Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 16  17  18  19  20  21  22  23  24  25  26  27  [28]  29  30  ...
NoWriterDateCnt.TitleFile(s)
12934정성태1/22/20227372오류 유형: 788. Warning C6262 Function uses '65564' bytes of stack: exceeds /analyze:stacksize '16384'. Consider moving some data to heap. [2]
12933정성태1/21/20227921.NET Framework: 1136. C# - ffmpeg(FFmpeg.AutoGen)를 이용해 MP2 오디오 파일 디코딩 예제(decode_audio.c)파일 다운로드1
12932정성태1/20/20228371.NET Framework: 1135. C# - ffmpeg(FFmpeg.AutoGen)로 하드웨어 가속기를 이용한 비디오 디코딩 예제(hw_decode.c) [2]파일 다운로드1
12931정성태1/20/20226481개발 환경 구성: 632. ASP.NET Core 프로젝트를 AKS/k8s에 올리는 과정
12930정성태1/19/20227141개발 환경 구성: 631. AKS/k8s의 Volume에 파일 복사하는 방법
12929정성태1/19/20226929개발 환경 구성: 630. AKS/k8s의 Pod에 Volume 연결하는 방법
12928정성태1/18/20227065개발 환경 구성: 629. AKS/Kubernetes에서 호스팅 중인 pod에 shell(/bin/bash)로 진입하는 방법
12927정성태1/18/20226839개발 환경 구성: 628. AKS 환경에 응용 프로그램 배포 방법
12926정성태1/17/20227335오류 유형: 787. AKS - pod 배포 시 ErrImagePull/ImagePullBackOff 오류
12925정성태1/17/20227412개발 환경 구성: 627. AKS의 준비 단계 - ACR(Azure Container Registry)에 docker 이미지 배포
12924정성태1/15/20228898.NET Framework: 1134. C# - ffmpeg(FFmpeg.AutoGen)를 이용한 비디오 디코딩 예제(decode_video.c) [2]파일 다운로드1
12923정성태1/15/20227776개발 환경 구성: 626. ffmpeg.exe를 사용해 비디오 파일을 MPEG1 포맷으로 변경하는 방법
12922정성태1/14/20226854개발 환경 구성: 625. AKS - Azure Kubernetes Service 생성 및 SLO/SLA 변경 방법
12921정성태1/14/20225794개발 환경 구성: 624. Docker Desktop에서 별도 서버에 설치한 docker registry에 이미지 올리는 방법
12920정성태1/14/20226548오류 유형: 786. Camtasia - An error occurred with the camera: Failed to Add Video Sampler.
12919정성태1/13/20226379Windows: 199. Host Network Service (HNS)에 의해서 점유되는 포트
12918정성태1/13/20226609Linux: 47. WSL - shell script에서 설정한 환경 변수가 스크립트 실행 후 반영되지 않는 문제
12917정성태1/12/20225818오류 유형: 785. C# - The type or namespace name '...' could not be found (are you missing a using directive or an assembly reference?)
12916정성태1/12/20225580오류 유형: 784. TFS - One or more source control bindings for this solution are not valid and are listed below.
12915정성태1/11/20225865오류 유형: 783. Visual Studio - We didn't find any interpreters
12914정성태1/11/20227852VS.NET IDE: 172. 비주얼 스튜디오 2022의 파이선 개발 환경 지원
12913정성태1/11/20228348.NET Framework: 1133. C# - byte * (바이트 포인터)를 FileStream으로 쓰는 방법 [1]
12912정성태1/11/20228986개발 환경 구성: 623. ffmpeg.exe를 사용해 비디오 파일의 이미지를 PGM(Portable Gray Map) 파일 포맷으로 출력하는 방법 [1]
12911정성태1/11/20226277VS.NET IDE: 171. 비주얼 스튜디오 - 더 이상 만들 수 없는 "ASP.NET Core 3.1 Web Application (.NET Framework)" 프로젝트
12910정성태1/10/20226752제니퍼 .NET: 30. 제니퍼 닷넷 적용 사례 (8) - CPU high와 DB 쿼리 성능에 문제가 함께 있는 사이트
12909정성태1/10/20228150오류 유형: 782. Visual Studio 2022 설치 시 "Couldn't install Microsoft.VisualCpp.Redist.14.Latest"
... 16  17  18  19  20  21  22  23  24  25  26  27  [28]  29  30  ...