Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Visual Studio 빌드 실패 - The OutputPath property is not set for project

다음과 같은 메시지와 함께 빌드 실패가 난다면?

d:\temp\MyApp\bin>msbuild "..\TestWebApp\TestWebApp.csproj" /property:Platform=x86 /t:Rebuild /property:OutDir=d:\temp\MyApp\bin
Microsoft (R) Build Engine version 4.6.1586.0
[Microsoft .NET Framework, version 4.0.30319.42000]
Copyright (C) Microsoft Corporation. All rights reserved.

Build started 2017-03-14 오후 2:25:56.
The target "MvcBuildViews" listed in a BeforeTargets attribute at "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\Web\Microsoft.Web.Publishing.targets (845,131)" does not exist in the project, and will be ignored.
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" on node 1 (Rebuild target(s)).
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (1) is building "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (5) on node 1 (Clean target(s)).
Project file contains ToolsVersion="15.0". This toolset may be unknown or missing, in which case you may be able to resolve this by installing the appropriate version of MSBuild, or the build may have been forced to a particular ToolsVersion for policy reasons. Treating the project as if it had ToolsVersion="4.0". For more information, please see http://go.microsoft.com/fwlink/?LinkId=291333.
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]
Done Building Project "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target(s)) -- FAILED.

Done Building Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target(s)) -- FAILED.


Build FAILED.

"d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target) (1) ->
"d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target) (5) ->
(_CheckForInvalidConfigurationAndPlatform target) ->
  C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]

    0 Warning(s)
    1 Error(s)

Time Elapsed 00:00:00.48

오류 메시지를 잘 보시면 그 원인을 알 수 있습니다.

The OutputPath property is not set for project 'RefObjectLib.csproj'. Please check to make sure that you have specified a valid combination of Configuration and Platform for this project. Configuration='Debug' Platform='x86'. You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project.


그러니까, 위의 상황은 TestWebApp.csproj 프로젝트에서 RefObjectLib.csproj 프로젝트를 참조하고 있는 것입니다. 그렇기 때문에 TestWebApp.csproj를 msbuild로 Rebuild 명령을 내리니 의존 관계에서 따라 RefObjectLib.csproj 프로젝트부터 빌드를 시작한 것입니다.

문제는, RefObjectLib.csproj에 "OutputPath" 속성을 다음 Configuration='Debug' Platform='x86' 빌드 구성이 누락되어 있기 때문에 오류가 발생하였습니다.

실제로 RefObjectLib.csproj 프로젝트를 보면, PropertyGroup으로 "Debug|AnyCPU"와 "Release|AnyCPU"만 있을 뿐 "x86" 구성이 없는 것을 확인할 수 있습니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>

문제 해결은 간단합니다. RefObjectLib.csproj 파일의 "AnyCPU" 구성 외에 "x86" 구성을 만들어 주면 되는데, 이런 경우 Visual Studio의 "Configuration Manager"에서 할 수도 있지만 다음과 같은 오류 메시지로 추가를 못하는 수가 종종 있습니다.

This platform could not be created because a solution platform of the same name already exists.

당황하지 마시고, 그냥 메모장에서 .csproj 파일을 열고 'Debug|AnyCPU'와 'Release|AnyCPU' 구성을 그대로 복사해서 'x86'으로 만들어 주면 됩니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>

위의 내용만 추가하고 다시 빌드하면 정상적으로 바이너리가 생성되는 것을 확인할 수 있습니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 3/24/2017]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 121  122  123  124  125  126  127  128  [129]  130  131  132  133  134  135  ...
NoWriterDateCnt.TitleFile(s)
1865정성태2/20/201521111.NET Framework: 499. 특정 닷넷 프레임워크 버전 이후부터 제공되는 타입을 사용해야 한다면?
1864정성태2/18/201526076.NET Framework: 498. C#으로 간단하게 만들어 본 ASCII Art 프로그램 [2]파일 다운로드1
1862정성태2/18/201530117.NET Framework: 497. .NET Garbage Collection에 대한 정리 [6]
1861정성태2/18/201525292.NET Framework: 496. 마우스 커서가 놓인 지점의 문자열 얻는 방법 [1]파일 다운로드1
1860정성태2/18/201525240.NET Framework: 495. CorElementType의 요소 값 설명파일 다운로드1
1859정성태2/17/201525701Windows: 106. 컴퓨터를 재부팅하면 절전(Power Saver) 전원 모드로 돌아가는 경우
1858정성태2/16/201535595Windows: 105. 자동으로 로그아웃/잠김 화면 상태로 전환된다면? [2]
1857정성태2/16/201523703.NET Framework: 494. 값(struct) 형식의 제네릭(Generic) 타입이 박싱되는 경우의 메타데이터 토큰 값파일 다운로드1
1856정성태2/15/201522519.NET Framework: 493. TypeRef 메타테이블에 등록되는 타입의 조건파일 다운로드1
1855정성태2/10/201521961개발 환경 구성: 256. WebDAV Redirector - Sysinternals 폴더 연결 시 "The network path was not found" 오류 해결 방법
1854정성태2/10/201522853Windows: 104. 폴더는 삭제할 수 없지만, 그 하위 폴더/파일은 생성/삭제/변경하는 보안 설정
1853정성태2/6/201553378웹: 29. 여신금융협회 웹 사이트의 "Netscape 6.0은 지원하지 않습니다." 오류 메시지 [5]
1852정성태2/5/201523876.NET Framework: 492. .NET CLR Memory 성능 카운터의 의미파일 다운로드1
1851정성태2/5/201524594VC++: 88. 하룻밤의 꿈 - 인텔 하스웰의 TSX Instruction 지원 [2]
1850정성태2/4/201545474Windows: 103. 작업 관리자에서의 "Commit size"가 가리키는 메모리의 의미 [4]
1849정성태2/4/201525045기타: 51. DropBox의 CPU 100% 현상 [1]파일 다운로드1
1848정성태2/4/201520668.NET Framework: 491. 닷넷 Generic 타입의 메타 데이터 토큰 값 알아내는 방법 [2]
1847정성태2/3/201523999기타: 50. C# - 윈도우에서 dropbox 동기화 폴더 경로 및 종료하는 방법
1846정성태2/2/201533182Windows: 102. 제어판의 프로그램 추가/삭제 항목을 수동으로 실행하고 싶다면? [1]
1845정성태1/26/201534302Windows: 101. 제어판의 "Windows 자격 증명 관리(Manage your credentials)"를 금지시키는 방법
1844정성태1/26/201531912오류 유형: 269. USB 메모리의 용량이 비정상적으로 보여진다면? [7]
1843정성태1/24/201523070VC++: 87. 무시할 수 없는 Visual C++ 런타임 함수 성능
1842정성태1/23/201546111개발 환경 구성: 255. 노트북 키보드에 없는 BREAK 키를 다른 키로 대체하는 방법
1841정성태1/21/201520514오류 유형: 268. Win32 핸들 관련 CLR4 보안 오류 사례
1840정성태1/8/201528884오류 유형: 267. Visual Studio - CodeLens 사용 시 CPU 100% 현상
1839정성태1/5/201521529디버깅 기술: 69. windbg 분석 사례 - cpu 100% 현상 (2)
... 121  122  123  124  125  126  127  128  [129]  130  131  132  133  134  135  ...