위한 TCP 바인딩 추가
; https://www.sysnet.pe.kr/2/0/13712




Synology NAS(DS216+II)에서 FTDI 장치를 C/C++로 제어

지난 글에서 살펴본 FTDI 장치도,

PC에 연결해 동작하는 자신만의 USB 장치 만들어 보기
; https://www.sysnet.pe.kr/2/0/11606

Raspberry PI Zero (W)에 FTDI 장치 연결 후 C/C++로 DTR 제어
; https://www.sysnet.pe.kr/2/0/11716

DS216+II 제품에 그냥 USB 케이블로 연결하면 다음과 같이 "FT232 Serial (UART) IC - Future Technology Devices International, Ltd" 장치로 인식이 됩니다.

ftdi_ds216_1.png

연결 및 해제 시 dmesg 로그를 보면 마지막에 다음의 라인이 추가되는데,

[연결했을 때]
usb 1-2: new full-speed USB device number 4 using xhci_hcd

[해제했을 때]
usb 1-2: USB disconnect, device number 4

메시지로 봐서는 USB 장치로써만 인식했을 뿐 Serial 장치로 인식은 안 한 것입니다. 일례로 라즈베리 파이 제로에 연결했을 때는, "FTDI USB Serial Device converter now attached to ttyUSB0"와 같은 메시지로 "ttyUSB0" 장치에 연결되었으므로 명백히 직렬 통신을 할 수 있었지만 "usb 1-2: new full-speed USB device number 4 using xhci_hcd" 이 정도의 메시지로는 그냥 범용 USB 장치가 연결된 것에 불과하므로 직렬 통신 코드를 사용할 수 없습니다.




그런데, 저 장치 정도의 인식만으로 제어를 할 수 있는 라이브러리가 있습니다.

D2XX Direct Drivers
; https://www.ftdichip.com/Drivers/D2XX.htm

FTDI Drivers Installation Guide for Linux - FTDI Chip
; https://www.ftdichip.com/Support/Documents/AppNotes/AN_220_FTDI_Drivers_Installation_Guide_for_Linux.pdf

문서에 따라, 우선 다음의 파일을 내려받아 압축을 해제하고,

~# sudo -i
~# https://www.ftdichip.com/Drivers/D2XX/Linux/libftd2xx-x86_64-1.4.8.gz  // DS216+II 모델의 경우 Intel CPU이므로
~# gunzip libftd2xx1.1.12.tar.gz
~# tar -xvf libftd2xx1.1.12.tar

링크를 걸어준 후 실행 옵션을 변경합니다.

~# cp ./releases/build/lib* /usr/local/lib
~# cd /usr/local/lib
~# ln -s libftd2xx.so.1.1.12 libftd2xx.so
~# chmod 0755 libftd2xx.so.1.1.12

그다음 빌드를 해야 하는데 다음의 글에 따라 gcc 환경을 갖춰야 합니다.

Synology NAS(DS216+II)에 gcc 컴파일러 설치
; https://www.sysnet.pe.kr/2/0/11705

Synology NAS(DS216+II)에서 실행한 gcc의 Segmentation fault
; https://www.sysnet.pe.kr/2/0/11706

이와 함께 make 도구도 설치한 다음,

~# opkg install make

Installing make (4.2.1-2) to root...
Downloading http://pkg.entware.net/binaries/x86-64/make_4.2.1-2_x86-64.ipk
Configuring make.

빌드할 디렉터리로 이동해,

cd ./release/examples

Makefile의 내용에 CC를 gcc로 명명해 줍니다.

export CC = gcc

SUBDIRS = \
        BitMode \
        EEPROM/erase \
        EEPROM/read \
        EEPROM/write \
        EEPROM/user/read \
        EEPROM/user/size \
        EEPROM/user/write \
        Events \
        LargeRead \
        loopback \
        MultiThread \
        SetVIDPID \
        Simple \
        static \
        Timeouts \
        W32/escapeseq \
        W32/events \
        W32/simple \
        W32/timeouts \
        write \

all: subdirs

subdirs:
        for n in $(SUBDIRS); do "$(MAKE)" -C $$n || exit 1; done

clean:
        rm -f *.o *~
        for n in $(SUBDIRS); do "$(MAKE)" -C $$n clean; done

자, 이제 빌드를 하고 ^^

~# make -B

FTDI 장치를 연결한 후 빌드된 예제 중의 하나인 read 프로그램을 수행해 보면,

$ cd ./EEPROM/read
$ ./read

다음과 같은 식의 출력 결과를 확인할 수 있습니다.

