Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 3개 있습니다.)
(시리즈 글이 3개 있습니다.)
.NET Framework: 116. 소켓 연결 시간 제한
; https://www.sysnet.pe.kr/2/0/629

.NET Framework: 272. 소켓 연결 시간 제한 - 두 번째 이야기
; https://www.sysnet.pe.kr/2/0/1177

개발 환경 구성: 457. 윈도우 응용 프로그램의 Socket 연결 시 time-out 시간 제어
; https://www.sysnet.pe.kr/2/0/12015




윈도우 응용 프로그램의 Socket 연결 시 time-out 시간 제어

일단 기본적인 제어는,

Which is the default TCP connect timeout in Windows?
; https://serverfault.com/questions/193160/which-is-the-default-tcp-connect-timeout-in-windows

Appendix A: TCP/IP Configuration Parameters
; https://learn.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2003/cc739819(v=ws.10)

TcpInitialRTT: Defines what the initial time-out settings are for new connections. This number in seconds is doubled each time it retransmits before timing a connection out. Defaults to 3.

TcpMaxConnectRetransmissions: Defines the number of retransmissions before timing a connection out. Defato 5.

How to set TCP/IP abort interval or timeout in Windows XP?
; https://superuser.com/questions/339959/how-to-set-tcp-ip-abort-interval-or-timeout-in-windows-xp

TcpInitialRTT, TcpMaxConnectRetransmissions 관련 값들을 통해 이뤄집니다. 그런데 이게 윈도우 서버 2008 R2/7까지는 레지스트리 설정(HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters)으로 가능한 반면, 2012를 기점으로 netsh 관리로 통합이 됩니다.

테스트를 간단하게 만들기 위해 최신 버전 기준인 Windows Server 2019에서 TcpInitialRTT, TcpMaxConnectRetransmissions 값을 다음의 명령어로 구할 수 있고,

C:\Windows\system32> netsh interface tcp show global
Querying active state...

TCP Global Parameters
----------------------------------------------
Receive-Side Scaling State          : enabled
Chimney Offload State               : automatic
NetDMA State                        : enabled
Direct Cache Acess (DCA)            : disabled
Receive Window Auto-Tuning Level    : normal
Add-On Congestion Control Provider  : none
ECN Capability                      : disabled
RFC 1323 Timestamps                 : disabled
Initial RTO                         : 3000
Non Sack Rtt Resiliency             : disabled
Max SYN Retransmissions             : 2
** The above autotuninglevel setting is the result of Windows Scaling heuristics

overriding any local/policy configuration on at least one profile.

/*
[(개인적으로 테스트 중인) 운영체제별 기본값]

Windows Server 2012 R2: TcpInitialRTT (3000), TcpMaxConnectRetransmissions (2) - timeout 21초
Windows Server 2016:    TcpInitialRTT (3000), TcpMaxConnectRetransmissions (2) - timeout 21초
Windows Server 2019:    TcpInitialRTT (3000), TcpMaxConnectRetransmissions (2) - timeout 21초 
Windows Server 2022:    TcpInitialRTT (1000), TcpMaxConnectRetransmissions (4) - timeout 31초 
*/

해당 값들의 변경은 이런 식으로 할 수 있습니다.

C:\Windows\system32> netsh interface tcp set global MaxSynRetransmissions=2
Ok.

C:\Windows\system32> netsh interface tcp set global InitialRto=1000
Ok.

그럼, 실제로 Socket 코드를 다음과 같이 작성하고,

using (Socket clntSock = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp))
{
    var entry = Dns.GetHostEntry(target);
    clntSock.Connect(new IPEndPoint(entry.AddressList[0], port));
}

기본 값 상태에서,

TcpInitialRTT == 3000
TcpMaxConnectRetransmissions == 2

외부 인터넷 망에 있는 서버를 대상으로 listening하지 않는 포트에 대해 테스트를 해보면 21초가 걸리는 것을 확인할 수 있습니다.

c:\temp> ConsoleApp1.exe www.sysnet.pe.kr 8032
21203.2789

21초가 걸린 이유는 계산 결과와,

RTO: 3000 = 3초
1번 재시도: 3000 * 2 = 6초
2번 재시도: 6000 * 2 = 12초
-------------------------------
총 21초

일치합니다. 그럼, 설정값을 변경도 해봐야겠지요. ^^

TcpInitialRTT == 2000
TcpMaxConnectRetransmissions == 2

RTO: 2000 = 2초
1번 재시도: 2000 * 2 = 4초
2번 재시도: 4000 * 2 = 8초
-------------------------------
총 14초

실행해 보면,

c:\temp>ConsoleApp1.exe
14042.6988

예상했던 데로, 대략 14초(14000ms)가 걸렸습니다.




