Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

WSL - systemd-genie와 관련한 2가지(systemd-remount-fs.service, multipathd.socket) 에러

WSL에 systemd-genie를 설치 후 시작하면 대개의 경우 저처럼 (2022-07-22 기준) 2가지 오류가 발생합니다.

c:\temp> wsl genie -s
genie: WARNING: systemd default target is default.target; targets other than multi-user.target may not work
genie: WARNING: if you wish to use a different target, this warning can be disabled in the config file
genie: WARNING: if you experience problems, please change the target to multi-user.target
Waiting for systemd....!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
genie: systemd did not enter running state (degraded) after 240 seconds
genie: this may be due to a problem with your systemd configuration
genie: information on problematic units is available at https://github.com/arkane-systems/genie/wiki/Systemd-units-known-to-be-problematic-under-WSL
genie: a list of failed units follows:

  UNIT                       LOAD   ACTIVE SUB    DESCRIPTION
● systemd-remount-fs.service loaded failed failed Remount Root and Kernel File Systems
● multipathd.socket          loaded failed failed multipathd control socket

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

2 loaded units listed.
genie: WARNING: systemd is in degraded state, issues may occur!

$

위의 경우 systemd-remount-fs.service, multipathd.socket 2가지 구성 요소를 시작할 때 오류가 발생하고 있는데요, 하나씩 수정해 볼까요? ^^

우선 systemd-remount-fs.service에서 발생한 오류 먼저 해결해 보겠습니다. 보다 자세한 메시지는 systemctl status 명령어로 확인할 수 있는데,

$ sudo systemctl status systemd-remount-fs.service
● systemd-remount-fs.service - Remount Root and Kernel File Systems
     Loaded: loaded (/lib/systemd/system/systemd-remount-fs.service; enabled-runtime; vendor preset: enabled)
     Active: failed (Result: exit-code) since Wed 2022-07-20 16:29:33 KST; 10min ago
       Docs: man:systemd-remount-fs.service(8)
             https://www.freedesktop.org/wiki/Software/systemd/APIFileSystems
    Process: 57 ExecStart=/lib/systemd/systemd-remount-fs (code=exited, status=1/FAILURE)
   Main PID: 57 (code=exited, status=1/FAILURE)

Jul 20 16:29:33 TESTPC-wsl systemd-remount-fs[62]: mount: /: can't find LABEL=cloudimg-rootfs.
Warning: journal has been rotated since unit was started, output may be incomplete.

보다시피 "mount: /: can't find LABEL=cloudimg-rootfs."라는 오류 메시지가 나오는데요, 이에 대해서는 문서에 자세하게 설명하고 있습니다.

systemd-remount-fs.service
; https://github.com/arkane-systems/genie/wiki/Systemd-units-known-to-be-problematic-under-WSL#systemd-remount-fsservice

그러니까, systemd-remount-fs 서비스는 루트 파티션을 다시 마운트하려고 하는데 이때 /etc/fstab 파일에 설정된 라벨 이름으로 시도한다고 합니다. 문제는, Ubuntu의 기본 라벨값은 cloudimg-rootfs이고,

$ cat /etc/fstab
LABEL=cloudimg-rootfs   /        ext4   defaults        0 1

WSL의 경우에는 다르다고 합니다. 이것을 맞춰 주기 위해 WSL 루트 파티션을 다음과 같이 cloudimg-rootfs 이름으로 지정하라고 합니다.

$ sudo e2label /dev/sdd cloudimg-rootfs

위에서 "/dev/sdd"는 df를 이용해 구할 수 있습니다.

$ df
Filesystem      1K-blocks      Used  Available Use% Mounted on
/dev/sdd        263174212   3929640  245806416   2% /
tools           894567636 306444732  588122904  35% /init
...[생략]...
/dev/loop1          71680     71680          0 100% /snap/lxd/19188

위와 같은 경우 "/dev/sdd"가 "/" 루트에 매핑이 되고 있으므로 그 이름을 e2label 명령어에 전달하면 됩니다.

