Microsoft MVP성태의 닷넷 이야기
Windows: 188. Windows - TCP default template 설정 방법 [링크 복사], [링크+제목 복사],
조회: 18501
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Windows - TCP default template 설정 방법

지난 글에서,

윈도우 환경에서 클라이언트 소켓의 최대 접속 수 (4) - ReuseUnicastPort를 이용한 포트 고갈 문제 해결
; https://www.sysnet.pe.kr/2/0/12435

AutoReusePortRangeStartPort / AutoReusePortRangeNumberOfPorts 값을 어떤 NetTcpSetting에서 바꿔야 할지 몰라 전체를 다 변경했었는데요. 보니까, netsh로 알아내는 방법이 있습니다. 가령, 제 컴퓨터(Windows 10)에서 다음과 같은 메시지가 확인됩니다.

c:\temp> netsh interface tcp show supplemental

The TCP global default template is internet

TCP Supplemental Parameters
----------------------------------------------
Minimum RTO (msec)                  : 300
...[생략]...

Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

c:\temp> netsh interface tcp show supplemental help

Usage: show supplemental [[template=]automatic|datacenter|internet|compat|custom]

       template  - One of the following values:
                   datacenter, automatic, compat, internet, internetcustom, datacentercustom.

Remarks: Shows TCP supplemental parameters that affect filtered connections.
         When no parameters are specified, the TCP default global template
         is shown. If the template= parameter is specified then the specified
         template is shown.

그렇습니다. InternetCustom, DatacenterCustom, Internet, Datacenter 중에 제 컴퓨터에서는 Internet 설정으로 맞춰져 있는 것입니다. 테스트를 위해 Azure에 생성해 둔 VM(Windows Server 2016)에서도 확인을 해보니 다음과 같이 나옵니다.

c:\temp> netsh interface tcp show supplemental

The TCP global default template is automatic


Automatic mode picks between Internet and Datacenter templates based on
TCP connection parameters.

Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

아하... 그러니까 RTT 상황에 따라 Internet과 Datacenter 설정을 자동으로 선택해 준다는 것입니다.




프로그래밍을 염두에 둔다면 netsh 명령어의 출력에 의존할 수는 없습니다. 다른 방법이 없을까 싶어 찾아봤더니 다음의 글에 PowerShell을 이용한 방법이 나옵니다.

How does Windows decide which setting/template (Internet vs Datacenter) is applied to TCP connections?
; https://stackoverflow.com/questions/34619815/how-does-windows-decide-which-setting-template-internet-vs-datacenter-is-appli

Get-NetTransportFilter 명령어를 제가 실습했던 Windows 10, Windows Server 2016에 대해 각각 실행해 보니 netsh의 출력과 동일한 결과를 얻을 수 있었습니다.

// Windows 10

PS C:\Users\testusr> Get-NetTransportFilter

SettingName       : Internet
Protocol          : TCP
LocalPortStart    : 0
LocalPortEnd      : 65535
RemotePortStart   : 0
RemotePortEnd     : 65535
DestinationPrefix : *

// Window Server 2016

PS C:\Users\testusr> Get-NetTransportFilter

SettingName       : Automatic
...[생략]...




당연히 이 값을 바꾸는 것도 가능할 텐데요, 이에 대한 것도 다음의 글에서 찾을 수 있었습니다.

Set-NetTCPSetting still incomplete code in windows 10?
; https://www.neowin.net/forum/topic/1271672-set-nettcpsetting-still-incomplete-code-in-windows-10/

그래서 netsh을 이용해 다음과 같이 제어할 수 있습니다.

// Windows Server 2016

C:\Users\testusr> netsh int tcp set supplemental template=Internet
Ok.

C:\Users\testusr> netsh interface tcp show supplemental

The TCP global default template is internet

TCP Supplemental Parameters
----------------------------------------------
...[생략]...
Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

C:\Users\testusr> netsh int tcp set supplemental template=automatic
Ok.

C:\Users\testusr> netsh interface tcp show supplemental

The TCP global default template is automatic

Automatic mode picks between Internet and Datacenter templates based on
TCP connection parameters.

Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

하지만 아쉽게도 클라이언트 운영체제에서는 이런 오류가 발생합니다.

C:\Users\testusr> netsh int tcp set supplemental template=automatic

Set supplemental command failed to set the global default template. The parameter is incorrect.

