Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Visual Studio 빌드 실패 - The OutputPath property is not set for project

다음과 같은 메시지와 함께 빌드 실패가 난다면?

d:\temp\MyApp\bin>msbuild "..\TestWebApp\TestWebApp.csproj" /property:Platform=x86 /t:Rebuild /property:OutDir=d:\temp\MyApp\bin
Microsoft (R) Build Engine version 4.6.1586.0
[Microsoft .NET Framework, version 4.0.30319.42000]
Copyright (C) Microsoft Corporation. All rights reserved.

Build started 2017-03-14 오후 2:25:56.
The target "MvcBuildViews" listed in a BeforeTargets attribute at "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\Web\Microsoft.Web.Publishing.targets (845,131)" does not exist in the project, and will be ignored.
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" on node 1 (Rebuild target(s)).
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (1) is building "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (5) on node 1 (Clean target(s)).
Project file contains ToolsVersion="15.0". This toolset may be unknown or missing, in which case you may be able to resolve this by installing the appropriate version of MSBuild, or the build may have been forced to a particular ToolsVersion for policy reasons. Treating the project as if it had ToolsVersion="4.0". For more information, please see http://go.microsoft.com/fwlink/?LinkId=291333.
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]
Done Building Project "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target(s)) -- FAILED.

Done Building Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target(s)) -- FAILED.


Build FAILED.

"d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target) (1) ->
"d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target) (5) ->
(_CheckForInvalidConfigurationAndPlatform target) ->
  C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]

    0 Warning(s)
    1 Error(s)

Time Elapsed 00:00:00.48

오류 메시지를 잘 보시면 그 원인을 알 수 있습니다.

The OutputPath property is not set for project 'RefObjectLib.csproj'. Please check to make sure that you have specified a valid combination of Configuration and Platform for this project. Configuration='Debug' Platform='x86'. You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project.


그러니까, 위의 상황은 TestWebApp.csproj 프로젝트에서 RefObjectLib.csproj 프로젝트를 참조하고 있는 것입니다. 그렇기 때문에 TestWebApp.csproj를 msbuild로 Rebuild 명령을 내리니 의존 관계에서 따라 RefObjectLib.csproj 프로젝트부터 빌드를 시작한 것입니다.

문제는, RefObjectLib.csproj에 "OutputPath" 속성을 다음 Configuration='Debug' Platform='x86' 빌드 구성이 누락되어 있기 때문에 오류가 발생하였습니다.

실제로 RefObjectLib.csproj 프로젝트를 보면, PropertyGroup으로 "Debug|AnyCPU"와 "Release|AnyCPU"만 있을 뿐 "x86" 구성이 없는 것을 확인할 수 있습니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>

문제 해결은 간단합니다. RefObjectLib.csproj 파일의 "AnyCPU" 구성 외에 "x86" 구성을 만들어 주면 되는데, 이런 경우 Visual Studio의 "Configuration Manager"에서 할 수도 있지만 다음과 같은 오류 메시지로 추가를 못하는 수가 종종 있습니다.

This platform could not be created because a solution platform of the same name already exists.

당황하지 마시고, 그냥 메모장에서 .csproj 파일을 열고 'Debug|AnyCPU'와 'Release|AnyCPU' 구성을 그대로 복사해서 'x86'으로 만들어 주면 됩니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>

