Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 4개 있습니다.)

C# - IPv4, IPv6를 모두 지원하는 서버 소켓 생성 방법

코드는 다음과 같이 간단합니다.

using (Socket sock = new Socket(SocketType.Stream, ProtocolType.Tcp))
{
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

보통 Socket 생성자에 AddressFamily를 함께 지정하는데요,

// IPv4
Socket sock = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);

// IPv6
Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);

(.NET 4.5부터 지원하는) 저걸 생략한 소켓 생성자의 경우,

public Socket(SocketType socketType, ProtocolType protocolType)
    : this(OSSupportsIPv6 ? AddressFamily.InterNetworkV6 : AddressFamily.InterNetwork, socketType, protocolType)
{
    if (OSSupportsIPv6)
    {
        DualMode = true;
    }
}

보는 바와 같이 운영체제가 IPv6를 지원하는 경우라면 기본적으로 InterNetworkV6로 초기화가 됩니다. 그러면서 동시에 (.NET 4.5부터 지원하는) DualMode 속성이 true로 바뀌는데요,

// NOTE: on *nix, the OS IP stack changes a dual-mode socket back to a
//       normal IPv6 socket once the socket is bound to an IPv6-specific
//       address. This can cause behavioral differences in code that checks
//       the value of DualMode (e.g. the checks in CanTryAddressFamily).
public bool DualMode
{
    get
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            return false;
        }
        return ((int)GetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only)! == 0);
    }
    set
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            throw new NotSupportedException(SR.net_invalidversion);
        }
        SetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only, value ? 0 : 1);
    }
}

즉, SocketOptionName.IPv6Only 옵션을 끄는 역할을 합니다. only 옵션을 껐다는 것은 IPv6/IPv4 듀얼 모드로 동작한다는 것을 의미합니다. 간단하죠? ^^ 따라서 위와 같이 소켓을 생성하는 것은 다음과 같이 바꿔서 표현할 수도 있습니다.

using (Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp))
{
    // Dual Mode Sockets – Never create an IPv4 Socket again
    // https://devblogs.microsoft.com/dotnet/dual-mode-sockets-never-create-an-ipv4-socket-again/
    sock.DualMode = true;
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

기왕이면 코드가 단순한 것이 좋으니 첫 번째 유형으로 쓰고, 단지 그것이 어떤 의미인지만 이 글을 통해 알아두시면 되겠습니다. ^^

참고로, DualMode는 Vista 이후의 운영체제에서만 지원됩니다. 만약 Vista 미만의 운영체제를 지원해야 한다면 IPv4, IPv6 소켓을 각각 생성해 바인딩시켜야 합니다.




IPv6 소켓을 사용하면서 주소는 IPv4를 지정하면,

Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
sock.Bind(new IPEndPoint(IPAddress.Any, 18000));

이런 오류가 발생합니다.

Unhandled exception. System.Net.Sockets.SocketException (10014): The system detected an invalid pointer address in attempting to use a pointer argument in a call.
   at System.Net.Sockets.Socket.UpdateStatusAfterSocketErrorAndThrowException(SocketError error, String callerName)
   at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Bind(EndPoint localEP)
   ...[생략]...




DualMode 속성을 지원하지 않는 .NET 4.5 미만에서는 이렇게!

Tired of creating sockets for each protocol, to make your application listen on all addresses for a given port?
; https://web.archive.org/web/20130909044601/http://blogs.msdn.com/b/malarch/archive/2005/11/18/494769.aspx

There is no more pain. Here is a cool new feature supported in Vista and Windows Server Longhorn. By just setting a socketoption, you will be able to use the same socket to accept connections from both ipv4 and ipv6 clients.

The following sample code shows how to configure the server socket.

static void Main(string[] args)
{
    Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
    sock.SetSocketOption(SocketOptionLevel.IPv6, (SocketOptionName)27, 0);
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 8000));
    sock.Listen(4);
    Socket client = sock.Accept();
    Console.WriteLine("Client has connected successfully with the server");
}

Create an IPv6 socket. Set the socket option IPV6_V6Only to false (by default it is true), to enable the socket to accept connections from ipv4 addresses too. Bind and Listen as usual. Now both ipv4 and ipv6 clients can connect to it
More info can be found in http://www.ietf.org/rfc/rfc3493.txt.

This is because Vista has a completely redesigned TCP/IP stack.

Whereas Windows XP and Win2k3 have a dual stack architecture, i.e., the Tcp, Udp layer is separate for both ipv4 and ipv6 protocols, Vista supports the dual IP layer architecture. That is, Only a single Tcp, Udp layer is present for both the ipv4 and ipv6 protocols.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 11/16/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 



2025-07-11 04시09분
eBPF Mystery: When is IPv4 not IPv4? When it's pretending to be IPv6!
; https://blog.gripdev.xyz/2025/05/06/ebpf-mystery-when-is-ipv4-not-ipv4-when-its-ipv6/

위의 글에서 .NET 5+의 IPv6/IPv4 Dual Mode에 대한 재미있는 시행 착오가 나옵니다.

