Microsoft MVP성태의 닷넷 이야기
오류 유형: 931. Active Directory의 adprep 또는 복제가 안 되는 경우 [링크 복사], [링크+제목 복사],
조회: 4769
글쓴 사람
정성태 (seongtaejeong at gmail.com)
홈페이지
첨부 파일
 

Active Directory의 adprep 또는 복제가 안 되는 경우

AD 서버를 상위 버전으로의 윈도우 서버로 마이그레이션할 때 이렇게 오류가 발생하거나,

D:\support\adprep> adprep /forestprep

ADPREP WARNING:

Before running adprep, all Windows Active Directory Domain Controllers in the forest must run Windows Server 2003 or later.

You are about to upgrade the schema for the Active Directory forest named 'testad.com', using the Active Directory domain controller (schema master) 'adsvr1.testad.com'.
This operation cannot be reversed after it completes.

[User Action]
If all domain controllers in the forest run Windows Server 2003 or later and you want to upgrade the schema, confirm by typing 'C' and then press ENTER to continue. Otherwise, type any other key and press ENTER to quit.


C

Adprep failed to verify whether schema master has completed a replication cycle after last reboot.
[Status/Consequence]
The schema is not upgraded.
[User Action]
Check the log file ADPrep.log in the C:\WINDOWS\debug\adprep\logs\20241107232351 directory for possible cause of failure.

Adprep encountered an LDAP error.
Error code: 0xc. Server extended error code: 0x20ae, Server error message: 000020AE: SvcErr: DSID-032104F6, problem 5010 (UNAVAIL_EXTENSION), data 8610

AD 데이터를 동기화하는 경우 이런 오류 등이 발생한다면,

Replicate Now

The following error occurred during the attempt to synchronize naming context CN=Configuration,DC=testad,DC=com from Domain Controller ADSVR2 to Domain Controller ADSVR1:
The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.

This operation will not continue.

D:\support\adprep> REPADMIN /SYNCALL
CALLBACK MESSAGE: The following replication is in progress:
    From: d44126fc-e636-4348-be7d-81b0f9394b0a._msdcs.testad.com
    To  : da661036-e628-4525-96d9-00d934eedc67._msdcs.testad.com
CALLBACK MESSAGE: Error issuing replication: 8418 (0x20e2):
    The replication operation failed because of a schema mismatch between the servers involved.
    From: d44126fc-e636-4348-be7d-81b0f9394b0a._msdcs.testad.com
    To  : da661036-e628-4525-96d9-00d934eedc67._msdcs.testad.com
CALLBACK MESSAGE: SyncAll Finished.

SyncAll reported the following errors:
Error issuing replication: 8418 (0x20e2):
    The replication operation failed because of a schema mismatch between the servers involved.
    From: d44126fc-e636-4348-be7d-81b0f9394b0a._msdcs.testad.com
    To  : da661036-e628-4525-96d9-00d934eedc67._msdcs.testad.com

다음의 문서를 참조해 해당 문제를 복구하는 것이 가능할 것입니다.

Error "Target Principal Name is incorrect" when manually replicating data between domain controllers - Resolution
; https://learn.microsoft.com/en-us/troubleshoot/windows-server/active-directory/target-principal-name-is-incorrect-when-replicating-data#resolution

Troubleshoot Active Directory replication error 8614
; https://learn.microsoft.com/en-us/troubleshoot/windows-server/active-directory/replication-error-8614#resolution

혹은 저처럼 ^^ 단순하게, 문제가 된 AD 서버를 DC에서 해제(Demote)하고, 정리한 다음, 다시 AD 서버로 승격(Promote)하는 방법도 있습니다. ^^




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]







