Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Visual Studio 빌드 실패 - The OutputPath property is not set for project

다음과 같은 메시지와 함께 빌드 실패가 난다면?

d:\temp\MyApp\bin>msbuild "..\TestWebApp\TestWebApp.csproj" /property:Platform=x86 /t:Rebuild /property:OutDir=d:\temp\MyApp\bin
Microsoft (R) Build Engine version 4.6.1586.0
[Microsoft .NET Framework, version 4.0.30319.42000]
Copyright (C) Microsoft Corporation. All rights reserved.

Build started 2017-03-14 오후 2:25:56.
The target "MvcBuildViews" listed in a BeforeTargets attribute at "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\Web\Microsoft.Web.Publishing.targets (845,131)" does not exist in the project, and will be ignored.
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" on node 1 (Rebuild target(s)).
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (1) is building "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (5) on node 1 (Clean target(s)).
Project file contains ToolsVersion="15.0". This toolset may be unknown or missing, in which case you may be able to resolve this by installing the appropriate version of MSBuild, or the build may have been forced to a particular ToolsVersion for policy reasons. Treating the project as if it had ToolsVersion="4.0". For more information, please see http://go.microsoft.com/fwlink/?LinkId=291333.
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]
Done Building Project "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target(s)) -- FAILED.

Done Building Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target(s)) -- FAILED.


Build FAILED.

"d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target) (1) ->
"d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target) (5) ->
(_CheckForInvalidConfigurationAndPlatform target) ->
  C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]

    0 Warning(s)
    1 Error(s)

Time Elapsed 00:00:00.48

오류 메시지를 잘 보시면 그 원인을 알 수 있습니다.

The OutputPath property is not set for project 'RefObjectLib.csproj'. Please check to make sure that you have specified a valid combination of Configuration and Platform for this project. Configuration='Debug' Platform='x86'. You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project.


그러니까, 위의 상황은 TestWebApp.csproj 프로젝트에서 RefObjectLib.csproj 프로젝트를 참조하고 있는 것입니다. 그렇기 때문에 TestWebApp.csproj를 msbuild로 Rebuild 명령을 내리니 의존 관계에서 따라 RefObjectLib.csproj 프로젝트부터 빌드를 시작한 것입니다.

문제는, RefObjectLib.csproj에 "OutputPath" 속성을 다음 Configuration='Debug' Platform='x86' 빌드 구성이 누락되어 있기 때문에 오류가 발생하였습니다.

실제로 RefObjectLib.csproj 프로젝트를 보면, PropertyGroup으로 "Debug|AnyCPU"와 "Release|AnyCPU"만 있을 뿐 "x86" 구성이 없는 것을 확인할 수 있습니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>

문제 해결은 간단합니다. RefObjectLib.csproj 파일의 "AnyCPU" 구성 외에 "x86" 구성을 만들어 주면 되는데, 이런 경우 Visual Studio의 "Configuration Manager"에서 할 수도 있지만 다음과 같은 오류 메시지로 추가를 못하는 수가 종종 있습니다.

This platform could not be created because a solution platform of the same name already exists.

당황하지 마시고, 그냥 메모장에서 .csproj 파일을 열고 'Debug|AnyCPU'와 'Release|AnyCPU' 구성을 그대로 복사해서 'x86'으로 만들어 주면 됩니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>

