Microsoft MVP성태의 닷넷 이야기
Linux: 10. 윈도우의 GetTickCount와 리눅스의 clock_gettime [링크 복사], [링크+제목 복사],
조회: 26140
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
(연관된 글이 1개 있습니다.)

윈도우의 GetTickCount와 리눅스의 clock_gettime

GetTickCount에 대한,

윈도우 운영체제의 시간 함수 (1) - GetTickCount와 timeGetTime의 차이점
; https://www.sysnet.pe.kr/2/0/11063

리눅스의 대응 함수를 찾는 중에 std::clock 함수가 눈에 들어왔습니다.

std::clock
; https://en.cppreference.com/w/cpp/chrono/c/clock

그래서 다음과 같이 테스트했더니,

clock_t dwStart = std::clock();
usleep(1000 * 1000); // 1초 sleep
clock_t dwEnd = std::clock();

clock_t dwDiff = dwEnd - dwStart;
printf("%d\n", dwDiff); // 출력 결과 0

0이 나옵니다. ^^; 왜냐하면, std::clock은 내부적으로 clock_gettime을 호출하는데, strace로 확인해 보면 CLOCK_PROCESS_CPUTIME_ID로 호출하는 것과 같습니다.

struct timespec tspec;
clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &tspec); // == std::clock();

인자가 의미하는 바에 따라,

/* High-resolution timer from the CPU.  */
# define CLOCK_PROCESS_CPUTIME_ID	2

/* Thread-specific CPU-time clock.  */
# define CLOCK_THREAD_CPUTIME_ID	3

이것은 해당 프로세서(CPU)를 사용한 시간을 반환하는 것으로 usleep 등으로 인해 작업을 하지 않은 경우에는 CPU 사용을 하지 않았으므로 0에 가까운 값을 반환하는 것입니다. 윈도우 환경으로 말하면 GetProcessTimes에 해당하는 것입니다.

그런데, 엄밀히 따지면 std::clock으로 유효하지 않은 값을 반환하는 경우가 발생할 수 있습니다. 가령 다음과 같은 상황에서,

clock_t dwStart = std::clock();
// ... 복잡한 작업 ...
clock_t dwEnd = std::clock();

중간의 작업을 하다가 스레드 문맥 전환이 발생해 다른 스레드가 해당 CPU에서 스케줄링되면 std::clock은 그 스레드가 수행한 작업량까지 더한 값을 반환하게 됩니다. 따라서 그런 문제를 없애고 싶다면 std::clock보다는 clock_gettime에 CLOCK_THREAD_CPUTIME_ID 옵션으로 직접 호출하는 것이 맞을 것입니다.

struct timespec tspec;
clock_gettime(CLOCK_THREAD_CPUTIME_ID, &tspec); // 윈도우의 GetCpuTimes




GetTickCount에 해당하는 작업은 clock_gettime에 CLOCK_REALTIME_COARSE를 주면 됩니다.

/* Identifier for system-wide realtime clock, updated only on ticks.  */
# define CLOCK_REALTIME_COARSE      5

clock_gettime(CLOCK_REALTIME_COARSE, &tspec); // 윈도우의 GetTickCount();

또는, 윈도우의 QueryPerformanceCounter라면 CLOCK_MONOTONIC을 주는 것이 그나마 의미상 비슷할 것입니다.

/* Monotonic system-wide clock.  */
# define CLOCK_MONOTONIC		1

clock_gettime(CLOCK_MONOTONIC, &tspec); // 윈도우의 QueryPerformanceCounter();

참고로, CLOCK_MONOTONIC과 유사하게 CLOCK_REALTIME이 있긴 한데,

/* Identifier for system-wide realtime clock.  */
# define CLOCK_REALTIME         0

주석에서 보는 바와 같이,

System-wide clock that measures real (i.e., wall-clock) time. Setting this clock requires appropriate privileges. This clock is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the clock), and by the incremental adjustments performed by adjtime(3) and NTP.


구간의 시간을 취합하기에는 적절한 옵션이 아닙니다.




그런데, clock_gettime을 이용해 구간 내 시간을 측정하려면 약간의 계산을 요합니다. 가령, 다음과 같이 시간 측정을 하면,

struct timespec s_tspec;
struct timespec e_tspec;

{
    clock_gettime(CLOCK_MONOTONIC, &s_tspec);
    usleep(1500 * 1000);
    clock_gettime(CLOCK_MONOTONIC, &e_tspec);
}

timespec 구조체는,

/* POSIX.1b structure for a time value.  This is like a `struct timeval' but
   has nanoseconds instead of microseconds.  */
struct timespec
{
  __time_t tv_sec;		/* Seconds.  */
  __syscall_slong_t tv_nsec;	/* Nanoseconds.  */
};

흐른 시간 값에 대해 초와 나노초 단위로 분리해 보관하고 있기 때문에 다음과 같은 식으로 흐른 시간을 계산해야 합니다.

// Profiling Code Using clock_gettime
// ; https://www.guyrutenberg.com/2007/09/22/profiling-code-using-clock_gettime/

#define NANO_PER_SEC ((__clock_t) 1000000000)

timespec diff(timespec start, timespec end)
{
    timespec temp;
    if ((end.tv_nsec - start.tv_nsec) < 0) {
        temp.tv_sec = end.tv_sec - start.tv_sec - 1;
        temp.tv_nsec = NANO_PER_SEC + end.tv_nsec - start.tv_nsec;
    }
    else {
        temp.tv_sec = end.tv_sec - start.tv_sec;
        temp.tv_nsec = end.tv_nsec - start.tv_nsec;
    }
    return temp;
}

그리고 그 timespec을 다시 특정 시간 단위로 환산해서 구할 수 있습니다.

