Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

WSL - systemd-genie와 관련한 2가지(systemd-remount-fs.service, multipathd.socket) 에러

WSL에 systemd-genie를 설치 후 시작하면 대개의 경우 저처럼 (2022-07-22 기준) 2가지 오류가 발생합니다.

c:\temp> wsl genie -s
genie: WARNING: systemd default target is default.target; targets other than multi-user.target may not work
genie: WARNING: if you wish to use a different target, this warning can be disabled in the config file
genie: WARNING: if you experience problems, please change the target to multi-user.target
Waiting for systemd....!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
genie: systemd did not enter running state (degraded) after 240 seconds
genie: this may be due to a problem with your systemd configuration
genie: information on problematic units is available at https://github.com/arkane-systems/genie/wiki/Systemd-units-known-to-be-problematic-under-WSL
genie: a list of failed units follows:

  UNIT                       LOAD   ACTIVE SUB    DESCRIPTION
● systemd-remount-fs.service loaded failed failed Remount Root and Kernel File Systems
● multipathd.socket          loaded failed failed multipathd control socket

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

2 loaded units listed.
genie: WARNING: systemd is in degraded state, issues may occur!

$

위의 경우 systemd-remount-fs.service, multipathd.socket 2가지 구성 요소를 시작할 때 오류가 발생하고 있는데요, 하나씩 수정해 볼까요? ^^

우선 systemd-remount-fs.service에서 발생한 오류 먼저 해결해 보겠습니다. 보다 자세한 메시지는 systemctl status 명령어로 확인할 수 있는데,

$ sudo systemctl status systemd-remount-fs.service
● systemd-remount-fs.service - Remount Root and Kernel File Systems
     Loaded: loaded (/lib/systemd/system/systemd-remount-fs.service; enabled-runtime; vendor preset: enabled)
     Active: failed (Result: exit-code) since Wed 2022-07-20 16:29:33 KST; 10min ago
       Docs: man:systemd-remount-fs.service(8)
             https://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
    Process: 57 ExecStart=/lib/systemd/systemd-remount-fs (code=exited, status=1/FAILURE)
   Main PID: 57 (code=exited, status=1/FAILURE)

Jul 20 16:29:33 TESTPC-wsl systemd-remount-fs[62]: mount: /: can't find LABEL=cloudimg-rootfs.
Warning: journal has been rotated since unit was started, output may be incomplete.

보다시피 "mount: /: can't find LABEL=cloudimg-rootfs."라는 오류 메시지가 나오는데요, 이에 대해서는 문서에 자세하게 설명하고 있습니다.

systemd-remount-fs.service
; https://github.com/arkane-systems/genie/wiki/Systemd-units-known-to-be-problematic-under-WSL#systemd-remount-fsservice

그러니까, systemd-remount-fs 서비스는 루트 파티션을 다시 마운트하려고 하는데 이때 /etc/fstab 파일에 설정된 라벨 이름으로 시도한다고 합니다. 문제는, Ubuntu의 기본 라벨값은 cloudimg-rootfs이고,

$ cat /etc/fstab
LABEL=cloudimg-rootfs   /        ext4   defaults        0 1

WSL의 경우에는 다르다고 합니다. 이것을 맞춰 주기 위해 WSL 루트 파티션을 다음과 같이 cloudimg-rootfs 이름으로 지정하라고 합니다.

$ sudo e2label /dev/sdd cloudimg-rootfs

위에서 "/dev/sdd"는 df를 이용해 구할 수 있습니다.

$ df
Filesystem      1K-blocks      Used  Available Use% Mounted on
/dev/sdd        263174212   3929640  245806416   2% /
tools           894567636 306444732  588122904  35% /init
...[생략]...
/dev/loop1          71680     71680          0 100% /snap/lxd/19188

위와 같은 경우 "/dev/sdd"가 "/" 루트에 매핑이 되고 있으므로 그 이름을 e2label 명령어에 전달하면 됩니다.

