Microsoft MVP성태의 닷넷 이야기
사물인터넷: 52. New NodeMCU v3(ESP8266)의 http 통신 [링크 복사], [링크+제목 복사],
조회: 22746
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
(연관된 글이 3개 있습니다.)

New NodeMCU v3(ESP8266)의 http 통신

지난번에 ESP8266 보드에 대한 간단한 코딩을 해봤는데요.

New NodeMCU v3 아두이노 호환 보드의 기본 개발 환경 구성
; https://www.sysnet.pe.kr/2/0/11595

New NodeMCU v3 아두이노 호환 보드의 내장 LED 및 입력 핀 사용법
; https://www.sysnet.pe.kr/2/0/11605

사실 NodeMCU의 가장 큰 장점은 WiFi 지원이므로 이를 위한 소켓 통신 - 그중에서도 HTTP 통신을 빼놓을 수 없습니다. 지난 글에서 WiFiServer 클래스를 이용해 웹 서버로 동작하는 간단한 코드를 작성해 봤으니, 이번에는 WiFiClient를 이용한 다른 웹 서버로의 접속을 간단하게 작성해 봤습니다.

// [참고 소스 코드] esp8266/Arduino
// https://github.com/esp8266/Arduino/blob/master/doc/esp8266wifi/client-examples.rst

#include <ESP8266WiFi.h>
#include <ESP8266WiFiAP.h>
#include <ESP8266WiFiGeneric.h>
#include <ESP8266WiFiMulti.h>
#include <ESP8266WiFiScan.h>
#include <ESP8266WiFiSTA.h>
#include <ESP8266WiFiType.h>
#include <WiFiClient.h>
#include <WiFiClientSecure.h>
#include <WiFiServer.h>
#include <WiFiServerSecure.h>
#include <WiFiUdp.h>

const char *ssid = "...무선 ssdi...";
const char *password = "...무선 password..."; 
int _buildLedPin = 2;

void setup()
{
  Serial.begin(115200);
  delay(10);

  Serial.printf("%d: Connecting to %d\n", millis(), ssid);
  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED)
  {
    delay(1000);
    Serial.print(".");
  }

  Serial.printf("\n%d: WiFi connected: %s\n", millis(), WiFi.localIP().toString().c_str());
  pinMode(_buildLedPin, OUTPUT);
}

void loop()
{
  WiFiClient client;
  String host = "www.naver.com";

  bool connected = client.connect(host, 80);

  Serial.printf("%d: Connected - %d\n", millis(), connected);

  do
  {
    if (connected == false)
    {
      break;
    }

    client.print(String("GET /") + " HTTP/1.1\r\n" + 
            "Host: " + host + "\r\n" +
            "Connection: close\r\n" + "\r\n");

    int readBytes = 0;
    while (client.connected() == 1)
    {
      if (client.available())
      {
        // 아래의 코드 영역만 원하는 용도에 맞게 재구성
        String line = client.readStringUntil('\n');
        readBytes += line.length();
      }
    }

    Serial.printf("%d: # of recv bytes: %d\n", millis(), readBytes);

    Blink(2000);
  } while (false);

  client.stop();
}

void Blink(int ledOnTime)
{
  digitalWrite(_buildLedPin, LOW);
  delay(ledOnTime);
  digitalWrite(_buildLedPin, HIGH);
  delay(ledOnTime);
}

(첨부 파일은 이 글의 예제를 vscode 양식으로 포함합니다.)




개발 환경으로 Visual Studio Code를 사용하는 경우, 빌드 후 배포한 다음 소스 코드 변경 없이 다시 Verify나 Upload를 하게 되면 다음과 같은 경고를 보게 됩니다.

[Warning] Output path is not specified. Unable to reuse previously compiled files. Upload could be slow. See README.

왜냐하면, Visual Studio Code는 "Output" 경로가 명시되어 있지 않으면 임시 폴더를 사용하게 되고 이게 빌드 때마다 생성하기 때문에 전체적으로 바이너리 생성 속도가 상당히 느립니다. 사용하게 되는 임시 폴더의 경로는 빌드 출력 결과에 보면 다음과 같은 식으로 찾을 수 있습니다. (빌드 완료 후 해당 폴더는 삭제됩니다.)