#define NANO_PER_MILLI  ((__clock_t) 1000000)
#define MILLI_PER_SEC  ((__clock_t) 1000)

clock_t gettotalnanosec(const timespec& time)
{
    return time.tv_sec * NANO_PER_SEC + time.tv_nsec;
}

clock_t gettotalmillisec(const timespec& time)
{
    return time.tv_sec * MILLI_PER_SEC + time.tv_nsec / NANO_PER_MILLI;
}

따라서, 대충 다음과 같은 식으로 구간별 시간을 측정할 수 있습니다.

{
    struct timespec s_tspec;
    struct timespec e_tspec;

    clock_gettime(CLOCK_MONOTONIC, &s_tspec);
    usleep(500 * 1000);
    clock_gettime(CLOCK_MONOTONIC, &e_tspec);

    timespec diffspec = diff(s_tspec, e_tspec);
    clock_t timeDiff = gettotalmillisec(diffspec);

    printf("%lu\n", timeDiff);
}

(첨부 파일은 이 글의 예제 코드를 포함합니다.)




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 5/24/2019]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




1  [2]  3  4  5  6  7  8  9  10  11  12  13  14  15  ...
NoWriterDateCnt.TitleFile(s)
13986정성태8/6/20251965닷넷: 2350. C# 14 - (5) 람다 매개 변수에 접근자가 있는 경우에도 타입 생략 가능파일 다운로드1
13985정성태8/6/20252452오류 유형: 973. "wsl --install" 명령어 수행 시 "The server name or address could not be resolved"
13984정성태8/6/20252327Windows: 282. 윈도우 운영체제에 추가된 ssh 서버(Win32-OpenSSH)
13983정성태8/4/20252413오류 유형: 972. Microsoft.Data.SqlClient 6.1.0 버전부터 .NET 8 이상만 지원
13982정성태8/2/20252431개발 환경 구성: 753. CentOS 7 컨테이너 내에서 openssh 서버 호스팅
13981정성태8/1/20252202오류 유형: 971. CentOS 7에서 yum 사용 시 "Could not resolve host: mirrorlist.centos.org; Unknown error"
13980정성태7/31/20252300Linux: 119. eBPF - BPF_PROG_TYPE_CGROUP_SOCK 유형에서 정상 동작하지 않는 BPF_CORE_READ (2)
13979정성태7/30/20252640Linux: 118. eBPF - BPF_PROG_TYPE_CGROUP_SOCK 유형에서 정상 동작하지 않는 BPF_CORE_READ
13978정성태7/29/20252244오류 유형: 970. 파일 복사 시 "Data error (cyclic redundancy check). (0x80070017)" 에러
13977정성태7/28/20252750닷넷: 2349. C# 14 - (4) 문자열 리터럴을 utf-8 인코딩으로 저장파일 다운로드1
13976정성태7/25/20252556닷넷: 2348. C# - 카카오 카나나 모델 + Microsoft.ML.OnnxRuntimeGenAI 예제파일 다운로드1
13975정성태7/23/20252398닷넷: 2347. C# 14 - (3) 형식 인자가 없는 제네릭 타입의 nameof 지원파일 다운로드1
13974정성태7/22/20252488닷넷: 2346. C# 14 - (2) Span 타입과 배열 간의 암시적 형변환파일 다운로드1
13973정성태7/21/20252521닷넷: 2345. C# - 배열 및 Span의 공변성파일 다운로드1
13972정성태7/21/20252225닷넷: 2344. C#의 Identity conversion 의미파일 다운로드1
13971정성태7/17/20252582닷넷: 2343. C# 14 - (1) 속성 구문에서 문맥 키워드로 추가되는 field 예약어파일 다운로드1
13970정성태7/17/20252375닷넷: 2342. C# 14 - (취소된 글)
13969정성태7/17/20252368닷넷: 2341. snap으로 설치한 .NET 리눅스 실행 환경
13968정성태7/16/20252297오류 유형: 969. lddtree - TypeError: 'type' object is not subscriptable
13967정성태7/16/20253112오류 유형: 968. snap으로 설치한 "dotnet run" 실행 시 "undefined symbol: _dl_audit_symbind_alt, version GLIBC_PRIVATE" 오류
13966정성태7/15/20253771디버깅 기술: 223. WinDbg - .kframes 명령어
13965정성태7/11/20252750오류 유형: 967. 디버깅 모드로 실행 시 "Could not find file 'C:\Program Files\IIS Express\Oracle.DataAccess.Common.Configuration.Section.xsd'" 예외
13964정성태7/10/20254123닷넷: 2340. C# - Win32 Multimedia Timer 주기파일 다운로드1
13963정성태7/8/20253372VS.NET IDE: 202. Visual Studio 2022 + Copilot 기본 사용법
13962정성태7/7/20253154스크립트: 79. 파이썬 - onnxruntime_genai에서 지원하지 않는 모델 사용
13961정성태7/5/20252955디버깅 기술: 222. WinDbg 분석 사례 - IISreset 시점에 w3wp.exe의 crash 발생
1  [2]  3  4  5  6  7  8  9  10  11  12  13  14  15  ...