위의 내용만 추가하고 다시 빌드하면 정상적으로 바이너리가 생성되는 것을 확인할 수 있습니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 3/24/2017]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 151  152  153  [154]  155  156  157  158  159  160  161  162  163  164  165  ...
NoWriterDateCnt.TitleFile(s)
1234정성태2/16/201228517.NET Framework: 303. 원본 파일의 공백/라인을 유지한 체 XML 파일을 저장하는 방법 [1]파일 다운로드1
1233정성태2/16/201234711.NET Framework: 302. supportedRuntime 옵션과 System.BadImageFormatException 예외 [5]
1232정성태2/9/201230591VC++: 57. 웹 브라우저에서 Flash만 빼고 다른 ActiveX를 차단할 수 있을까? [3]파일 다운로드1
1231정성태2/8/201240084VC++: 56. Win32 API 후킹 - Trampoline API Hooking [5]파일 다운로드1
1230정성태2/6/201225318개발 환경 구성: 140. 프로젝트 생성 시부터 "Enable the Visual Studio hosting process" 옵션을 끄는 방법
1229정성태2/4/201230533.NET Framework: 301. P/Invoke의 성능을 높이기 위해 C++/CLI가 선택되려면? [5]파일 다운로드1
1228정성태2/4/201279908.NET Framework: 300. C#으로 만드는 음성인식/TTS 프로그램 [47]파일 다운로드1
1227정성태2/3/201230744.NET Framework: 299. 해당 어셈블리가 Debug 빌드인지, Release 빌드인지 알아내는 방법파일 다운로드1
1226정성태1/28/201271908.NET Framework: 298. 홀 펀칭(Hole Punching)을 이용한 Private IP 간 통신 - C# [15]파일 다운로드3
1225정성태1/24/201227156.NET Framework: 297. 특정 EXE 파일의 실행을 Internet Explorer처럼 "Protected Mode"로 실행하는 방법 [1]파일 다운로드1
1224정성태1/21/201238659개발 환경 구성: 139. 아마존 EC2에 새로 추가된 "1년 무료 Windows 서버 인스턴스"가 있다는데, 직접 만들어 볼까요? ^^ [11]
1223정성태1/20/201228719.NET Framework: 296. 괜찮은 문자열 해시함수? - 두 번째 이야기 [1]파일 다운로드1
1222정성태1/18/201236378.NET Framework: 295. 괜찮은 문자열 해시 함수? [4]파일 다운로드1
1221정성태1/17/201225397오류 유형: 147. System.Runtime.InteropServices.COMException (0x80005000)
1220정성태1/15/201225694.NET Framework: 294. Master web.config 파일을 수정하려면?파일 다운로드1
1219정성태1/15/201227985.NET Framework: 293. Microsoft PowerPoint 슬라이드를 HTML 파일로 ".files" 폴더 없이 저장하는 방법 (C# 코드)파일 다운로드1
1218정성태1/15/201241016.NET Framework: 292. RSACryptoServiceProvider의 공개키와 개인키 구분 [1]파일 다운로드2
1217정성태1/14/201242790.NET Framework: 291. .NET에서 WAV, MP3 파일 재생하는 방법 [1]파일 다운로드1
1216정성태1/14/201231419오류 유형: 146. Microsoft Visual C++ 재배포 패키지 - 설치 로그 남기는 방법 [1]
1215정성태1/9/201228997제니퍼 .NET: 20. 제니퍼 닷넷 적용 사례 (3) - '닷넷'이 문제일까? '닷넷 개발자'가 문제일까? [6]
1214정성태1/3/201225665제니퍼 .NET: 19. 제니퍼 닷넷 설치/제거 방법 - IIS
1213정성태12/31/201125620.NET Framework: 290. WCF - 접속된 클라이언트의 IP 주소 알아내는 방법 - 두 번째 이야기
1212정성태12/31/201125760오류 유형: 145. The trust relationship between this workstation and the primary domain failed.
1211정성태12/31/201130539.NET Framework: 289. WindowsFormsHost를 사용하는 XBAP 응용 프로그램파일 다운로드1
1210정성태12/30/201149433.NET Framework: 288. FFmpeg.exe를 이용한 C# 동영상 인코더 예제 [9]파일 다운로드1
1209정성태12/29/201124120개발 환경 구성: 138. BizTalk 2006 설치 방법
... 151  152  153  [154]  155  156  157  158  159  160  161  162  163  164  165  ...