그런데, 개인적으로 이게 좀 이해가 안 됩니다. /etc/fstab 파일을 보면 "cloudimg-rootfs"가 "/" 루트로 매핑되어 있는데, 왜 그게 /dev/sdd로 다시 설정해야 한다는 것인지... ^^;




자, 어쨌든 그렇게 해서 문제 한 가지를 해결했고, multipathd.socket으로 넘어가 보겠습니다.

$ sudo systemctl status multipathd.socket
● multipathd.socket - multipathd control socket
     Loaded: loaded (/lib/systemd/system/multipathd.socket; enabled; vendor preset: enabled)
     Active: failed (Result: trigger-limit-hit) since Wed 2022-07-20 16:50:24 KST; 16h ago
   Triggers: ● multipathd.service
     Listen: @/org/kernel/linux/storage/multipathd (Stream)

Jul 20 16:50:24 TESTPC-wsl systemd[1]: multipathd.socket: Trigger limit hit, refusing further activation.
Jul 20 16:50:24 TESTPC-wsl systemd[1]: multipathd.socket: Failed with result 'trigger-limit-hit'.
Warning: journal has been rotated since unit was started, output may be incomplete.

딱히 이번에는 도움이 될만한 오류가 없는데요, 그래도 문서를 보면,

multipathd.service
; https://github.com/arkane-systems/genie/wiki/Systemd-units-known-to-be-problematic-under-WSL#multipathdservice

원래 WSL의 기본 커널에는 multipath 지원이 없다고 합니다. 따라서 이것을 해결하려면 별도의 커널 컴파일을 해야 하는데... 음... 귀찮으니 그냥 disable 시키겠습니다.

$ sudo systemctl disable multipathd.socket




자, 이렇게 2개의 문제를 해결하고 다시 "wsl genie -s" 명령을 내리면 이번에는 깔끔하게 시작하는 것을 볼 수 있습니다. ^^

C:\Windows\System32> wsl genie -s
Waiting for systemd....!!!!!!!!!!!

$ pstree
systemd─┬─ModemManager───2*[{ModemManager}]
        ├─NetworkManager───2*[{NetworkManager}]
        ├─accounts-daemon───2*[{accounts-daemon}]
        ├─agetty
        ├─atd
        ├─avahi-daemon───avahi-daemon
        ├─bash─┬─(sd-pam)
        │      └─pstree
        ├─cron
        ├─dbus-daemon
        ├─gdm3───3*[{gdm3}]
        ├─networkd-dispat
        ├─polkitd───2*[{polkitd}]
        ├─rsyslogd───3*[{rsyslogd}]
        ├─rtkit-daemon───2*[{rtkit-daemon}]
        ├─snapd───25*[{snapd}]
        ├─4*[snapfuse]
        ├─sshd
        ├─switcheroo-cont───2*[{switcheroo-cont}]
        ├─systemd─┬─(sd-pam)
        │         └─dbus-daemon
        ├─systemd─┬─(sd-pam)
        │         ├─dbus-daemon
        │         └─pulseaudio───2*[{pulseaudio}]
        ├─systemd-hostnam
        ├─systemd-journal
        ├─systemd-logind
        ├─systemd-machine
        ├─systemd-network
        ├─systemd-resolve
        ├─systemd-timedat
        ├─systemd-udevd───48*[systemd-udevd]
        ├─udisksd───4*[{udisksd}]
        ├─unattended-upgr───{unattended-upgr}
        └─wpa_supplicant




