"Administered port exclusions"이 아닌 포트 범위 항목을 삭제하는 방법
지난번 글에서,
"Administered port exclusions" 설명
; https://www.sysnet.pe.kr/2/0/12293
netsh로 추가하지 않은 항목의 경우, 즉
CreatePersistentTcpPortReservation /
CreatePersistentUdpPortReservation 함수로 직접 생성한 항목은 netsh로 삭제 시 "Access is denied." 오류가 발생한다고 설명했습니다.
어쩔 수 없습니다. 저 설정을 지우기 위해 "netsh int ip reset"을 하는 것은 좀 그렇고, 그냥 유틸리티를 하나 만들기로 했습니다.
stjeong / Utilities / excludedportrange
; https://github.com/stjeong/Utilities/tree/master/excludedportrange
excludedportrange
; https://github.com/stjeong/Utilities/releases/
위의 바이너리를 다운로드해도 되고, 아래의 소스 코드를 직접 빌드해 사용해도 됩니다.
using System;
using System.IO;
using System.Net;
using System.Reflection;
using System.Runtime.InteropServices;
namespace excludedportrange
{
class Program
{
[DllImport("Iphlpapi.dll")]
internal static extern uint DeletePersistentTcpPortReservation(ushort startPort, ushort numberOfPorts);
[DllImport("Iphlpapi.dll")]
internal static extern uint DeletePersistentUdpPortReservation(ushort startPort, ushort numberOfPorts);
static int Main(string[] args)
{
string mode;
ushort startPort;
ushort numberOfPorts;
if (args.Length > 2)
{
mode = args[0];
startPort = ushort.Parse(args[1]);
ushort endPort = ushort.Parse(args[2]);
if (startPort > endPort)
{
Help();
return 0;
}
numberOfPorts = (ushort)(endPort - startPort + 1);
}
else
{
Help();
return 0;
}
ushort portToDelete = (ushort)IPAddress.HostToNetworkOrder((short)startPort);
int result = 0;
Console.WriteLine($"{mode} Deleting... {startPort}:{numberOfPorts}");
switch (mode)
{
case "tcp":
result = (int)DeletePersistentTcpPortReservation(portToDelete, numberOfPorts);
break;
case "udp":
result = (int)DeletePersistentUdpPortReservation(portToDelete, numberOfPorts);
break;
}
Console.WriteLine(result);
return result;
}
static void Help()
{
string appName = Path.GetFileName(Assembly.GetExecutingAssembly().Location);
Console.WriteLine($"{appName} [tcp|udp] [startport] [endport]");
Console.WriteLine($"ex)");
Console.WriteLine($"\t{appName} tcp 15000 15550");
}
}
}
예를 들어, 다음과 같은 excludedportrange 설정이 있을 때,
C:\Windows\System32> netsh int ipv4 show excludedportrange protocol=tcp
Protocol tcp Port Exclusion Ranges
Start Port End Port
---------- --------
80 80
1241 1340
1341 1440
1565 1664
1665 1764
1955 2054
2055 2154
5357 5357
8060 8060
11735 11834
11835 11934
11935 12034
15000 15000
26974 27073
27074 27173
27174 27273
44363 44363
50000 50059 *
* - Administered port exclusions.
항목 중에서 "Start Port == 1341, End Port == 1440" 설정을 삭제하고 싶다면 다음과 같이 실행할 수 있습니다.
[관리자 권한으로 실행]
C:\temp> excludedportrange.exe tcp 1341 1440
tcp Deleting... 1341:100
0
참고로, DeletePersistentTcpPortReservation / DeletePersistentUdpPortReservation의 반환 값으로 1168(0x490: Element not found)이 나온다면?
StartPort의 인자가 "network byte order"이기 때문에 일반 포트 값을 그대로 사용하면 안 되고, C#의 경우라면 다음과 같은 식으로 변환한 후 사용해야 합니다.
ushort portToDelete = (ushort)IPAddress.HostToNetworkOrder((short)startPort);
[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]