Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Visual Studio 빌드 실패 - The OutputPath property is not set for project

다음과 같은 메시지와 함께 빌드 실패가 난다면?

d:\temp\MyApp\bin>msbuild "..\TestWebApp\TestWebApp.csproj" /property:Platform=x86 /t:Rebuild /property:OutDir=d:\temp\MyApp\bin
Microsoft (R) Build Engine version 4.6.1586.0
[Microsoft .NET Framework, version 4.0.30319.42000]
Copyright (C) Microsoft Corporation. All rights reserved.

Build started 2017-03-14 오후 2:25:56.
The target "MvcBuildViews" listed in a BeforeTargets attribute at "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\Web\Microsoft.Web.Publishing.targets (845,131)" does not exist in the project, and will be ignored.
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" on node 1 (Rebuild target(s)).
Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (1) is building "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (5) on node 1 (Clean target(s)).
Project file contains ToolsVersion="15.0". This toolset may be unknown or missing, in which case you may be able to resolve this by installing the appropriate version of MSBuild, or the build may have been forced to a particular ToolsVersion for policy reasons. Treating the project as if it had ToolsVersion="4.0". For more information, please see http://go.microsoft.com/fwlink/?LinkId=291333.
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]
Done Building Project "d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target(s)) -- FAILED.

Done Building Project "d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target(s)) -- FAILED.


Build FAILED.

"d:\temp\MyApp\TestWebApp\TestWebApp.csproj" (Rebuild target) (1) ->
"d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj" (Clean target) (5) ->
(_CheckForInvalidConfigurationAndPlatform target) ->
  C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(609,5): error : The OutputPath property is not set for project 'RefObjectLib.csproj'.  Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.  Configuration='Debug'  Platform='x86'.  You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project. [d:\temp\MyApp\RefObjectLib\RefObjectLib.csproj]

    0 Warning(s)
    1 Error(s)

Time Elapsed 00:00:00.48

오류 메시지를 잘 보시면 그 원인을 알 수 있습니다.

The OutputPath property is not set for project 'RefObjectLib.csproj'. Please check to make sure that you have specified a valid combination of Configuration and Platform for this project. Configuration='Debug' Platform='x86'. You may be seeing this message because you are trying to build a project without a solution file, and have specified a non-default Configuration or Platform that doesn't exist for this project.


그러니까, 위의 상황은 TestWebApp.csproj 프로젝트에서 RefObjectLib.csproj 프로젝트를 참조하고 있는 것입니다. 그렇기 때문에 TestWebApp.csproj를 msbuild로 Rebuild 명령을 내리니 의존 관계에서 따라 RefObjectLib.csproj 프로젝트부터 빌드를 시작한 것입니다.

문제는, RefObjectLib.csproj에 "OutputPath" 속성을 다음 Configuration='Debug' Platform='x86' 빌드 구성이 누락되어 있기 때문에 오류가 발생하였습니다.

실제로 RefObjectLib.csproj 프로젝트를 보면, PropertyGroup으로 "Debug|AnyCPU"와 "Release|AnyCPU"만 있을 뿐 "x86" 구성이 없는 것을 확인할 수 있습니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
  </PropertyGroup>

문제 해결은 간단합니다. RefObjectLib.csproj 파일의 "AnyCPU" 구성 외에 "x86" 구성을 만들어 주면 되는데, 이런 경우 Visual Studio의 "Configuration Manager"에서 할 수도 있지만 다음과 같은 오류 메시지로 추가를 못하는 수가 종종 있습니다.

This platform could not be created because a solution platform of the same name already exists.

당황하지 마시고, 그냥 메모장에서 .csproj 파일을 열고 'Debug|AnyCPU'와 'Release|AnyCPU' 구성을 그대로 복사해서 'x86'으로 만들어 주면 됩니다.

