Microsoft MVP성태의 닷넷 이야기
오류 유형: 429. 이벤트 로그 - User Policy could not be updated successfully [링크 복사], [링크+제목 복사],
조회: 21160
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 

이벤트 로그 - User Policy could not be updated successfully

gpupdate /force 명령어 수행 시 다음과 같은 오류가 발생합니다.

C:\WINDOWS\system32>gpupdate /force
Updating policy...

Computer Policy update has completed successfully.
User Policy could not be updated successfully. The following errors were encountered:

The processing of Group Policy failed. Windows could not determine if the user and computer accounts are in the same forest. Ensure the user domain name matches the name of a trusted domain that resides in the same forest as the computer account.

To diagnose the failure, review the event log or run GPRESULT /H GPReport.html from the command line to access information about Group Policy results.

이와 함께 이벤트 로그에 관련 항목이 기록됩니다.

Log Name:      System
Source:        Microsoft-Windows-GroupPolicy
Date:          2017-11-23 오후 12:04:28
Event ID:      1110
Task Category: None
Level:         Error
Keywords:      
User:          TESTAD\TestUser
Computer:      TESTMAIN.TESTAD.com
Description:
The processing of Group Policy failed. Windows could not determine if the user and computer accounts are in the same forest. Ensure the user domain name matches the name of a trusted domain that resides in the same forest as the computer account.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
    <EventID>1110</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>1</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2017-11-23T03:04:28.048164700Z" />
    <EventRecordID>70550</EventRecordID>
    <Correlation ActivityID="{17E672BE-0F2B-4DFD-99F6-D53F42876BFD}" />
    <Execution ProcessID="1028" ThreadID="1352" />
    <Channel>System</Channel>
    <Computer>TESTMAIN.TESTAD.com</Computer>
    <Security UserID="S-1-5-21-1990051354-560935109-2448667075-1104" />
  </System>
  <EventData>
    <Data Name="SupportInfo1">1</Data>
    <Data Name="SupportInfo2">2639</Data>
    <Data Name="ProcessingMode">0</Data>
    <Data Name="ProcessingTimeInMilliseconds">15</Data>
    <Data Name="ErrorCode">1722</Data>
    <Data Name="ErrorDescription">The RPC server is unavailable. </Data>
  </EventData>
</Event>

gpresult를 실행해,

C:\WINDOWS\system32> GPRESULT /H GPReport.html

생성된 gpreport.html를 보면 다음과 같은 내용이 있습니다.

During last computer policy refresh on 2017-11-23 오후 12:33:32
Error: Computer determined to be not in a site. Error code 0x77F.

During last user policy refresh on 2017-11-23 오후 12:33:32
The processing of Group Policy failed. Windows could not determine if the user and computer accounts are in the same forest. Ensure the user domain name matches the name of a trusted domain that resides in the same forest as the computer account.

딱히 해결 방법을 못 찾다가 결국 다음의 글에 따라,

Event ID 1110 - Group Policy Preprocessing (Active Directory)
; https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2008-R2-and-2008/cc727342(v=ws.10)

Disjoin and join the computer to the domain. Then log on with the same user account that experienced the problem.

해당 컴퓨터를 AD로부터 분리한 후 다시 연결하는 것으로 해결했습니다. (그러고 보면 잘 해결되지 않는 AD 문제는 다시 연결하면 해결되는 경우가 종종 있습니다.)




참고로, 다음과 같이 실행할 때마다 경고가 뜰 수 있습니다.

C:\WINDOWS\system32> gpupdate /force
Updating policy...

Computer Policy update has completed successfully.
User Policy update has completed successfully.

The following warnings were encountered during user policy processing:

The Group Policy Client Side Extension Folder Redirection was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance.

For more detailed information, review the event log or run GPRESULT /H GPReport.html from the command line to access information about Group Policy results.

Certain user policies are enabled that can only run during logon.

OK to log off? (Y/N)

로그오프/온 이후에도 gpupdate /force를 수행하면 다시 동일하게 경고가 뜨며, gpreport.html에도 다음과 같은 정도의 메시지만 들어 있습니다.

Folder Redirection did not complete policy processing because the user needs to log on again for the settings to be applied. Group Policy will attempt to apply the settings at the user's next logon.

Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 2017-11-23 오후 1:51:33 and 2017-11-23 오후 1:51:34.

그런데 이 경고는 그냥 무시하면 됩니다.

