Microsoft MVP성태의 닷넷 이야기
Linux: 10. 윈도우의 GetTickCount와 리눅스의 clock_gettime [링크 복사], [링크+제목 복사],
조회: 26609
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
(연관된 글이 1개 있습니다.)

윈도우의 GetTickCount와 리눅스의 clock_gettime

GetTickCount에 대한,

윈도우 운영체제의 시간 함수 (1) - GetTickCount와 timeGetTime의 차이점
; https://www.sysnet.pe.kr/2/0/11063

리눅스의 대응 함수를 찾는 중에 std::clock 함수가 눈에 들어왔습니다.

std::clock
; https://en.cppreference.com/w/cpp/chrono/c/clock

그래서 다음과 같이 테스트했더니,

clock_t dwStart = std::clock();
usleep(1000 * 1000); // 1초 sleep
clock_t dwEnd = std::clock();

clock_t dwDiff = dwEnd - dwStart;
printf("%d\n", dwDiff); // 출력 결과 0

0이 나옵니다. ^^; 왜냐하면, std::clock은 내부적으로 clock_gettime을 호출하는데, strace로 확인해 보면 CLOCK_PROCESS_CPUTIME_ID로 호출하는 것과 같습니다.

struct timespec tspec;
clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &tspec); // == std::clock();

인자가 의미하는 바에 따라,

/* High-resolution timer from the CPU.  */
# define CLOCK_PROCESS_CPUTIME_ID	2

/* Thread-specific CPU-time clock.  */
# define CLOCK_THREAD_CPUTIME_ID	3

이것은 해당 프로세서(CPU)를 사용한 시간을 반환하는 것으로 usleep 등으로 인해 작업을 하지 않은 경우에는 CPU 사용을 하지 않았으므로 0에 가까운 값을 반환하는 것입니다. 윈도우 환경으로 말하면 GetProcessTimes에 해당하는 것입니다.

그런데, 엄밀히 따지면 std::clock으로 유효하지 않은 값을 반환하는 경우가 발생할 수 있습니다. 가령 다음과 같은 상황에서,

clock_t dwStart = std::clock();
// ... 복잡한 작업 ...
clock_t dwEnd = std::clock();

중간의 작업을 하다가 스레드 문맥 전환이 발생해 다른 스레드가 해당 CPU에서 스케줄링되면 std::clock은 그 스레드가 수행한 작업량까지 더한 값을 반환하게 됩니다. 따라서 그런 문제를 없애고 싶다면 std::clock보다는 clock_gettime에 CLOCK_THREAD_CPUTIME_ID 옵션으로 직접 호출하는 것이 맞을 것입니다.

struct timespec tspec;
clock_gettime(CLOCK_THREAD_CPUTIME_ID, &tspec); // 윈도우의 GetCpuTimes




GetTickCount에 해당하는 작업은 clock_gettime에 CLOCK_REALTIME_COARSE를 주면 됩니다.

/* Identifier for system-wide realtime clock, updated only on ticks.  */
# define CLOCK_REALTIME_COARSE      5

clock_gettime(CLOCK_REALTIME_COARSE, &tspec); // 윈도우의 GetTickCount();

또는, 윈도우의 QueryPerformanceCounter라면 CLOCK_MONOTONIC을 주는 것이 그나마 의미상 비슷할 것입니다.

/* Monotonic system-wide clock.  */
# define CLOCK_MONOTONIC		1

clock_gettime(CLOCK_MONOTONIC, &tspec); // 윈도우의 QueryPerformanceCounter();

참고로, CLOCK_MONOTONIC과 유사하게 CLOCK_REALTIME이 있긴 한데,

/* Identifier for system-wide realtime clock.  */
# define CLOCK_REALTIME         0

주석에서 보는 바와 같이,

System-wide clock that measures real (i.e., wall-clock) time. Setting this clock requires appropriate privileges. This clock is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the clock), and by the incremental adjustments performed by adjtime(3) and NTP.


구간의 시간을 취합하기에는 적절한 옵션이 아닙니다.




그런데, clock_gettime을 이용해 구간 내 시간을 측정하려면 약간의 계산을 요합니다. 가령, 다음과 같이 시간 측정을 하면,

struct timespec s_tspec;
struct timespec e_tspec;

{
    clock_gettime(CLOCK_MONOTONIC, &s_tspec);
    usleep(1500 * 1000);
    clock_gettime(CLOCK_MONOTONIC, &e_tspec);
}

timespec 구조체는,

/* POSIX.1b structure for a time value.  This is like a `struct timeval' but
   has nanoseconds instead of microseconds.  */
struct timespec
{
  __time_t tv_sec;		/* Seconds.  */
  __syscall_slong_t tv_nsec;	/* Nanoseconds.  */
};

흐른 시간 값에 대해 초와 나노초 단위로 분리해 보관하고 있기 때문에 다음과 같은 식으로 흐른 시간을 계산해야 합니다.

// Profiling Code Using clock_gettime
// ; https://www.guyrutenberg.com/2007/09/22/profiling-code-using-clock_gettime/

#define NANO_PER_SEC ((__clock_t) 1000000000)

timespec diff(timespec start, timespec end)
{
    timespec temp;
    if ((end.tv_nsec - start.tv_nsec) < 0) {
        temp.tv_sec = end.tv_sec - start.tv_sec - 1;
        temp.tv_nsec = NANO_PER_SEC + end.tv_nsec - start.tv_nsec;
    }
    else {
        temp.tv_sec = end.tv_sec - start.tv_sec;
        temp.tv_nsec = end.tv_nsec - start.tv_nsec;
    }
    return temp;
}

그리고 그 timespec을 다시 특정 시간 단위로 환산해서 구할 수 있습니다.