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 7/22/2022]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 61  62  63  64  65  66  67  68  [69]  70  71  72  73  74  75  ...
NoWriterDateCnt.TitleFile(s)
12253정성태7/2/202021560.NET Framework: 922. C# - .NET ThreadPool의 Local/Global Queue파일 다운로드1
12252정성태7/2/202022972.NET Framework: 921. C# - I/O 스레드를 사용한 비동기 소켓 서버/클라이언트파일 다운로드2
12251정성태7/1/202022702.NET Framework: 920. C# - 파일의 비동기 처리 유무에 따른 스레드 상황 [1]파일 다운로드2
12250정성태6/30/202023698.NET Framework: 919. C# - 닷넷에서의 진정한 비동기 호출을 가능케 하는 I/O 스레드 사용법 [1]파일 다운로드1
12249정성태6/29/202019881오류 유형: 625. Microsoft SQL Server 2019 RC1 Setup - 설치 제거 시 Warning 26003 오류 발생
12248정성태6/29/202017550오류 유형: 624. SQL 서버 오류 - service-specific error code 17051
12247정성태6/29/202019574.NET Framework: 918. C# - 불린 형 상수를 반환값으로 포함하는 3항 연산자 사용 시 단축 표현 권장(IDE0075) [2]파일 다운로드1
12246정성태6/29/202020883.NET Framework: 917. C# - USB 관련 ETW(Event Tracing for Windows)를 이용한 키보드 입력을 감지하는 방법
12245정성태6/24/202021369.NET Framework: 916. C# - Task.Yield 사용법 (2) [2]파일 다운로드1
12244정성태6/24/202021393.NET Framework: 915. ETW(Event Tracing for Windows)를 이용한 닷넷 프로그램의 내부 이벤트 활용 [1]파일 다운로드1
12243정성태6/23/202017624VS.NET IDE: 147. Visual C++ 프로젝트 - .NET Core EXE를 "Debugger Type"으로 지원하는 기능 추가
12242정성태6/23/202019331오류 유형: 623. AADSTS90072 - User account '...' from identity provider 'live.com' does not exist in tenant 'Microsoft Services'
12241정성태6/23/202021708.NET Framework: 914. C# - Task.Yield 사용법파일 다운로드1
12240정성태6/23/202022973오류 유형: 622. 소켓 바인딩 시 "System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions" 오류 발생
12239정성태6/21/202022233Linux: 30. (윈도우라면 DLL에 속하는) .so 파일이 텍스트로 구성된 사례 [1]
12238정성태6/21/202019958.NET Framework: 913. C# - SharpDX + DXGI를 이용한 윈도우 화면 캡처 라이브러리
12237정성태6/20/202019802.NET Framework: 912. 리눅스 환경의 .NET Core에서 "test".IndexOf("\0")가 0을 반환
12236정성태6/19/202020842오류 유형: 621. .NET Standard 대상으로 빌드 시 dynamic 예약어에서 컴파일 오류 - error CS0656: Missing compiler required member 'Microsoft.CSharp.RuntimeBinder.CSharpArgumentInfo.Create'
12235정성태6/19/202018634오류 유형: 620. Windows 10 - Inaccessible boot device 블루 스크린
12234정성태6/19/202018335개발 환경 구성: 494. NuGet - nuspec의 패키지 스키마 버전(네임스페이스) 업데이트 방법
12233정성태6/19/202019732오류 유형: 619. SQL 서버 - The transaction log for database '...' is full due to 'LOG_BACKUP'. - 두 번째 이야기
12232정성태6/19/202017897오류 유형: 618. SharePoint - StoreBusyRetryLater 오류
12231정성태6/15/202021614.NET Framework: 911. Console/Service Application을 위한 SynchronizationContext - AsyncContext
12230정성태6/15/202020233오류 유형: 617. IMetaDataImport::GetMethodProps가 반환하는 IL 코드 주소(RVA) 문제
12229정성태6/13/202022589.NET Framework: 910. USB/IP PROJECT를 이용해 C#으로 USB Keyboard + Mouse 가상 장치 만들기 [1]
12228정성태6/12/202020737.NET Framework: 909. C# - Source Generator를 적용한 XmlCodeGenerator파일 다운로드1
... 61  62  63  64  65  66  67  68  [69]  70  71  72  73  74  75  ...