위의 내용만 추가하고 다시 빌드하면 정상적으로 바이너리가 생성되는 것을 확인할 수 있습니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 3/24/2017]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 151  152  153  154  155  156  157  158  159  [160]  161  162  163  164  165  ...
NoWriterDateCnt.TitleFile(s)
1093정성태7/27/201126345오류 유형: 130. Unable to connect to the Microsoft Visual Studio Remote Debugging Monitor ... Access is denied.
1092정성태7/22/201128868Team Foundation Server: 46. 코드 이외의 파일에 대해 소스 제어에서 제외시키는 방법
1091정성태7/21/201127812개발 환경 구성: 128. WP7 Emulator 실행 시 audiodg.exe의 CPU 소모율 증가 [2]
1089정성태7/18/201133556.NET Framework: 234. 왜? Button 컨트롤에는 MouseDown/MouseUp 이벤트가 발생하지 않을까요?파일 다운로드1
1088정성태7/16/201126892.NET Framework: 233. Entity Framework 4.1 - 윈도우 폰 7에서의 CodeFirst 순환 참조 문제파일 다운로드1
1087정성태7/15/201129231.NET Framework: 232. Entity Framework 4.1 - CodeFirst 개체의 직렬화 시 순환 참조 해결하는 방법 - 두 번째 이야기파일 다운로드1
1086정성태7/14/201130415.NET Framework: 231. Entity Framework 4.1 - CodeFirst 개체의 직렬화 시 순환 참조 해결하는 방법 [1]파일 다운로드1
1085정성태7/14/201130833.NET Framework: 230. Entity Framework 4.1 - Code First + WCF 서비스 시 EndpointNotFoundException 오류 - 두 번째 이야기파일 다운로드1
1084정성태7/11/201136458.NET Framework: 229. SQL 서버 - DB 테이블의 데이터 변경에 대한 알림 처리 [4]파일 다운로드1
1083정성태7/11/201130458.NET Framework: 228. Entity Framework 4.1 - Code First + WCF 서비스 시 EndpointNotFoundException 오류
1082정성태7/10/201130190.NET Framework: 227. basicHttpBinding + 사용자 정의 인증 구현 [2]파일 다운로드1
1081정성태7/9/201129216VC++: 53. Windows 7에서 gcc.exe 실행 시 Access denied 오류 [2]
1080정성태7/8/201127930웹: 23. Sysnet 웹 사이트의 HTML5 변환 기록 - 두 번째 이야기파일 다운로드1
1079정성태7/6/201132164오류 유형: 129. Hyper-V + Realtek 랜카드가 설치된 시스템의 BSOD 현상 [2]
1078정성태7/5/201139795VC++: 52. Chromium 컴파일하는 방법 [2]
1077정성태6/24/201137216.NET Framework: 226. HttpWebRequest 타입의 HaveResponse 속성 이야기파일 다운로드1
1076정성태6/23/201131732오류 유형: 128. SQL Express - User Instance 옵션을 사용한 경우 발생하는 오류 메시지 유형 2가지
1075정성태6/21/201127115VS.NET IDE: 69. 윈폰 프로젝트에서 WCF 서비스 참조할 때 Reference.cs 파일이 비어있는 경우
1074정성태6/20/201127261.NET Framework: 225. 닷넷 네트워크 라이브러리의 트레이스 기능파일 다운로드1
1073정성태6/20/201129494오류 유형: 127. Visual Studio에서 WCF 서비스의 이름 변경 시 발생할 수 있는 오류
1072정성태6/19/201129019.NET Framework: 224. EF 4.1 Code First에서 Identity 칼럼 생성하는 방법파일 다운로드1
1071정성태6/19/201132444.NET Framework: 223. Entity Framework 4.1의 Code First를 이용한 SQL Azure 데이터베이스 생성 [3]파일 다운로드1
1070정성태6/19/201130009.NET Framework: 222. Windows Azure - VM Role 베타 프로그램 참여 [2]
1069정성태6/18/201130087.NET Framework: 221. Cache 영향을 받지 않는 DNS 이름 풀이 [2]파일 다운로드1
1068정성태6/16/201127535개발 환경 구성: 127. Portable Library - 닷넷 N-Screen용 공통 라이브러리 제작 [1]
1067정성태6/15/201127109오류 유형: 126. Windows failed to apply the Group Policy Folder Options settings. [1]
... 151  152  153  154  155  156  157  158  159  [160]  161  162  163  164  165  ...