#define NANO_PER_MILLI  ((__clock_t) 1000000)
#define MILLI_PER_SEC  ((__clock_t) 1000)

clock_t gettotalnanosec(const timespec& time)
{
    return time.tv_sec * NANO_PER_SEC + time.tv_nsec;
}

clock_t gettotalmillisec(const timespec& time)
{
    return time.tv_sec * MILLI_PER_SEC + time.tv_nsec / NANO_PER_MILLI;
}

따라서, 대충 다음과 같은 식으로 구간별 시간을 측정할 수 있습니다.

{
    struct timespec s_tspec;
    struct timespec e_tspec;

    clock_gettime(CLOCK_MONOTONIC, &s_tspec);
    usleep(500 * 1000);
    clock_gettime(CLOCK_MONOTONIC, &e_tspec);

    timespec diffspec = diff(s_tspec, e_tspec);
    clock_t timeDiff = gettotalmillisec(diffspec);

    printf("%lu\n", timeDiff);
}

(첨부 파일은 이 글의 예제 코드를 포함합니다.)




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 5/24/2019]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... [136]  137  138  139  140  141  142  143  144  145  146  147  148  149  150  ...
NoWriterDateCnt.TitleFile(s)
1746정성태9/18/201428412.NET Framework: 461. .NET EXE 파일을 닷넷 프레임워크 버전에 상관없이 실행할 수 있을까요? - 두 번째 이야기 [6]파일 다운로드1
1745정성태9/17/201426678개발 환경 구성: 237. 리눅스 Integration Services 버전 업그레이드 하는 방법 [1]
1744정성태9/17/201434930.NET Framework: 460. GetTickCount / GetTickCount64와 0x7FFE0000 주솟값 [4]파일 다운로드1
1743정성태9/16/201424343오류 유형: 238. 설치 오류 - Failed to get size of pseudo bundle
1742정성태8/27/201431063개발 환경 구성: 236. Hyper-V에 설치한 리눅스 VM의 VHD 크기 늘리는 방법 [2]
1741정성태8/26/201424769.NET Framework: 459. GetModuleHandleEx로 알아보는 .NET 메서드의 DLL 모듈 관계파일 다운로드1
1740정성태8/25/201436549.NET Framework: 458. 닷넷 GC가 순환 참조를 해제할 수 있을까요? [2]파일 다운로드1
1739정성태8/24/201430234.NET Framework: 457. 교착상태(Dead-lock) 해결 방법 - Lock Leveling [2]파일 다운로드1
1738정성태8/23/201426139.NET Framework: 456. C# - CAS를 이용한 Lock 래퍼 클래스파일 다운로드1
1737정성태8/20/201422675VS.NET IDE: 93. Visual Studio 2013 동기화 문제
1736정성태8/19/201429315VC++: 79. [부연] CAS Lock 알고리즘은 과연 빠른가? [2]파일 다운로드1
1735정성태8/19/201422095.NET Framework: 455. 닷넷 사용자 정의 예외 클래스의 최소 구현 코드 - 두 번째 이야기
1734정성태8/13/201423651오류 유형: 237. Windows Media Player cannot access the file. The file might be in use, you might not have access to the computer where the file is stored, or your proxy settings might not be correct.
1733정성태8/13/201429863.NET Framework: 454. EmptyWorkingSet Win32 API를 사용하는 C# 예제파일 다운로드1
1732정성태8/13/201438610Windows: 99. INetCache 폴더가 다르게 보이는 이유
1731정성태8/11/201430554개발 환경 구성: 235. 점(.)으로 시작하는 파일명을 탐색기에서 만드는 방법
1730정성태8/11/201425890개발 환경 구성: 234. Royal TS의 터미널(Terminal) 연결에서 한글이 깨지는 현상 해결 방법
1729정성태8/11/201421737오류 유형: 236. SqlConnection - The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
1728정성태8/8/201434503.NET Framework: 453. C# - 오피스 파워포인트(Powerpoint) 파일을 WinForm에서 보는 방법파일 다운로드1
1727정성태8/6/201424780오류 유형: 235. SignalR 오류 메시지 - Counter 'Messages Bus Messages Published Total' does not exist in the specified Category. [2]
1726정성태8/6/201423097오류 유형: 234. IIS Express에서 COM+ 사용 시 SecurityException - "Requested registry access is not allowed" 발생
1725정성태8/6/201425255오류 유형: 233. Visual Studio 2013 Update3 적용 후 Microsoft.VisualStudio.Web.PageInspector.Runtime 모듈에 대한 FileNotFoundException 예외 발생
1724정성태8/5/201429880.NET Framework: 452. .NET System.Threading.Thread 개체에서 Native Thread Id를 구하는 방법 - 두 번째 이야기 [1]파일 다운로드1
1723정성태7/29/201462584개발 환경 구성: 233. DirectX 9 예제 프로젝트 빌드하는 방법 [3]파일 다운로드1
1722정성태7/25/201424662오류 유형: 232. IIS 500 Internal Server Error - NTFS 암호화된 폴더에 웹 애플리케이션이 위치한 경우
1721정성태7/24/201428413.NET Framework: 451. 함수형 프로그래밍 개념 - 리스트 해석(List Comprehension)과 순수 함수 [2]
... [136]  137  138  139  140  141  142  143  144  145  146  147  148  149  150  ...