Uploading 262496 bytes from %LOCALAPPDATA%\Temp\arduino_build_200452/http_get.ino.bin to flash at 0x00000000

빌드 중간 결과물을 보존하게 되면 이후의 빌드에서 좀 더 빠르게 작업이 진행되는데 이를 위해 arduino.json 파일의,

./.vscode/arduino.json

설정에 "output" 항목을 다음과 같이 추가하면 됩니다.

{
    "sketch": "http_get.ino",
    "board": "esp8266:esp8266:d1",
    "configuration": "CpuFrequency=80,...[생략]...",
    "port": "COM3",
    "output": "../build"
}

쉽게 말해, output 설정은 거의 필수 항목이라고 봐도 무방합니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 5/5/2021]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 106  107  108  109  [110]  111  112  113  114  115  116  117  118  119  120  ...
NoWriterDateCnt.TitleFile(s)
11216정성태6/1/201720016오류 유형: 396. Activation context generation failed
11215정성태6/1/201722018오류 유형: 395. 관리 콘솔을 실행하면 "This app has been blocked for your protection" 오류 발생 [1]
11214정성태6/1/201719150오류 유형: 394. MSDTC 서비스 시작 시 -1073737712(0xC0001010) 오류와 함께 종료되는 문제 [1]
11213정성태5/26/201724785오류 유형: 393. TFS - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
11212정성태5/26/201723978오류 유형: 392. Windows Server 2016에 KB4019472 업데이트가 실패하는 경우
11211정성태5/26/201722793오류 유형: 391. BeginInvoke에 전달한 람다 함수에 CS1660 에러가 발생하는 경우
11210정성태5/25/201723058기타: 65. ActiveX 없는 전자 메일에 사용된 "개인정보 보호를 위해 암호화된 보안메일"의 암호화 방법
11209정성태5/25/201771005Windows: 143. Windows 10의 Recovery 파티션을 삭제 및 새로 생성하는 방법 [16]
11208정성태5/25/201729277오류 유형: 390. diskpart의 set id 명령어에서 "The specified type is not in the correct format." 오류 발생
11207정성태5/24/201730539Windows: 142. Windows 10의 복구 콘솔로 부팅하는 방법
11206정성태5/24/201723730오류 유형: 389. DISM.exe - The specified image in the specified wim is already mounted for read/write access.
11205정성태5/24/201723251.NET Framework: 658. C#의 tail call 구현은? [1]
11204정성태5/22/201732731개발 환경 구성: 316. 간단하게 살펴보는 Docker for Windows [7]
11203정성태5/19/201720007오류 유형: 388. docker - Host does not exist: "default"
11202정성태5/19/201721379오류 유형: 387. WPF - There is no registered CultureInfo with the IetfLanguageTag 'ug'.
11201정성태5/16/201724788오류 유형: 386. WPF - .NET 3.5 이하에서 TextBox에 한글 입력 시 TextChanged 이벤트의 비정상 종료 문제 [1]파일 다운로드1
11200정성태5/16/201721571오류 유형: 385. WPF - 폰트가 없어 System.IO.FileNotFoundException 예외가 발생하는 경우
11199정성태5/16/201722572.NET Framework: 657. CultureInfo.GetCultures가 반환하는 값
11198정성태5/10/201724870.NET Framework: 656. Windows Forms의 오류(Exception) 처리 방법에 대한 차이점 설명
11197정성태5/8/201720830개발 환경 구성: 315. VHD 파일의 최소 크기파일 다운로드1
11196정성태5/4/201722391오류 유형: 384. Msvm_ImageManagementService WMI 객체를 사용할 때 오류 상황 정리 [1]
11195정성태5/3/201723221.NET Framework: 655. .NET Framework 4.7 릴리스
11194정성태5/3/201724653오류 유형: 383. net use 명령어로 네트워크 드라이브 연결 시 "System error 67 has occurred." 오류 발생
11193정성태5/3/201722494Windows: 141. 설치된 Windows로부터 설치 이미지를 만드는 방법
11192정성태5/2/201724099Windows: 140. unattended.xml/autounattend.xml 파일을 마련하는 방법
11191정성태5/2/201724934Windows: 139. Dell Venue 8 Pro 태블릿에 USB를 이용한 윈도우 운영체제 설치 방법
... 106  107  108  109  [110]  111  112  113  114  115  116  117  118  119  120  ...