Microsoft MVP성태의 닷넷 이야기
오류 유형: 931. Active Directory의 adprep 또는 복제가 안 되는 경우 [링크 복사], [링크+제목 복사],
조회: 4845
글쓴 사람
정성태 (seongtaejeong at gmail.com)
홈페이지
첨부 파일
 

Active Directory의 adprep 또는 복제가 안 되는 경우

AD 서버를 상위 버전으로의 윈도우 서버로 마이그레이션할 때 이렇게 오류가 발생하거나,

D:\support\adprep> adprep /forestprep

ADPREP WARNING:

Before running adprep, all Windows Active Directory Domain Controllers in the forest must run Windows Server 2003 or later.

You are about to upgrade the schema for the Active Directory forest named 'testad.com', using the Active Directory domain controller (schema master) 'adsvr1.testad.com'.
This operation cannot be reversed after it completes.

[User Action]
If all domain controllers in the forest run Windows Server 2003 or later and you want to upgrade the schema, confirm by typing 'C' and then press ENTER to continue. Otherwise, type any other key and press ENTER to quit.


C

Adprep failed to verify whether schema master has completed a replication cycle after last reboot.
[Status/Consequence]
The schema is not upgraded.
[User Action]
Check the log file ADPrep.log in the C:\WINDOWS\debug\adprep\logs\20241107232351 directory for possible cause of failure.

Adprep encountered an LDAP error.
Error code: 0xc. Server extended error code: 0x20ae, Server error message: 000020AE: SvcErr: DSID-032104F6, problem 5010 (UNAVAIL_EXTENSION), data 8610

AD 데이터를 동기화하는 경우 이런 오류 등이 발생한다면,

Replicate Now

The following error occurred during the attempt to synchronize naming context CN=Configuration,DC=testad,DC=com from Domain Controller ADSVR2 to Domain Controller ADSVR1:
The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.

This operation will not continue.

D:\support\adprep> REPADMIN /SYNCALL
CALLBACK MESSAGE: The following replication is in progress:
    From: d44126fc-e636-4348-be7d-81b0f9394b0a._msdcs.testad.com
    To  : da661036-e628-4525-96d9-00d934eedc67._msdcs.testad.com
CALLBACK MESSAGE: Error issuing replication: 8418 (0x20e2):
    The replication operation failed because of a schema mismatch between the servers involved.
    From: d44126fc-e636-4348-be7d-81b0f9394b0a._msdcs.testad.com
    To  : da661036-e628-4525-96d9-00d934eedc67._msdcs.testad.com
CALLBACK MESSAGE: SyncAll Finished.

SyncAll reported the following errors:
Error issuing replication: 8418 (0x20e2):
    The replication operation failed because of a schema mismatch between the servers involved.
    From: d44126fc-e636-4348-be7d-81b0f9394b0a._msdcs.testad.com
    To  : da661036-e628-4525-96d9-00d934eedc67._msdcs.testad.com

다음의 문서를 참조해 해당 문제를 복구하는 것이 가능할 것입니다.

Error "Target Principal Name is incorrect" when manually replicating data between domain controllers - Resolution
; https://learn.microsoft.com/en-us/troubleshoot/windows-server/active-directory/target-principal-name-is-incorrect-when-replicating-data#resolution

Troubleshoot Active Directory replication error 8614
; https://learn.microsoft.com/en-us/troubleshoot/windows-server/active-directory/replication-error-8614#resolution

혹은 저처럼 ^^ 단순하게, 문제가 된 AD 서버를 DC에서 해제(Demote)하고, 정리한 다음, 다시 AD 서버로 승격(Promote)하는 방법도 있습니다. ^^




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]







[최초 등록일: ]
[최종 수정일: 11/8/2024]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... [91]  92  93  94  95  96  97  98  99  100  101  102  103  104  105  ...
NoWriterDateCnt.TitleFile(s)
11660정성태8/19/201818666사물인터넷: 33. 세라믹 커패시터의 동작 방식파일 다운로드1
11659정성태8/19/201818603사물인터넷: 32. 9V 전압에서 테스트하는 PN2222A 트랜지스터파일 다운로드1
11658정성태8/18/201822043사물인터넷: 31. 커패시터와 RC 회로파일 다운로드3
11657정성태8/18/201820084사물인터넷: 30. 릴레이(Relay) 제어파일 다운로드3
11656정성태8/16/201815794사물인터넷: 29. 트랜지스터와 병렬로 연결한 LED파일 다운로드1
11655정성태8/16/201818007사물인터넷: 28. 저항과 병렬로 연결한 LED파일 다운로드1
11654정성태8/15/201819324사물인터넷: 27. 병렬 회로의 저항, 전압 및 전류파일 다운로드1
11653정성태8/14/201820163사물인터넷: 26. 입력 전압에 따른 LED의 전압/저항 변화 [1]파일 다운로드1
11652정성태8/14/201817615사물인터넷: 25. 컬렉터 9V, 베이스에 5V와 3.3V 전압으로 테스트하는 C1815 트랜지스터파일 다운로드1
11651정성태8/14/201822680사물인터넷: 24. 9V 전압에서 테스트하는 C1815 트랜지스터 [1]파일 다운로드3
11650정성태8/14/201817097사물인터넷: 23. 가변저항으로 분압파일 다운로드1
11649정성태8/12/201819450사물인터넷: 22. 저항에 따른 전류 테스트파일 다운로드1
11648정성태8/12/201820874사물인터넷: 21. 퓨즈를 이용한 회로 보호파일 다운로드3
11647정성태8/8/201821000오류 유형: 476. 음수의 음수는 여전히 음수가 되는 수(절대값이 음수인 수)
11646정성태8/8/201817018오류 유형: 475. gacutil.exe 실행 시 "Failure initializing gacutil" 오류 발생
11645정성태8/8/201819268오류 유형: 474. 닷넷 COM+ - Failed to load the runtime. [1]
11644정성태8/6/201822140디버깅 기술: 118. windbg - 닷넷 개발자를 위한 MEX Debugging Extension 소개
11643정성태8/6/201821804사물인터넷: 20. 아두이노 레오나르도 R3 호환 보드의 3.3v 핀의 LED 전압/전류 테스트 [1]파일 다운로드1
11642정성태8/3/201820526Graphics: 20. Unity - LightMode의 ForwardBase에 따른 _WorldSpaceLightPos0 값 변화
11641정성태8/3/201826059Graphics: 19. Unity로 실습하는 Shader (10) - 빌보드 구현 [1]파일 다운로드1
11640정성태8/3/201822288Graphics: 18. Unity - World matrix(unity_ObjectToWorld)로부터 Position, Rotation, Scale 값을 복원하는 방법파일 다운로드1
11639정성태8/2/201819847디버깅 기술: 117. windbg - 덤프 파일로부터 추출한 DLL을 참조하는 방법
11638정성태8/2/201818226오류 유형: 473. windbg - 덤프 파일로부터 추출한 DLL 참조 시 "Resolved file has a bad image, no metadata, or is otherwise inaccessible." 빌드 오류
11637정성태8/1/201822668Graphics: 17. Unity - World matrix(unity_ObjectToWorld)로부터 TRS(이동/회전/크기) 행렬로 복원하는 방법파일 다운로드1
11636정성태8/1/201830054Graphics: 16. 3D 공간에서 두 점이 이루는 각도 구하기파일 다운로드1
11635정성태8/1/201818729오류 유형: 472. C# 컴파일 오류 - Your project is not referencing the ".NETFramework,Version=v3.5" framework.
... [91]  92  93  94  95  96  97  98  99  100  101  102  103  104  105  ...