  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
    <DebugSymbols>true</DebugSymbols>
    <DebugType>full</DebugType>
    <Optimize>false</Optimize>
    <OutputPath>bin\Debug\</OutputPath>
    <DefineConstants>DEBUG;TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>
  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
    <DebugType>pdbonly</DebugType>
    <Optimize>true</Optimize>
    <OutputPath>bin\Release\</OutputPath>
    <DefineConstants>TRACE</DefineConstants>
    <ErrorReport>prompt</ErrorReport>
    <WarningLevel>4</WarningLevel>
    <PlatformTarget>x86</PlatformTarget>
  </PropertyGroup>

위의 내용만 추가하고 다시 빌드하면 정상적으로 바이너리가 생성되는 것을 확인할 수 있습니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 3/24/2017]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 181  182  183  184  185  186  [187]  188  189  190  191  192  193  194  195  ...
NoWriterDateCnt.TitleFile(s)
399정성태11/12/200629243    답변글 .NET Framework: 75.8. 인증서/스마트 카드에 기반한 Managed Card - STS 구현(이 글의 내용은 재작성되어질 예정입니다.) [5]
369정성태10/22/200624744오류 유형: 15. 자동 업데이트 실패
367정성태10/22/200640796Windows: 3. IIS 7.0 다중 바인딩 설정하는 방법 [1]
365정성태10/21/200624150Windows: 2. 서버(build 5600)에 IIS 7.0 서비스와 .NET 3.0 설치 방법
359정성태10/17/200620056오류 유형: 14. VS.NET 빌드 오류 - FxCopCmd.exe returned error code 65.
358정성태10/17/200625460오류 유형: 13. WSE 3.0 서비스 관련 WSE101 오류 / Destination Unreachable
357정성태12/1/200627716.NET Framework: 74. WCF 이야기 [4]
378정성태10/28/200632645    답변글 .NET Framework: 74.1. WCF와 WSE 3.0의 활용 [4]파일 다운로드1
379정성태11/3/200631656    답변글 .NET Framework: 74.2. WCF로 구현하는 .NET Remoting [4]파일 다운로드1
380정성태10/28/200630526    답변글 .NET Framework: 74.3. 웹 서비스와 닷넷 리모팅으로써의 WCF 구현파일 다운로드1
381정성태10/28/200632975    답변글 .NET Framework: 74.4. WCF 서비스 참조 추가 메뉴 [2]
382정성태10/28/200638842    답변글 .NET Framework: 74.5. WCF 서비스를 IIS에서 호스팅하는 방법파일 다운로드1
383정성태10/28/200633680    답변글 .NET Framework: 74.6. IIS 6.0: 다중 Endpoint 제공파일 다운로드1
384정성태10/28/200630812    답변글 .NET Framework: 74.7. IIS 7.0: 다중 Endpoint 제공
389정성태11/11/200633453    답변글 .NET Framework: 74.8. WCF에 SSL 적용 (1) - Httpcfg.exe 도구를 이용한 SSL 설정
390정성태11/6/200630680    답변글 .NET Framework: 74.9. WCF에 SSL 적용 (2) - 서비스 제작파일 다운로드1
356정성태10/7/200626101COM 개체 관련: 19. COM의 Apartment를 이해해 보자. [8]
386light10/30/200621206    답변글 COM 개체 관련: 19.1. [답변]: COM 객체를 글로벌마샬으로 만든후, 사용한다.
355정성태10/9/200629059개발 환경 구성: 19. Internet_Zone 하위에 새로운 코드 그룹을 추가하는 예제 [4]파일 다운로드2
353정성태12/31/200637573개발 환경 구성: 18. 윈도우즈 인증서 서비스 이야기 [3]
354정성태10/23/200639531    답변글 개발 환경 구성: 18.1. 윈도우즈 인증서 서비스 설치
372정성태12/31/200641871    답변글 개발 환경 구성: 18.2. 웹 사이트에 SSL을 적용 [3]
373정성태10/24/200633319    답변글 개발 환경 구성: 18.3. 사용자 입장에서의 HTTPS 접근 (1)
374정성태10/25/200630497    답변글 개발 환경 구성: 18.4. 사용자 입장에서의 HTTPS 접근 (2)
391정성태11/7/200634544    답변글 개발 환경 구성: 18.5. 사용자 인증서 발급
392정성태11/11/200647344    답변글 개발 환경 구성: 18.6. 인증서 관리 (1) - 내보내기/가져오기
... 181  182  183  184  185  186  [187]  188  189  190  191  192  193  194  195  ...