[최초 등록일: ]
[최종 수정일: 11/8/2024]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 46  47  48  49  50  51  52  53  54  55  [56]  57  58  59  60  ...
NoWriterDateCnt.TitleFile(s)
12537정성태2/11/202119353.NET Framework: 1022. UI 요소의 접근은 반드시 그 UI를 만든 스레드에서! - 두 번째 이야기 [2]
12536정성태2/9/202118200개발 환경 구성: 542. BDP(Bandwidth-delay product)와 TCP Receive Window
12535정성태2/9/202117271개발 환경 구성: 541. Wireshark로 확인하는 LSO(Large Send Offload), RSC(Receive Segment Coalescing) 옵션
12534정성태2/8/202117788개발 환경 구성: 540. Wireshark + C/C++로 확인하는 TCP 연결에서의 closesocket 동작 [1]파일 다운로드1
12533정성태2/8/202116793개발 환경 구성: 539. Wireshark + C/C++로 확인하는 TCP 연결에서의 shutdown 동작파일 다운로드1
12532정성태2/6/202117990개발 환경 구성: 538. Wireshark + C#으로 확인하는 ReceiveBufferSize(SO_RCVBUF), SendBufferSize(SO_SNDBUF) [3]
12531정성태2/5/202116768개발 환경 구성: 537. Wireshark + C#으로 확인하는 PSH flag와 Nagle 알고리듬파일 다운로드1
12530정성태2/4/202120594개발 환경 구성: 536. Wireshark + C#으로 확인하는 TCP 통신의 Receive Window
12529정성태2/4/202118459개발 환경 구성: 535. Wireshark + C#으로 확인하는 TCP 통신의 MIN RTO [1]
12528정성태2/1/202118050개발 환경 구성: 534. Wireshark + C#으로 확인하는 TCP 통신의 MSS(Maximum Segment Size) - 윈도우 환경
12527정성태2/1/202118138개발 환경 구성: 533. Wireshark + C#으로 확인하는 TCP 통신의 MSS(Maximum Segment Size) - 리눅스 환경파일 다운로드1
12526정성태2/1/202114941개발 환경 구성: 532. Azure Devops의 파이프라인 빌드 시 snk 파일 다루는 방법 - Secure file
12525정성태2/1/202113926개발 환경 구성: 531. Azure Devops - 파이프라인 실행 시 빌드 이벤트를 생략하는 방법
12524정성태1/31/202115113개발 환경 구성: 530. 기존 github 프로젝트를 Azure Devops의 빌드 Pipeline에 연결하는 방법 [1]
12523정성태1/31/202116048개발 환경 구성: 529. 기존 github 프로젝트를 Azure Devops의 Board에 연결하는 방법
12522정성태1/31/202118240개발 환경 구성: 528. 오라클 클라우드의 리눅스 VM - 9000 MTU Jumbo Frame 테스트
12521정성태1/31/202117330개발 환경 구성: 527. 이더넷(Ethernet) 환경의 TCP 통신에서 MSS(Maximum Segment Size) 확인 [1]
12520정성태1/30/202116084개발 환경 구성: 526. 오라클 클라우드의 VM에 ping ICMP 여는 방법
12519정성태1/30/202114814개발 환경 구성: 525. 오라클 클라우드의 VM을 외부에서 접근하기 위해 포트 여는 방법
12518정성태1/30/202132910Linux: 37. Ubuntu에 Wireshark 설치 [2]
12517정성태1/30/202120612Linux: 36. 윈도우 클라이언트에서 X2Go를 이용한 원격 리눅스의 GUI 접속 - 우분투 20.04
12516정성태1/29/202117097Windows: 188. Windows - TCP default template 설정 방법
12515정성태1/28/202118748웹: 41. Microsoft Edge - localhost에 대해 http 접근 시 무조건 https로 바뀌는 문제 [3]
12514정성태1/28/202118883.NET Framework: 1021. C# - 일렉트론 닷넷(Electron.NET) 소개 [1]파일 다운로드1
12513정성태1/28/202116042오류 유형: 698. electronize - User Profile 디렉터리에 공백 문자가 있는 경우 빌드가 실패하는 문제 [1]
12512정성태1/28/202116430오류 유형: 697. The program can't start because VCRUNTIME140.dll is missing from your computer. Try reinstalling the program to fix this problem.
... 46  47  48  49  50  51  52  53  54  55  [56]  57  58  59  60  ...