~# ./read
Library version = 0x10408
Opening port 0
FT_Open succeeded.  Handle is 0x2582910
FT_GetDeviceInfo succeeded.  Device is type 5.
FT_EE_Read succeeded.

Signature1 = 0
Signature2 = -1
Version = 2
VendorId = 0x0403
ProductId = 0x6001
Manufacturer = FTDI
ManufacturerId = A9
Description = FT232R USB UART
SerialNumber = A901J4AU
MaxPower = 90
PnP = 0
SelfPowered = 0
RemoteWakeup = 1
232R:
-----
        UseExtOsc = 0x0
        HighDriveIOs = 0x0
        EndpointSize = 0x40
        PullDownEnableR = 0x0
        SerNumEnableR = 0x1
        InvertTXD = 0x0
        InvertRXD = 0x0
        InvertRTS = 0x0
        InvertCTS = 0x0
        InvertDTR = 0x0
        InvertDSR = 0x0
        InvertDCD = 0x0
        InvertRI = 0x0
        Cbus0 = 0x3
        Cbus1 = 0x2
        Cbus2 = 0x0
        Cbus3 = 0x1
        Cbus4 = 0x5
        RIsD2XX = 0x0
Returning 0

일단은 좋은 소식입니다. 그런데, 소스 코드를 보면 직렬 통신을 이용하지 않고 FTDI 라이브러리를 직접 사용하는 것을 볼 수 있습니다.

$ cat main.c

/*
        To build use the following gcc statement
        (assuming you have the d2xx library in the /usr/local/lib directory).
        gcc -o read main.c -L. -lftd2xx -Wl,-rpath,/usr/local/lib
*/

#include <stdio.h>
#include <stdlib.h>
#include <sys/time.h>
#include "../../ftd2xx.h"

int main(int argc, char *argv[])
{
        FT_STATUS       ftStatus;
        FT_HANDLE       ftHandle0;
        int iport;
        static FT_PROGRAM_DATA Data;
        static FT_DEVICE ftDevice;
        DWORD libraryVersion = 0;
        int retCode = 0;

        ftStatus = FT_GetLibraryVersion(&libraryVersion);
        if (ftStatus == FT_OK)
        {
                printf("Library version = 0x%x\n", (unsigned int)libraryVersion);
        }
        else
        {
                printf("Error reading library version.\n");
                return 1;
        }

        if(argc > 1) {
                sscanf(argv[1], "%d", &iport);
        }
        else {
                iport = 0;
        }
        printf("Opening port %d\n", iport);

        ftStatus = FT_Open(iport, &ftHandle0);
        if(ftStatus != FT_OK) {
                /*
                        This can fail if the ftdi_sio driver is loaded
                        use lsmod to check this and rmmod ftdi_sio to remove
                        also rmmod usbserial
                 */
                printf("FT_Open(%d) failed\n", iport);
                return 1;
        }

        printf("FT_Open succeeded.  Handle is %p\n", ftHandle0);

        ftStatus = FT_GetDeviceInfo(ftHandle0,
                                    &ftDevice,
                                    NULL,
                                    NULL,
                                    NULL,
                                    NULL);
        if (ftStatus != FT_OK)
        {
                printf("FT_GetDeviceType FAILED!\n");
                retCode = 1;
                goto exit;
        }

        // ...[생략]...

        FT_Close(ftHandle0);
        printf("Returning %d\n", retCode);
        return retCode;
}

비록 시리얼 통신으로 제어할 수는 없지만 일단 어떻게든 제어할 수 있게 되었으니 이 정도에서 ^^ 만족하겠습니다.




참고로, FTDI 장치를 연결한 상태에서 lsusb 명령어를 내리면 다음과 같은 출력을 보입니다.

$ lsusb
|__usb1          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (xhci_hcd 0000:00:14.0) hub
  |__1-2         0403:6001:0600 00  2.00   12MBit/s 90mA 1IF  (FTDI FT232R USB UART A901J4AU)
  |__1-5         f400:f400:0100 00  2.00  480MBit/s 200mA 1IF  (Synology DiskStation 650076B3CCCA6016)
|__usb2          1d6b:0003:0310 09  3.00 5000MBit/s 0mA 1IF  (xhci_hcd 0000:00:14.0) hub

출력 결과의 xxxx:xxxx:xxxx 형식은 각각 device_id:vendor_id:revision을 의미합니다. 예를 들어, usb1의 1-2 장치인 경우 device id = 0x0403, vendor id = 0x6001, revision = 6.0이 됩니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]