참고로, TcpInitialRTT, TcpMaxConnectRetransmissions 값을 조절하다 보면 Connection Timeout 시간이 지나치게 오래 걸릴 수 있는데,

TcpInitialRTT == 3000
TcpMaxConnectRetransmissions == 5

RTO: 3000 = 3초
1번 재시도: 3000 * 2 = 6초
2번 재시도: 6000 * 2 = 12초
3번 재시도: 12000 * 2 = 24초
4번 재시도: 24000 * 2 = 48초
5번 재시도: 48000 * 2 = 96초
-------------------------------
총 189초

정작 실행해 보면 100초 정도에 끝납니다.

c:\temp>ConsoleApp1.exe
100058.9233

왜냐하면, 최댓값이 100초이기 때문입니다. 관련해서 다음의 Q&A를 보면,

Window registy: TCPMaxConnectRetransmissions
; https://social.technet.microsoft.com/Forums/windows/en-US/110271d5-5221-44b4-af14-f07f3fa01a73/window-registy-tcpmaxconnectretransmissions?forum=w7itpronetworking

Windows 2003에서는 최댓값이 120초라고 하니 이것 역시 윈도우 버전마다 다를 수 있습니다.




경험상, 이와 관련된 값들을 굳이 설정해야 한다면 반드시 해당 환경에서 테스트를 해보는 것이 좋습니다. 일례로 예전에 소개했던 장애 환경의 경우,

.NET Remoting에서 서비스 호출 시 SYN_SENT로 남는 현상
; https://www.sysnet.pe.kr/2/0/11998

원인은 알 수 없었지만 일단 TcpInitialRTT, TcpMaxConnectRetransmissions 레지스트리 값을 조정한 경우 연결 시간은 제어가 되었는데 - 즉, SYN_SENT로 남는 시간을 제어할 수 있었지만 아쉽게도 시스템이 일정 시간 동작한 후에는 다시 무한대의 time-out 시간으로 바뀌는 현상이 발생했습니다. 일단 그런 경우도 있다는 것을 알아만 두시고. ^^

그 외에, maxsynretransmissions과 initialrto에 설정 가능한 값의 범위는 netsh 도움말에 나옵니다.

C:\> netsh interface tcp set global ?

Usage: set global [[rss=]disabled|enabled|default]
             [[autotuninglevel=]
                disabled|highlyrestricted|restricted|normal|experimental]
             [[congestionprovider=]none|ctcp|default]
             [[ecncapability=]disabled|enabled|default]
             [[timestamps=]disabled|enabled|default]
             [[initialrto=]<300-3000>]
             [[rsc=]disabled|enabled|default]
             [[nonsackrttresiliency=]disabled|enabled|default]
             [[maxsynretransmissions=]<2-8>]
             [[fastopen=]disabled|enabled|default]
             [[fastopenfallback=]disabled|enabled|default]
             [[hystart=]disabled|enabled|default]
             [[pacingprofile=]off|initialwindow|slowstart|always|default]
...[생략]...

기타... Windows Server 2008 R2 이하에서는 "netsh interface tcp show global" 명령어의 출력이 다음과 같습니다.

C:\Windows\system32> netsh interface tcp show global
Querying active state...