The Group Policy Client Side Extension Folder Redirection Issue 
; https://social.technet.microsoft.com/Forums/windowsserver/en-US/2ff78117-8d11-42b4-b5cd-07c1e3fab6d2/the-group-policy-client-side-extension-folder-redirection-issue?forum=winserverGP

위의 글에도 나오지만 원래 "Folder Redirection" 설정은 로그온 시에만 동기적으로 적용되는 정책이기 때문에 비동기 식으로 업데이트하는 gpupdate /force로 강제 설정을 하면 경고로 뜨는 것에 불과합니다. 즉, 어쨌든 로그온 시에 적용이 될 것이고 다시 gpupdate /force를 실행하면 그사이 또 바뀐 것에 대해 다음번 로그온 시에 적용하겠다는 경고일 뿐입니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]







[최초 등록일: ]
[최종 수정일: 7/17/2021]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 91  92  93  94  95  96  97  98  99  100  101  102  103  [104]  105  ...
NoWriterDateCnt.TitleFile(s)
11322정성태10/13/201718237디버깅 기술: 100. windbg - .NET 4.0 응용 프로그램의 Main 메서드에 Breakpoint 걸기
11321정성태10/11/201719767.NET Framework: 688. NGen 모듈과 .NET Profiler
11320정성태10/11/201720538.NET Framework: 687. COR_PRF_USE_PROFILE_IMAGES 옵션과 NGen의 "profiler-enhanced images" [1]
11319정성태10/11/201728147.NET Framework: 686. C# - string 배열을 담은 구조체를 직렬화하는 방법
11318정성태10/7/201720910VS.NET IDE: 122. 비주얼 스튜디오에서 관리자 권한을 요구하는 C# 콘솔 프로그램 제작 [1]
11317정성태10/4/201726065VC++: 120. std::copy 등의 함수 사용 시 _SCL_SECURE_NO_WARNINGS 에러 발생
11316정성태9/30/201724125디버깅 기술: 99. (닷넷) 프로세스(EXE)에 디버거가 연결되어 있는지 아는 방법 [4]
11315정성태9/29/201740205기타: 68. "시작하세요! C# 6.0 프로그래밍: 기본 문법부터 실전 예제까지" 구매하신 분들을 위한 C# 7.0/7.1 추가 문법 PDF [8]
11314정성태9/28/201721962디버깅 기술: 98. windbg - 덤프 파일로부터 닷넷 버전 확인하는 방법
11313정성태9/25/201719277디버깅 기술: 97. windbg - 메모리 덤프로부터 DateTime 형식의 값을 알아내는 방법파일 다운로드1
11312정성태9/25/201722293.NET Framework: 685. C# - 구조체(값 형식)의 필드를 리플렉션을 이용해 값을 바꾸는 방법파일 다운로드1
11311정성태9/20/201716823.NET Framework: 684. System.Diagnostics.Process 객체의 명시적인 해제 권장
11310정성태9/19/201720231.NET Framework: 683. WPF의 Window 객체를 생성했는데 GC 수집 대상이 안 되는 이유 [3]
11309정성태9/13/201718363개발 환경 구성: 335. Octave의 명령 창에서 실행한 결과를 복사하는 방법
11308정성태9/13/201719407VS.NET IDE: 121. 비주얼 스튜디오에서 일부 텍스트 파일을 무조건 메모장으로만 여는 문제파일 다운로드1
11307정성태9/13/201721915오류 유형: 421. System.Runtime.InteropServices.SEHException - 0x80004005
11306정성태9/12/201719959.NET Framework: 682. 아웃룩 사용자를 위한 중국어 스팸 필터 Add-in
11305정성태9/12/201721491개발 환경 구성: 334. 기존 프로젝트를 Visual Studio를 이용해 Github의 신규 생성된 repo에 올리는 방법 [1]
11304정성태9/11/201718625개발 환경 구성: 333. 3ds Max를 Hyper-V VM에서 실행하는 방법
11303정성태9/11/201721913개발 환경 구성: 332. Inno Setup 파일의 관리자 권한을 제거하는 방법
11302정성태9/11/201718138개발 환경 구성: 331. SQL Server Express를 위한 방화벽 설정
11301정성태9/11/201717040오류 유형: 420. SQL Server Express 연결 오류 - A network-related or instance-specific error occurred while establishing a connection to SQL Server.
11300정성태9/10/201720865.NET Framework: 681. dotnet.exe - run, exec, build, restore, publish 차이점 [3]
11299정성태9/9/201719620개발 환경 구성: 330. Hyper-V VM의 Internal Network를 Private 유형으로 만드는 방법
11298정성태9/8/201722893VC++: 119. EnumProcesses / EnumProcessModules API 사용 시 주의점 [1]
11297정성태9/8/201719551디버깅 기술: 96. windbg - 풀 덤프에 포함된 모든 닷넷 모듈을 파일로 저장하는 방법
... 91  92  93  94  95  96  97  98  99  100  101  102  103  [104]  105  ...