[최초 등록일: ]
[최종 수정일: 10/11/2018]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 61  62  63  64  65  66  67  68  69  70  71  72  73  74  [75]  ...
NoWriterDateCnt.TitleFile(s)
12153정성태2/23/202024307.NET Framework: 898. Trampoline을 이용한 후킹의 한계파일 다운로드1
12152정성태2/23/202021339.NET Framework: 897. 실행 시에 메서드 가로채기 - CLR Injection: Runtime Method Replacer 개선 - 세 번째 이야기(Trampoline 후킹)파일 다운로드1
12151정성태2/22/202023987.NET Framework: 896. C# - Win32 API를 Trampoline 기법을 이용해 C# 메서드로 가로채는 방법 - 두 번째 이야기 (원본 함수 호출)파일 다운로드1
12150정성태2/21/202024078.NET Framework: 895. C# - Win32 API를 Trampoline 기법을 이용해 C# 메서드로 가로채는 방법 [1]파일 다운로드1
12149정성태2/20/202020977.NET Framework: 894. eBEST C# XingAPI 래퍼 - 연속 조회 처리 방법 [1]
12148정성태2/19/202025609디버깅 기술: 163. x64 환경에서 구현하는 다양한 Trampoline 기법 [1]
12147정성태2/19/202020964디버깅 기술: 162. x86/x64의 기계어 코드 최대 길이
12146정성태2/18/202022180.NET Framework: 893. eBEST C# XingAPI 래퍼 - 로그인 처리파일 다운로드1
12145정성태2/18/202023788.NET Framework: 892. eBEST C# XingAPI 래퍼 - Sqlite 지원 추가파일 다운로드1
12144정성태2/13/202023989.NET Framework: 891. 실행 시에 메서드 가로채기 - CLR Injection: Runtime Method Replacer 개선 - 두 번째 이야기파일 다운로드1
12143정성태2/13/202018392.NET Framework: 890. 상황별 GetFunctionPointer 반환값 정리 - x64파일 다운로드1
12142정성태2/12/202022301.NET Framework: 889. C# 코드로 접근하는 MethodDesc, MethodTable파일 다운로드1
12141정성태2/10/202021281.NET Framework: 888. C# - ASP.NET Core 웹 응용 프로그램의 출력 가로채기 [2]파일 다운로드1
12140정성태2/10/202022654.NET Framework: 887. C# - ASP.NET 웹 응용 프로그램의 출력 가로채기파일 다운로드1
12139정성태2/9/202022309.NET Framework: 886. C# - Console 응용 프로그램에서 UI 스레드 구현 방법
12138정성태2/9/202028560.NET Framework: 885. C# - 닷넷 응용 프로그램에서 SQLite 사용 [6]파일 다운로드1
12137정성태2/9/202020201오류 유형: 592. [AhnLab] 경고 - 디버거 실행을 탐지했습니다.
12136정성태2/6/202021863Windows: 168. Windows + S(또는 Q)로 뜨는 작업 표시줄의 검색 바가 동작하지 않는 경우
12135정성태2/6/202027654개발 환경 구성: 468. Nuget 패키지의 로컬 보관 폴더를 옮기는 방법 [2]
12134정성태2/5/202024920.NET Framework: 884. eBEST XingAPI의 C# 래퍼 버전 - XingAPINet Nuget 패키지 [5]파일 다운로드1
12133정성태2/5/202022670디버깅 기술: 161. Windbg 환경에서 확인해 본 .NET 메서드 JIT 컴파일 전과 후 - 두 번째 이야기
12132정성태1/28/202025706.NET Framework: 883. C#으로 구현하는 Win32 API 후킹(예: Sleep 호출 가로채기) [1]파일 다운로드1
12131정성태1/27/202024425개발 환경 구성: 467. LocaleEmulator를 이용해 유니코드를 지원하지 않는(한글이 깨지는) 프로그램을 실행하는 방법 [1]
12130정성태1/26/202022027VS.NET IDE: 142. Visual Studio에서 windbg의 "Open Executable..."처럼 EXE를 직접 열어 디버깅을 시작하는 방법
12129정성태1/26/202029002.NET Framework: 882. C# - 키움 Open API+ 사용 시 Registry 등록 없이 KHOpenAPI.ocx 사용하는 방법 [3]
12128정성태1/26/202023143오류 유형: 591. The code execution cannot proceed because mfc100.dll was not found. Reinstalling the program may fix this problem.
... 61  62  63  64  65  66  67  68  69  70  71  72  73  74  [75]  ...