그런데, 개인적으로 이게 좀 이해가 안 됩니다. /etc/fstab 파일을 보면 "cloudimg-rootfs"가 "/" 루트로 매핑되어 있는데, 왜 그게 /dev/sdd로 다시 설정해야 한다는 것인지... ^^;




자, 어쨌든 그렇게 해서 문제 한 가지를 해결했고, multipathd.socket으로 넘어가 보겠습니다.

$ sudo systemctl status multipathd.socket
● multipathd.socket - multipathd control socket
     Loaded: loaded (/lib/systemd/system/multipathd.socket; enabled; vendor preset: enabled)
     Active: failed (Result: trigger-limit-hit) since Wed 2022-07-20 16:50:24 KST; 16h ago
   Triggers: ● multipathd.service
     Listen: @/org/kernel/linux/storage/multipathd (Stream)

Jul 20 16:50:24 TESTPC-wsl systemd[1]: multipathd.socket: Trigger limit hit, refusing further activation.
Jul 20 16:50:24 TESTPC-wsl systemd[1]: multipathd.socket: Failed with result 'trigger-limit-hit'.
Warning: journal has been rotated since unit was started, output may be incomplete.

딱히 이번에는 도움이 될만한 오류가 없는데요, 그래도 문서를 보면,

multipathd.service
; https://github.com/arkane-systems/genie/wiki/Systemd-units-known-to-be-problematic-under-WSL#multipathdservice

원래 WSL의 기본 커널에는 multipath 지원이 없다고 합니다. 따라서 이것을 해결하려면 별도의 커널 컴파일을 해야 하는데... 음... 귀찮으니 그냥 disable 시키겠습니다.

$ sudo systemctl disable multipathd.socket




자, 이렇게 2개의 문제를 해결하고 다시 "wsl genie -s" 명령을 내리면 이번에는 깔끔하게 시작하는 것을 볼 수 있습니다. ^^

C:\Windows\System32> wsl genie -s
Waiting for systemd....!!!!!!!!!!!

$ pstree
systemd─┬─ModemManager───2*[{ModemManager}]
        ├─NetworkManager───2*[{NetworkManager}]
        ├─accounts-daemon───2*[{accounts-daemon}]
        ├─agetty
        ├─atd
        ├─avahi-daemon───avahi-daemon
        ├─bash─┬─(sd-pam)
        │      └─pstree
        ├─cron
        ├─dbus-daemon
        ├─gdm3───3*[{gdm3}]
        ├─networkd-dispat
        ├─polkitd───2*[{polkitd}]
        ├─rsyslogd───3*[{rsyslogd}]
        ├─rtkit-daemon───2*[{rtkit-daemon}]
        ├─snapd───25*[{snapd}]
        ├─4*[snapfuse]
        ├─sshd
        ├─switcheroo-cont───2*[{switcheroo-cont}]
        ├─systemd─┬─(sd-pam)
        │         └─dbus-daemon
        ├─systemd─┬─(sd-pam)
        │         ├─dbus-daemon
        │         └─pulseaudio───2*[{pulseaudio}]
        ├─systemd-hostnam
        ├─systemd-journal
        ├─systemd-logind
        ├─systemd-machine
        ├─systemd-network
        ├─systemd-resolve
        ├─systemd-timedat
        ├─systemd-udevd───48*[systemd-udevd]
        ├─udisksd───4*[{udisksd}]
        ├─unattended-upgr───{unattended-upgr}
        └─wpa_supplicant