이런저런 면을 고려했을 때, 어쩌면 그냥 전체적으로 일괄 적용하는 것이 더 좋을 듯합니다. ^^




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 3/28/2021]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 106  107  108  109  110  111  112  113  114  115  [116]  117  118  119  120  ...
NoWriterDateCnt.TitleFile(s)
11060정성태10/12/201624178오류 유형: 359. WCF - .svc 요청시 404 Not Found
11059정성태10/11/201628958.NET Framework: 609. WPF - 다중 스레드 환경에서 데이터 바인딩의 INotifyPropertyChanged.PropertyChanged에 대한 배려 [1]파일 다운로드1
11058정성태10/8/201624060개발 환경 구성: 303. Windows 10 Bash Shell - 한글 환경을 영문으로 바꾸고 싶다면?
11057정성태10/8/201618574오류 유형: 358. Windows 10 bash shell - sudo: unable to resolve host ...
11056정성태10/8/201622379개발 환경 구성: 302. Windows 10 bash shell 시작 시 [...] packages can be updated.
11055정성태10/8/201623418.NET Framework: 608. double 값을 구할 때는 반드시 피연산자를 double로 형변환! [6]
11054정성태10/5/201627437개발 환경 구성: 301. "Let's Encrypt" SSL 인증서를 Azure Cloud Services(classic)에 업데이트하는 방법
11053정성태10/5/201622059.NET Framework: 607. C# try/catch/finally의 IL 코드 표현
11052정성태9/27/201635956개발 환경 구성: 300. C# DLL에서 Win32 C/C++처럼 dllexport 함수를 제공하는 방법 [7]파일 다운로드1
11051정성태9/25/201623183개발 환경 구성: 299. docker - c:\programdata\docker\windowsfilter 폴더 정리하는 방법파일 다운로드1
11050정성태9/24/201628051VC++: 101. 반올림하지 않고 double 변수 값 출력하는 방법 [3]
11049정성태9/24/201622385오류 유형: 357. 윈도우 백업 시 오류 - 0x81000037
11048정성태9/24/201623444VC++: 100. 전역 변수 유형별 실행 파일 크기 차이점
11047정성태9/21/201627346기타: 61. algospot.com - 양자화(Quantization) 문제 [2]파일 다운로드1
11046정성태9/15/201629026개발 환경 구성: 298. Windows 10 - bash 실행 시 시작 디렉터리 자동 변경
11045정성태9/15/201621676Windows: 119. Windows 10 - bash 명령어 창을 실행했는데 바로 닫히는 경우
11044정성태9/15/201621894VS.NET IDE: 112. Visual Studio 확장 - 편집 화면 내에서 링크를 누르면 외부 웹 브라우저에서 열기
11043정성태9/15/201622599.NET Framework: 606. .NET 스레드 콜 스택 덤프 (7) - ClrMD(Microsoft.Diagnostics.Runtime)를 이용한 방법 [1]파일 다운로드1
11042정성태9/14/201620676오류 유형: 356. Unknown custom metadata item kind: 6
11041정성태9/10/201620857.NET Framework: 605. CLR4 보안 - yield 구문 내에서 SecurityCritical 메서드 사용 불가 - 2번째 이야기
11040정성태9/10/201628316.NET Framework: 604. C# Windows Forms - Drag & Drop 예제 코드 [2]파일 다운로드1
11039정성태9/9/201624104오류 유형: 355. Visual Studio 빌드 오류 - error CS0122: '__ComObject' is inaccessible due to its protection level
11038정성태9/9/201626723VC++: 99. 서로 다른 프로세스에서 WM_DROPFILES 메시지를 전송하는 방법파일 다운로드1
11037정성태9/8/201629925.NET Framework: 603. socket - shutdown 호출이 필요한 사례파일 다운로드1
11036정성태8/29/201625728개발 환경 구성: 297. 소스 코드가 없는 닷넷 어셈블리를 디버깅할 때 지역 변숫값을 확인하는 방법
11035정성태8/29/201621651오류 유형: 354. .NET Reflector - PDB 생성 화면에서 "Clear Store"를 하면 "Index and length must refer to a location within the string" 예외 발생
... 106  107  108  109  110  111  112  113  114  115  [116]  117  118  119  120  ...