Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... [76]  77  78  79  80  81  82  83  84  85  86  87  88  89  90  ...
NoWriterDateCnt.TitleFile(s)
12067정성태11/27/201921059디버깅 기술: 137. 실제 사례를 통해 Debug Diagnostics 도구가 생성한 닷넷 웹 응용 프로그램의 성능 장애 보고서 설명 [1]파일 다운로드1
12066정성태11/27/201920597디버깅 기술: 136. windbg - C# PInvoke 호출 시 마샬링을 담당하는 함수 분석 - OracleCommand.ExecuteReader에서 OpsSql.Prepare2 PInvoke 호출 분석
12065정성태11/25/201918464디버깅 기술: 135. windbg - C# PInvoke 호출 시 마샬링을 담당하는 함수 분석파일 다운로드1
12064정성태11/25/201921914오류 유형: 580. HTTP Error 500.0/500.33 - ANCM In-Process Handler Load Failure
12063정성태11/21/201920851디버깅 기술: 134. windbg - RtlReportCriticalFailure로부터 parameters 정보 찾는 방법
12062정성태11/21/201919958디버깅 기술: 133. windbg - CoTaskMemFree/FreeCoTaskMem에서 발생한 덤프 분석 사례 - 두 번째 이야기
12061정성태11/20/201920136Windows: 167. CoTaskMemAlloc/CoTaskMemFree과 윈도우 Heap의 관계
12060정성태11/20/201922515디버깅 기술: 132. windbg/Visual Studio - HeapFree x64의 동작 분석
12059정성태11/20/201921703디버깅 기술: 131. windbg/Visual Studio - HeapFree x86의 동작 분석
12058정성태11/19/201922310디버깅 기술: 130. windbg - CoTaskMemFree/FreeCoTaskMem에서 발생한 덤프 분석 사례
12057정성태11/18/201917564오류 유형: 579. Visual Studio - Memory 창에서 유효한 주소 영역임에도 "Unable to evaluate the expression." 오류 출력
12056정성태11/18/201923837개발 환경 구성: 464. "Microsoft Visual Studio Installer Projects" 프로젝트로 EXE 서명 및 MSI 파일 서명 방법파일 다운로드1
12055정성태11/17/201917822개발 환경 구성: 463. Visual Studio의 Ctrl + Alt + M, 1 (Memory 1) 등의 단축키가 동작하지 않는 경우
12054정성태11/15/201919494.NET Framework: 869. C# - 일부러 GC Heap을 깨뜨려 GC 수행 시 비정상 종료시키는 예제
12053정성태11/15/201920629Windows: 166. 윈도우 10 - 명령행 창(cmd.exe) 속성에 (DotumChe, GulimChe, GungsuhChe 등의) 한글 폰트가 없는 경우
12052정성태11/15/201919406오류 유형: 578. Azure - 일정(schedule)에 등록한 runbook이 1년 후 실행이 안 되는 문제(Reason - The key used is expired.)
12051정성태11/14/201923691개발 환경 구성: 462. 시작하자마자 비정상 종료하는 프로세스의 메모리 덤프 - procdump [1]
12050정성태11/14/201921117Windows: 165. AcLayers의 API 후킹과 FaultTolerantHeap
12049정성태11/13/201921610.NET Framework: 868. (닷넷 프로세스를 대상으로) 디버거 방식이 아닌 CLR Profiler를 이용해 procdump.exe 기능 구현
12048정성태11/12/201921406Windows: 164. GUID 이름의 볼륨에 해당하는 파티션을 찾는 방법
12047정성태11/12/201923885Windows: 163. 안전하게 eject시킨 USB 장치를 물리적인 재연결 없이 다시 인식시키는 방법
12046정성태10/29/201918034오류 유형: 577. windbg - The call to LoadLibrary(...\sos.dll) failed, Win32 error 0n193
12045정성태10/27/201918444오류 유형: 576. mstest.exe 실행 시 "Visual Studio Enterprise is required to execute the test." 오류 - 두 번째 이야기
12044정성태10/27/201917604오류 유형: 575. mstest.exe - System.Resources.MissingSatelliteAssemblyException: The satellite assembly named "Microsoft.VisualStudio.ProductKeyDialog.resources.dll, ..."
12043정성태10/27/201919604오류 유형: 574. Windows 10 설치 시 오류 - 0xC1900101 - 0x4001E
12042정성태10/26/201918659오류 유형: 573. OneDrive 하위에 위치한 Documents, Desktop 폴더에 대한 권한 변경 시 "Unable to display current owner"
... [76]  77  78  79  80  81  82  83  84  85  86  87  88  89  90  ...