windbg의 mscordacwks DLL 로드 문제 - 세 번째 이야기
어쩌다 보니 시리즈 글로 쓰게 되었군요. ^^
Windbg - ERROR: Unable to load DLL mscordacwks_x86_x86_2.0.50727.4200.dll, Win32 error 0n2
; https://www.sysnet.pe.kr/2/0/994
windbg의 mscordacwks DLL 로드 문제
; https://www.sysnet.pe.kr/2/0/1181
windbg의 mscordacwks DLL 로드 문제 - 두 번째 이야기
; https://www.sysnet.pe.kr/2/0/1375
정리해 볼까요? ^^
.NET Framework을 대상으로 하는 응용 프로그램의 덤프 파일을 '다른 PC에 복사해서' 분석하려는 경우 반드시 그 응용 프로그램이 설치된 환경으로부터 다음의 2가지 파일도 함께 가져와야 합니다.
또한, 덤프 파일의 대상이었던 프로세스가 64비트/32비트, CLR 2/4인지에 따라 각각 다음의 폴더에 있는 것으로 가져와야만 합니다.
.NET 응용 프로그램이 CLR2 + x86인 경우 - C:\Windows\Microsoft.NET\Framework\v2.0.50727
.NET 응용 프로그램이 CLR2 + x64인 경우 - C:\Windows\Microsoft.NET\Framework64\v2.0.50727
.NET 응용 프로그램이 CLR4 + x86인 경우 - C:\Windows\Microsoft.NET\Framework\v4.0.30319
.NET 응용 프로그램이 CLR4 + x64인 경우 - C:\Windows\Microsoft.NET\Framework64\v4.0.30319
자, 그럼 대상이 되는 sos.dll과 mscordacwks.dll 파일을 "C:\temp" 폴더에 복사해 두었고 windbg에서 덤프 파일을 열었다고 가정해 보겠습니다. 그럼 sos.dll을 다음과 같이 로드할 수 있고,
0:000> .load c:\temp\sos.dll
(대개의 경우) 이 단계에서 sos 관련 명령을 내리면 이렇게 오류가 발생하게 됩니다.
0:000> !clrstack
CLRDLL: Consider using ".cordll -lp <path>" command to specify .NET runtime directory.
Failed to load data access DLL, 0x80004005
Verify that 1) you have a recent build of the debugger (6.2.14 or newer)
2) the file mscordacwks.dll that matches your version of clr.dll is
in the version directory or on the symbol path
3) or, if you are debugging a dump file, verify that the file
mscordacwks_<arch>_<arch>_<version>.dll is on your symbol path.
4) you are debugging on supported cross platform architecture as
the dump file. For example, an ARM dump file must be debugged
on an X86 or an ARM machine; an AMD64 dump file must be
debugged on an AMD64 machine.
You can also run the debugger command .cordll to control the debugger's load of mscordacwks.dll. .cordll -ve -u -l will do a verbose reload.
If that succeeds, the SOS command should work on retry.
If you are debugging a minidump, you need to make sure that your executable path is pointing to clr.dll as well.
오호~~~ 그런데 최근 sos.dll에서는
지난번의 경우와는 다른 메시지가 보입니다.
CLRDLL: Consider using ".cordll -lp " command to specify .NET runtime directory.
예전에는 mscordacwks.dll 로드 문제를 해결하기 위해 해당 sos.dll이 요구하는 버전을 알아내려고 "cordll -ve -u -l" 명령어를 수행, 그에 맞게 "mscordacwks_x86_x86_2.0.50727.4005.dll"과 같은 식으로 파일명을 변경한 후 PATH 환경 변수에 지정된 경로에 복사해야 하는 복잡함이 있었는데요.
이제는 그냥 다음과 같이 "-lp" 스위치와 함께 mscordacwks.dll 파일이 있는 경로를 알려주기만 하면 됩니다.
0:000> .cordll -lp c:\temp
CLR DLL status: Loaded DLL c:\temp\mscordacwks.dll
세상 참 좋아졌군요. ^^
[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]