Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 166  167  168  169  170  171  172  [173]  174  175  176  177  178  179  180  ...
NoWriterDateCnt.TitleFile(s)
713정성태4/30/200957384오류 유형: 79. DLL 'xxxxx.dll'을(를) 로드할 수 없습니다. [1]
712정성태4/28/200929983오류 유형: 78. Windows Vista/2008에서의 MSXML4.cab 파일 배포 문제
711정성태4/27/200929792개발 환경 구성: 43. Hyper-V VHD 파일 크기 확장하는 방법
710정성태4/26/200930192.NET Framework: 133. CallbackOnCollectedDelegate was detected [4]파일 다운로드1
709정성태4/24/200926455개발 환경 구성: 42. Windows Vista SP1에서 사용 가능한 Hyper-V 관리 도구
708정성태4/23/200931375.NET Framework: 132. ClickOnce 배포를 명령행 수작업 구성파일 다운로드1
707정성태4/22/200930816개발 환경 구성: 41. Hyper-V에 Linux 설치 - SUSE Linux Enterprise Server 11
706정성태4/21/200926713.NET Framework: 131. ClickOnce - 그룹화시켜 다운로드파일 다운로드1
705정성태4/20/200922269개발 환경 구성: 40. TFS2008 SP1의 DBTier에 SQL Server 2008 SP1 설치 [1]
704정성태4/19/200922216개발 환경 구성: 39. Together 2007 SP1 설치
702정성태4/18/200933659.NET Framework: 130. Infragistics - Tabbed MDI WPF 응용 프로그램파일 다운로드1
701정성태4/17/200928417Windows: 44. bootsect 오류 - Access is denied.
700정성태4/17/200931515.NET Framework: 129. Infragistics WPF 컨트롤 사용 [1]
699정성태4/16/200929884.NET Framework: 128. 이벤트 멤버의 명시적 구현파일 다운로드1
696정성태4/12/200929210오류 유형: 77. RDP 연결이 되지 않는 경우. [1]
693정성태4/9/200923910오류 유형: 76. "Client found response content type of '', but expected 'text/xml'. The request failed with an empty response.No Reports".
692정성태4/8/200936805.NET Framework: 127. ClickOnce로 ActiveX를 같이 배포하는 방법 [2]파일 다운로드1
690정성태4/5/200924459오류 유형: 75. Event Viewer - The data is invalid (13)
688정성태4/5/200930472VS.NET IDE: 60. Output 경로에 매크로 상수 사용하는 방법 [1]
687정성태4/5/200924591.NET Framework: 126. Composite Application Guidance for WPF and Silverlight
689정성태4/5/200924614    답변글 .NET Framework: 126.1. CAG - 빌드 환경 구성파일 다운로드1
691정성태4/6/200924294    답변글 .NET Framework: 126.2. CAG - Shell 띄우기파일 다운로드1
695정성태4/10/200926082    답변글 .NET Framework: 126.3. CAG - 간단한 유형의 모듈 제작파일 다운로드1
703정성태4/18/200925030        답변글 .NET Framework: 126.6. CAG - Tabbed MDI Shell 적용파일 다운로드1
697정성태4/13/200929309    답변글 .NET Framework: 126.4. CAG - Unity 컨테이너 사용 [1]파일 다운로드1
698정성태4/15/200928512    답변글 .NET Framework: 126.5. CAG에 MVVM 패턴 적용 (1) [2]파일 다운로드1
... 166  167  168  169  170  171  172  [173]  174  175  176  177  178  179  180  ...