Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 136  137  138  139  140  141  142  143  144  145  146  147  148  149  [150]  ...
NoWriterDateCnt.TitleFile(s)
1303정성태6/26/201227387개발 환경 구성: 152. sysnet DB를 SQL Azure 데이터베이스로 마이그레이션
1302정성태6/25/201229359개발 환경 구성: 151. Azure 웹 사이트에 사용자 도메인 네임 연결하는 방법
1301정성태6/20/201225758오류 유형: 156. KB2667402 윈도우 업데이트 실패 및 마이크로소프트 Answers 웹 사이트 대응
1300정성태6/20/201231745.NET Framework: 329. C# - Rabin-Miller 소수 생성방법을 이용하여 RSACryptoServiceProvider의 개인키를 직접 채워보자 [1]파일 다운로드2
1299정성태6/18/201232862제니퍼 .NET: 21. 제니퍼 닷넷 - Ninject DI 프레임워크의 성능 분석 [2]파일 다운로드2
1298정성태6/14/201234394VS.NET IDE: 72. Visual Studio에서 pfx 파일로 서명한 경우, 암호는 어디에 저장될까? [2]
1297정성태6/12/201231036VC++: 63. 다른 프로세스에 환경 변수 설정하는 방법파일 다운로드1
1296정성태6/5/201227667.NET Framework: 328. 해당 DLL이 Managed인지 / Unmanaged인지 확인하는 방법 - 두 번째 이야기 [4]파일 다운로드1
1295정성태6/5/201225072.NET Framework: 327. RSAParameters와 System.Numerics.BigInteger 이야기파일 다운로드1
1294정성태5/27/201248508.NET Framework: 326. 유니코드와 한글 - 유니코드와 닷넷을 이용한 한글 처리 [7]파일 다운로드2
1293정성태5/24/201229769.NET Framework: 325. System.Drawing.Bitmap 데이터를 Parallel.For로 처리하는 방법 [2]파일 다운로드1
1292정성태5/24/201223747.NET Framework: 324. First-chance exception에 대해 조건에 따라 디버거가 멈추게 할 수는 없을까? [1]파일 다운로드1
1291정성태5/23/201230262VC++: 62. 배열 초기화를 위한 기계어 코드 확인 [2]
1290정성태5/18/201235073.NET Framework: 323. 관리자 권한이 필요한 작업을 COM+에 대행 [7]파일 다운로드1
1289정성태5/17/201239229.NET Framework: 322. regsvcs.exe로 어셈블리 등록 시 시스템 변경 사항 [5]파일 다운로드2
1288정성태5/17/201226454.NET Framework: 321. regasm.exe로 어셈블리 등록 시 시스템 변경 사항 (3) - Type Library파일 다운로드1
1287정성태5/17/201229280.NET Framework: 320. regasm.exe로 어셈블리 등록 시 시스템 변경 사항 (2) - .NET 4.0 + .NET 2.0 [2]
1286정성태5/17/201238201.NET Framework: 319. regasm.exe로 어셈블리 등록 시 시스템 변경 사항 (1) - .NET 2.0 + x86/x64/AnyCPU [5]
1285정성태5/16/201233256.NET Framework: 318. gacutil.exe로 어셈블리 등록 시 시스템 변경 사항파일 다운로드1
1284정성태5/15/201225684오류 유형: 155. Windows Phone 연결 상태에서 DRIVER POWER STATE FAILURE 블루 스크린 뜨는 현상
1283정성태5/12/201233296.NET Framework: 317. C# 관점에서의 Observer 패턴 구현 [1]파일 다운로드1
1282정성태5/12/201226092Phone: 6. Windows Phone 7 Silverlight에서 Google Map 사용하는 방법 [3]파일 다운로드1
1281정성태5/9/201233176.NET Framework: 316. WPF/Silverlight의 그래픽 단위와 Anti-aliasing 처리를 이해하자 [1]파일 다운로드1
1280정성태5/9/201226149오류 유형: 154. Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, ...'.
1279정성태5/9/201224909.NET Framework: 315. 해당 DLL이 Managed인지 / Unmanaged인지 확인하는 방법 [1]파일 다운로드1
1278정성태5/8/201226138오류 유형: 153. Visual Studio 디버깅 - Unable to break execution. This process is not currently executing the type of code that you selected to debug.
... 136  137  138  139  140  141  142  143  144  145  146  147  148  149  [150]  ...