즉, IPv6 지원을 끈 컴퓨터에서조차도 .NET 5+ 응용 프로그램의 Socket은 기본적으로 IPv6로 소켓을 다루고 있었고, 그것이 가능한 이유가 바로 Dual mode로 설정된 소켓이었기 때문이라고 합니다.

개인적으로는 Dual Mode라는 것이 내부적으로 IPv6 또는 IPv4 소켓으로 자동 생성되는 유형이라고 생각했는데, 그보다는 소켓 자원 자체는 IPv6로 고정인 상태에서 IPv4 통신을 지원하는 유형이었던 것입니다. (참고: RFC1933 - "https://datatracker.ietf.org/doc/html/rfc1933")
정성태

... 61  62  63  64  65  66  67  68  69  [70]  71  72  73  74  75  ...
NoWriterDateCnt.TitleFile(s)
12278정성태7/23/202019727VS.NET IDE: 149. ("Binary was not built with debug information" 상태로) 소스 코드 디버깅이 안되는 경우
12277정성태7/23/202022373개발 환경 구성: 498. DEVPATH 환경 변수의 사용 예 - .NET Reflector의 (PDB 연결이 없는) DLL의 소스 코드 디버깅
12276정성태7/23/202022153.NET Framework: 930. 개발자를 위한 닷넷 어셈블리 바인딩 - DEVPATH 환경 변수
12275정성태7/22/202023798개발 환경 구성: 497. 닷넷에서 접근해보는 InterSystems의 IRIS Data Platform 데이터베이스파일 다운로드1
12274정성태7/21/202022124개발 환경 구성: 496. Azure - Blob Storage Account의 Location 이전 방법 [1]파일 다운로드1
12273정성태7/18/202026089개발 환경 구성: 495. Azure - Location이 다른 웹/DB 서버의 경우 발생하는 성능 하락
12272정성태7/16/202017772.NET Framework: 929. (StrongName의 버전 구분이 필요 없는) .NET Core 어셈블리 바인딩 규칙 [2]파일 다운로드1
12271정성태7/16/202022109.NET Framework: 928. .NET Framework의 Strong-named 어셈블리 바인딩 (2) - 런타임에 바인딩 리디렉션파일 다운로드1
12270정성태7/16/202022942오류 유형: 633. SSL_CTX_use_certificate_file - error:140AB18F:SSL routines:SSL_CTX_use_certificate:ee key too small
12269정성태7/16/202020327오류 유형: 632. .NET Core 웹 응용 프로그램 - The process was terminated due to an unhandled exception.
12268정성태7/15/202023442오류 유형: 631. .NET Core 웹 응용 프로그램 오류 - HTTP Error 500.35 - ANCM Multiple In-Process Applications in same Process
12267정성태7/15/202025879.NET Framework: 927. C# - 윈도우 프로그램에서 Credential Manager를 이용한 보안 정보 저장파일 다운로드1
12266정성태7/14/202021976오류 유형: 630. 사용자 계정을 지정해 CreateService API로 서비스를 등록한 경우 "Error 1069: The service did not start due to a logon failure." 오류발생
12265정성태7/10/202020912오류 유형: 629. Visual Studio - 웹 애플리케이션 실행 시 "Unable to connect to web server 'IIS Express'." 오류 발생
12264정성태7/9/202032996오류 유형: 628. docker: Error response from daemon: Conflict. The container name "..." is already in use by container "...".
12261정성태7/9/202023370VS.NET IDE: 148. 윈도우 10에서 .NET Core 응용 프로그램을 리눅스 환경에서 실행하는 2가지 방법 - docker, WSL 2 [5]
12260정성태7/8/202021238.NET Framework: 926. C# - ETW를 이용한 ThreadPool 스레드 감시파일 다운로드1
12259정성태7/8/202019747오류 유형: 627. nvlddmkm.sys의 BAD_POOL_HEADER BSOD 문제 [1]
12258정성태7/8/202023489기타: 77. DataDog APM 간략 소개
12257정성태7/7/202019647.NET Framework: 925. C# - ETW를 이용한 Monitor Enter/Exit 감시파일 다운로드1
12256정성태7/7/202022226.NET Framework: 924. C# - Reflection으로 변경할 수 없는 readonly 정적 필드 [4]
12255정성태7/6/202023042.NET Framework: 923. C# - ETW(Event Tracing for Windows)를 이용한 Finalizer 실행 감시파일 다운로드1
12254정성태7/2/202019751오류 유형: 626. git - REMOTE HOST IDENTIFICATION HAS CHANGED!
12253정성태7/2/202023652.NET Framework: 922. C# - .NET ThreadPool의 Local/Global Queue파일 다운로드1
12252정성태7/2/202025087.NET Framework: 921. C# - I/O 스레드를 사용한 비동기 소켓 서버/클라이언트파일 다운로드2
12251정성태7/1/202025016.NET Framework: 920. C# - 파일의 비동기 처리 유무에 따른 스레드 상황 [1]파일 다운로드2
... 61  62  63  64  65  66  67  68  69  [70]  71  72  73  74  75  ...