Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 4개 있습니다.)

C# - IPv4, IPv6를 모두 지원하는 서버 소켓 생성 방법

코드는 다음과 같이 간단합니다.

using (Socket sock = new Socket(SocketType.Stream, ProtocolType.Tcp))
{
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

보통 Socket 생성자에 AddressFamily를 함께 지정하는데요,

// IPv4
Socket sock = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);

// IPv6
Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);

(.NET 4.5부터 지원하는) 저걸 생략한 소켓 생성자의 경우,

public Socket(SocketType socketType, ProtocolType protocolType)
    : this(OSSupportsIPv6 ? AddressFamily.InterNetworkV6 : AddressFamily.InterNetwork, socketType, protocolType)
{
    if (OSSupportsIPv6)
    {
        DualMode = true;
    }
}

보는 바와 같이 운영체제가 IPv6를 지원하는 경우라면 기본적으로 InterNetworkV6로 초기화가 됩니다. 그러면서 동시에 (.NET 4.5부터 지원하는) DualMode 속성이 true로 바뀌는데요,

// NOTE: on *nix, the OS IP stack changes a dual-mode socket back to a
//       normal IPv6 socket once the socket is bound to an IPv6-specific
//       address. This can cause behavioral differences in code that checks
//       the value of DualMode (e.g. the checks in CanTryAddressFamily).
public bool DualMode
{
    get
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            return false;
        }
        return ((int)GetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only)! == 0);
    }
    set
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            throw new NotSupportedException(SR.net_invalidversion);
        }
        SetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only, value ? 0 : 1);
    }
}

즉, SocketOptionName.IPv6Only 옵션을 끄는 역할을 합니다. only 옵션을 껐다는 것은 IPv6/IPv4 듀얼 모드로 동작한다는 것을 의미합니다. 간단하죠? ^^ 따라서 위와 같이 소켓을 생성하는 것은 다음과 같이 바꿔서 표현할 수도 있습니다.

using (Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp))
{
    // Dual Mode Sockets – Never create an IPv4 Socket again
    // https://devblogs.microsoft.com/dotnet/dual-mode-sockets-never-create-an-ipv4-socket-again/
    sock.DualMode = true;
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

기왕이면 코드가 단순한 것이 좋으니 첫 번째 유형으로 쓰고, 단지 그것이 어떤 의미인지만 이 글을 통해 알아두시면 되겠습니다. ^^

참고로, DualMode는 Vista 이후의 운영체제에서만 지원됩니다. 만약 Vista 미만의 운영체제를 지원해야 한다면 IPv4, IPv6 소켓을 각각 생성해 바인딩시켜야 합니다.




IPv6 소켓을 사용하면서 주소는 IPv4를 지정하면,

Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
sock.Bind(new IPEndPoint(IPAddress.Any, 18000));

이런 오류가 발생합니다.

Unhandled exception. System.Net.Sockets.SocketException (10014): The system detected an invalid pointer address in attempting to use a pointer argument in a call.
   at System.Net.Sockets.Socket.UpdateStatusAfterSocketErrorAndThrowException(SocketError error, String callerName)
   at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Bind(EndPoint localEP)
   ...[생략]...




DualMode 속성을 지원하지 않는 .NET 4.5 미만에서는 이렇게!

Tired of creating sockets for each protocol, to make your application listen on all addresses for a given port?
; https://web.archive.org/web/20130909044601/http://blogs.msdn.com/b/malarch/archive/2005/11/18/494769.aspx

There is no more pain. Here is a cool new feature supported in Vista and Windows Server Longhorn. By just setting a socketoption, you will be able to use the same socket to accept connections from both ipv4 and ipv6 clients.

The following sample code shows how to configure the server socket.

static void Main(string[] args)
{
    Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
    sock.SetSocketOption(SocketOptionLevel.IPv6, (SocketOptionName)27, 0);
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 8000));
    sock.Listen(4);
    Socket client = sock.Accept();
    Console.WriteLine("Client has connected successfully with the server");
}

Create an IPv6 socket. Set the socket option IPV6_V6Only to false (by default it is true), to enable the socket to accept connections from ipv4 addresses too. Bind and Listen as usual. Now both ipv4 and ipv6 clients can connect to it
More info can be found in http://www.ietf.org/rfc/rfc3493.txt.

This is because Vista has a completely redesigned TCP/IP stack.

Whereas Windows XP and Win2k3 have a dual stack architecture, i.e., the Tcp, Udp layer is separate for both ipv4 and ipv6 protocols, Vista supports the dual IP layer architecture. That is, Only a single Tcp, Udp layer is present for both the ipv4 and ipv6 protocols.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 11/16/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 



2025-07-11 04시09분
eBPF Mystery: When is IPv4 not IPv4? When it's pretending to be IPv6!
; https://blog.gripdev.xyz/2025/05/06/ebpf-mystery-when-is-ipv4-not-ipv4-when-its-ipv6/

위의 글에서 .NET 5+의 IPv6/IPv4 Dual Mode에 대한 재미있는 시행 착오가 나옵니다.