TCP Global Parameters
----------------------------------------------
Receive-Side Scaling State          : enabled
Chimney Offload State               : disabled
Receive Window Auto-Tuning Level    : disabled
Add-On Congestion Control Provider  : ctcp
ECN Capability                      : disabled
RFC 1323 Timestamps                 : disabled




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 4/22/2025]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




1  2  3  4  5  6  7  8  [9]  10  11  12  13  14  15  ...
NoWriterDateCnt.TitleFile(s)
13754정성태10/4/20246781닷넷: 2304. C# 13 - (8) 부분 메서드 정의를 속성 및 인덱서에도 확대파일 다운로드1
13753정성태10/4/20246433Linux: 81. Linux - PATH 환경변수의 적용 규칙
13752정성태10/2/20247643닷넷: 2303. C# 13 - (7) ref struct의 interface 상속 및 제네릭 제약으로 사용 가능 [6]파일 다운로드1
13751정성태10/2/20246213C/C++: 176. C/C++ - ARM64로 포팅할 때 유의할 점
13750정성태10/1/20246057C/C++: 175. C++ - WinMain/wWinMain 호출 전의 CRT 초기화 단계
13749정성태9/30/20246226닷넷: 2302. C# - ssh-keygen으로 생성한 Private Key와 Public Key 연동파일 다운로드1
13748정성태9/29/20246673닷넷: 2301. C# - BigInteger 타입이 byte 배열로 직렬화하는 방식
13747정성태9/28/20247327닷넷: 2300. C# - OpenSSH의 공개키 파일에 대한 "BEGIN OPENSSH PUBLIC KEY" / "END OPENSSH PUBLIC KEY" PEM 포맷파일 다운로드1
13746정성태9/28/20246509오류 유형: 924. Python - LocalProtocolError("Illegal header value ...")
13745정성태9/28/20246375Linux: 80. 리눅스 - 실행 중인 프로세스 내부의 환경변수 설정을 구하는 방법 (lldb)
13744정성태9/27/20246883닷넷: 2299. C# - Windows Hello 사용자 인증 다이얼로그 표시하기파일 다운로드1
13743정성태9/26/20247560닷넷: 2298. C# - Console 프로젝트에서의 await 대상으로 Main 스레드 활용하는 방법 [1]
13742정성태9/26/20247598닷넷: 2297. C# - ssh-keygen으로 생성한 ecdsa 유형의 Public Key 파일 해석 [1]파일 다운로드1
13741정성태9/25/20246932디버깅 기술: 202. windbg - ASP.NET MVC Web Application (.NET Framework) 응용 프로그램의 덤프 분석 시 요령
13740정성태9/24/20246566기타: 86. RSA 공개키 등의 modulus 값에 0x00 선행 바이트가 있는 이유(ASN.1 인코딩)
13739정성태9/24/20246838닷넷: 2297. C# - ssh-keygen으로 생성한 Public Key 파일 해석과 fingerprint 값(md5, sha256) 생성 [1]파일 다운로드1
13738정성태9/22/20246525C/C++: 174. C/C++ - 윈도우 운영체제에서의 file descriptor, FILE*파일 다운로드1
13737정성태9/21/20247037개발 환경 구성: 727. Visual C++ - 리눅스 프로젝트를 위한 빌드 서버의 msbuild 구성
13736정성태9/20/20247060오류 유형: 923. Visual Studio Code - Could not establish connection to "...": Port forwarding is disabled.
13735정성태9/20/20246804개발 환경 구성: 726. ARM 플랫폼용 Visual C++ 리눅스 프로젝트 빌드
13734정성태9/19/20246475개발 환경 구성: 725. ssh를 이용한 원격 docker 서비스 사용
13733정성태9/19/20246978VS.NET IDE: 194. Visual Studio - Cross Platform / "Authentication Type: Private Key"로 접속하는 방법
13732정성태9/17/20247124개발 환경 구성: 724. ARM + docker 환경에서 .NET 8 설치
13731정성태9/15/20247645개발 환경 구성: 723. C# / Visual C++ - Control Flow Guard (CFG) 활성화 [1]파일 다운로드2
13730정성태9/10/20248023오류 유형: 922. docker - RULE_APPEND failed (No such file or directory): rule in chain DOCKER
13729정성태9/9/20248888C/C++: 173. Windows / C++ - AllocConsole로 할당한 콘솔과 CRT 함수 연동 [1]파일 다운로드1
1  2  3  4  5  6  7  8  [9]  10  11  12  13  14  15  ...