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 7/22/2022]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 106  107  108  109  110  111  112  113  114  [115]  116  117  118  119  120  ...
NoWriterDateCnt.TitleFile(s)
11139정성태1/22/201726651.NET Framework: 637. C# 개발자를 위한 Win32 DLL export 함수의 호출 규약 (3) - x64 환경의 __fastcall과 Name mangling [1]파일 다운로드1
11138정성태1/20/201725265VS.NET IDE: 113. 프로젝트 생성 시부터 "Enable the Visual Studio hosting process" 옵션을 끄는 방법 - 두 번째 이야기 [3]
11137정성태1/20/201722401Windows: 135. AD에 참여한 컴퓨터로 RDP 연결 시 배경 화면을 못 바꾸는 정책
11136정성태1/20/201722619오류 유형: 375. Hyper-V 내에 구성한 Active Directory 환경의 시간 구성 방법 - 두 번째 이야기
11135정성태1/20/201723155Windows: 134. Windows Server 2016의 작업 표시줄에 있는 시계가 사라졌다면? [1]
11134정성태1/20/201731590.NET Framework: 636. System.Threading.Timer를 이용해 타이머 작업을 할 때 유의할 점 [5]파일 다운로드1
11133정성태1/20/201727453.NET Framework: 635. C# 개발자를 위한 Win32 DLL export 함수의 호출 규약 (2) - x86 환경의 __fastcall [1]파일 다운로드1
11132정성태1/19/201739563.NET Framework: 634. C# 개발자를 위한 Win32 DLL export 함수의 호출 규약 (1) - x86 환경에서의 __cdecl, __stdcall에 대한 Name mangling [1]파일 다운로드1
11131정성태1/13/201728096.NET Framework: 633. C# - IL 코드 분석을 위한 팁 [2]
11130정성태1/11/201729054.NET Framework: 632. x86 실행 환경에서 SECURITY_ATTRIBUTES 구조체를 CreateEvent에 전달할 때 예외 발생파일 다운로드1
11129정성태1/11/201732901.NET Framework: 631. async/await에 대한 "There Is No Thread" 글의 부가 설명 [9]파일 다운로드1
11128정성태1/9/201725651.NET Framework: 630. C# - Interlocked.CompareExchange 사용 예제 [3]파일 다운로드1
11127정성태1/8/201727562기타: 63. (개발자를 위한) Visual Studio의 "with MSDN" 라이선스 설명
11126정성태1/7/201732439기타: 62. Edge 웹 브라우저의 즐겨찾기(Favorites)를 편집/백업/복원하는 방법 [1]파일 다운로드1
11125정성태1/7/201729110개발 환경 구성: 310. IIS - appcmd.exe를 이용해 특정 페이지에 클라이언트 측 인증서를 제출하도록 설정하는 방법
11124정성태1/4/201732389개발 환경 구성: 309. 3년짜리 유효 기간을 제공하는 StartSSL [2]
11123정성태1/3/201727811.NET Framework: 629. .NET Core의 dotnet.exe CLI 명령어 확장 방법 [1]
11122정성태1/3/201725425.NET Framework: 628. TransactionScope에 사용자 정의 트랜잭션을 참여시키는 방법 [2]파일 다운로드1
11121정성태1/1/201723227개발 환경 구성: 308. "ASP.NET Core Web Application (.NET Core)"와 "ASP.NET Core Web Application (.NET Framework)" 차이점
11120정성태12/25/201631352개발 환경 구성: 307. ASP.NET Core Web Application을 IIS에서 호스팅하는 방법
11119정성태12/23/201651520개발 환경 구성: 306. Visual Studio Code에서 Python 개발 환경 구성 [2]
11118정성태12/22/201641427오류 유형: 374. Python 64비트 설치 시 0x80070659 오류 발생 [3]
11117정성태12/21/201626432웹: 35. nopCommerce 예제 사이트 구성 방법
11116정성태12/21/201628731디버깅 기술: 84. NopCommerce의 Autofac 부하(CPU, Memory) [2]
11115정성태12/21/201631628Windows: 133. 윈도우 서버 2016에서 플래시가 동작하지 않는 경우 [2]
11114정성태12/19/201644061Windows: 132. 역슬래시(backslash) 문자가 왜 통화 표기 문자(한글인 경우 "\")로 보일까요? [2]
... 106  107  108  109  110  111  112  113  114  [115]  116  117  118  119  120  ...