즉, IPv6 지원을 끈 컴퓨터에서조차도 .NET 5+ 응용 프로그램의 Socket은 기본적으로 IPv6로 소켓을 다루고 있었고, 그것이 가능한 이유가 바로 Dual mode로 설정된 소켓이었기 때문이라고 합니다.

개인적으로는 Dual Mode라는 것이 내부적으로 IPv6 또는 IPv4 소켓으로 자동 생성되는 유형이라고 생각했는데, 그보다는 소켓 자원 자체는 IPv6로 고정인 상태에서 IPv4 통신을 지원하는 유형이었던 것입니다. (참고: RFC1933 - "https://datatracker.ietf.org/doc/html/rfc1933")
정성태

... 16  17  18  19  20  21  22  23  24  [25]  26  27  28  29  30  ...
NoWriterDateCnt.TitleFile(s)
13367정성태6/10/202314898오류 유형: 864. openssl로 만든 pfx 인증서를 Windows Server 2016 이하에서 등록 시 "The password you entered is incorrect" 오류 발생
13366정성태6/10/202313821.NET Framework: 2128. C# - 윈도우 시스템에서 지원하는 암호화 목록(Cipher Suites) 나열파일 다운로드1
13365정성태6/8/202311266오류 유형: 863. MODIFY FILE encountered operating system error 112(failed to retrieve text for this error. Reason: 15105)
13364정성태6/8/202314749.NET Framework: 2127. C# - Ubuntu + Microsoft.Data.SqlClient + SQL Server 2008 R2 연결 방법 [1]
13363정성태6/7/202313846스크립트: 49. 파이썬 - "Transformers (신경망 언어모델 라이브러리) 강좌" - 1장 2절 코드 실행 결과
13362정성태6/1/202312927.NET Framework: 2126. C# - 서버 측의 요청 제어 (Microsoft.AspNetCore.RateLimiting)파일 다운로드1
13361정성태5/31/202313586오류 유형: 862. Facebook - ASP.NET/WebClient 사용 시 graph.facebook.com/me 호출에 대해 403 Forbidden 오류
13360정성태5/31/202312541오류 유형: 861. WSL/docker - failed to start shim: start failed: io.containerd.runc.v2: create new shim socket
13359정성태5/19/202313813오류 유형: 860. Docker Desktop - k8s 초기화 무한 반복한다면?
13358정성태5/17/202314017.NET Framework: 2125. C# - Semantic Kernel의 Semantic Memory 사용 예제 [1]파일 다운로드1
13357정성태5/16/202312530.NET Framework: 2124. C# - Semantic Kernel의 Planner 사용 예제파일 다운로드1
13356정성태5/15/202314891DDK: 10. Device Driver 테스트 설치 관련 오류 (Code 37, Code 31) 및 인증서 관련 정리
13355정성태5/12/202312971.NET Framework: 2123. C# - Semantic Kernel의 ChatGPT 대화 구현 [1]파일 다운로드1
13354정성태5/12/202315210.NET Framework: 2122. C# - "Use Unicode UTF-8 for worldwide language support" 설정을 한 경우, 한글 입력이 '\0' 문자로 처리
13352정성태5/12/202314142.NET Framework: 2121. C# - Semantic Kernel의 대화 문맥 유지파일 다운로드1
13351정성태5/11/202314498VS.NET IDE: 185. Visual Studio - 원격 Docker container 내에 실행 중인 응용 프로그램에 대한 디버깅 [1]
13350정성태5/11/202314188오류 유형: 859. Windows Date and Time - Unable to continue. You do not have permission to perform this task
13349정성태5/11/202313806.NET Framework: 2120. C# - Semantic Kernel의 Skill과 Function 사용 예제 [1]파일 다운로드1
13348정성태5/10/202315488.NET Framework: 2119. C# - Semantic Kernel의 "Basic Loading of the Kernel" 예제
13347정성태5/10/202315752.NET Framework: 2118. C# - Semantic Kernel의 Prompt chaining 예제파일 다운로드1
13346정성태5/10/202315150오류 유형: 858. RDP 원격 환경과 로컬 PC 간의 Ctrl+C, Ctrl+V 복사가 안 되는 문제
13345정성태5/9/202317320.NET Framework: 2117. C# - (OpenAI 기반의) Microsoft Semantic Kernel을 이용한 자연어 처리 [1]파일 다운로드1
13344정성태5/9/202318083.NET Framework: 2116. C# - OpenAI API 사용 - 지원 모델 목록 [1]파일 다운로드1
13343정성태5/9/202315793디버깅 기술: 192. Windbg - Hyper-V VM으로 이더넷 원격 디버깅 연결하는 방법
13342정성태5/8/202313237.NET Framework: 2115. System.Text.Json의 역직렬화 시 필드/속성 주의
13341정성태5/8/202313327닷넷: 2114. C# 12 - 모든 형식의 별칭(Using aliases for any type)
... 16  17  18  19  20  21  22  23  24  [25]  26  27  28  29  30  ...