Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
(연관된 글이 1개 있습니다.)
(시리즈 글이 9개 있습니다.)
개발 환경 구성: 92. 윈도우 서버 환경에서, 최대 생성 가능한 소켓(socket) 연결 수는 얼마일까?
; https://www.sysnet.pe.kr/2/0/964

Windows: 175. 윈도우 환경에서 클라이언트 소켓의 최대 접속 수
; https://www.sysnet.pe.kr/2/0/12350

Windows: 178. 윈도우 환경에서 클라이언트 소켓의 최대 접속 수 (2) - SO_REUSEADDR
; https://www.sysnet.pe.kr/2/0/12432

Windows: 179. 윈도우 환경에서 클라이언트 소켓의 최대 접속 수 (3) - SO_PORT_SCALABILITY
; https://www.sysnet.pe.kr/2/0/12433

Windows: 181. 윈도우 환경에서 클라이언트 소켓의 최대 접속 수 (4) - ReuseUnicastPort를 이용한 포트 고갈 문제 해결
; https://www.sysnet.pe.kr/2/0/12435

.NET Framework: 981. C# - HttpWebRequest, WebClient와 ephemeral port 재사용
; https://www.sysnet.pe.kr/2/0/12448

.NET Framework: 982. C# - HttpClient에서의 ephemeral port 재사용
; https://www.sysnet.pe.kr/2/0/12449

.NET Framework: 983. C# - TIME_WAIT과 ephemeral port 재사용
; https://www.sysnet.pe.kr/2/0/12450

Linux: 35. C# - 리눅스 환경에서 클라이언트 소켓의 ephemeral port 재사용
; https://www.sysnet.pe.kr/2/0/12459




윈도우 환경에서 클라이언트 소켓의 최대 접속 수 (3) - SO_PORT_SCALABILITY

아래의 글에서,

윈도우 서버 환경에서, 최대 생성 가능한 소켓(socket) 연결 수는 얼마일까?
; https://www.sysnet.pe.kr/2/0/964

윈도우 환경에서 클라이언트 소켓의 최대 접속 수
; https://www.sysnet.pe.kr/2/0/12350

윈도우 환경에서 클라이언트 소켓의 최대 접속 수 (2) - SO_REUSEADDR
; https://www.sysnet.pe.kr/2/0/12432

클라이언트 소켓에 대한 5-tuple 구분 값 확장을 SO_REUSEADDR로 가능하지만 현실성이 없다고 했는데요. 기왕 살펴보는 김에 또 다른 확장으로 SO_PORT_SCALABILITY 옵션을 보겠습니다.

SO_PORT_SCALABILITY
; https://docs.microsoft.com/en-us/windows/win32/winsock/so-port-scalability

문서에도 잘 나오지만,

  1. The socket function is called by a process to create a socket.
  2. The setsockopt function is called to enable the SO_PORT_SCALABILITY socket option on the newly created socket.
  3. The bind function is called to do a bind on one of the local computer's IP addresses and port 0.
  4. The connect function is then called to connect to a remote IP address. The socket is used by the application as needed.
  5. A socket function is called by the same process (possibly a different thread) to create a second socket.
  6. The setsockopt function is called to enable the SO_PORT_SCALABILITY socket option on the newly created second socket.
  7. The bind function is called with the local computer's second IP address and port 0. Even when all ports have been previously allocated, this call succeeds because there are multiple IP addresses available on the local computer and the SO_PORT_SCALABILITY socket option was set on both sockets in the same process.
  8. The connect function is then called to connect to a remote IP address. The second socket is used by the application as needed.

이 옵션을 적용해 바인딩하면, 시스템에 할당된 IP 주소만큼 배수로 중복 포트를 활용할 수 있습니다. 예를 들어, "169.254.44.76", "192.168.100.80" IP가 부여된 컴퓨터가 있다고 가정했을 때 지난번 예제 코드의 클라이언트 측을 다음과 같이 수정하면,

using System;
using System.Collections.Generic;
using System.Net;
using System.Net.Sockets;
using System.Runtime.InteropServices;

namespace ConsoleApp2
{
    class Program
    {
        [DllImport("Ws2_32.dll")]
        public static extern int setsockopt(IntPtr s, SocketOptionLevel level, int optname, ref int optval, int optlen);

        const int SO_PORT_SCALABILITY = 0x3006;

        static void Main(string[] args)
        {
            string ipAddr = args[0];
            int port = int.Parse(args[1]);
            int numberOf = int.Parse(args[2]);

            string targetIp = ipAddr;
            if (args.Length >= 4)
            {
                targetIp = args[3];
            }

            List<Socket> clients1 = new List<Socket>();
            int trueValue = 1;

            try
            {
                for (int i = 0; i < numberOf; i++)
                {
                    try
                    {
                        Socket client = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);

                        setsockopt(client.Handle, SocketOptionLevel.Socket, SO_PORT_SCALABILITY, ref trueValue, sizeof(int));
                        // 또는, client.SetSocketOption(SocketOptionLevel.Socket, (SocketOptionName)0x3006, true);

                        client.Bind(new IPEndPoint(IPAddress.Parse(ipAddr), 0));
                        client.Connect(targetIp, port);

                        Console.WriteLine($"{client.LocalEndPoint}-{client.RemoteEndPoint}");

                        clients1.Add(client);
                    }
                    catch { }
                }
            }
            catch (Exception e)
            {
                Console.WriteLine(e.ToString());
            }

            Console.WriteLine(clients1.Count);
            Console.ReadLine();
        }
    }
}

서버와 클라이언트의 실행 결과를 각각 다음과 같이 확인할 수 있습니다.

// 서버 측 포트 15000, 15001 Listen

D:\temp> ConsoleApp1.exe
# of 15000: 0, 15001: 0
# of 15000: 0, 15001: 0
# of 15000: 0, 15001: 0
# of 15000: 970, 15001: 0
# of 15000: 970, 15001: 0
# of 15000: 970, 15001: 0
# of 15000: 970, 15001: 0
# of 15000: 970, 15001: 970
# of 15000: 970, 15001: 970
# of 15000: 970, 15001: 970

// #1 클라이언트 측 - 로컬 IP 중의 하나인 169.254.44.76을 사용해 15000 포트로 1001개 접속 시도

d:\temp> ConsoleApp2 169.254.44.76 15000 1001
169.254.44.76:1580-169.254.44.76:15000
169.254.44.76:1581-169.254.44.76:15000
169.254.44.76:1582-169.254.44.76:15000
169.254.44.76:1583-169.254.44.76:15000
169.254.44.76:1584-169.254.44.76:15000
...[생략]...
169.254.44.76:1574-169.254.44.76:15000
169.254.44.76:1575-169.254.44.76:15000
169.254.44.76:1576-169.254.44.76:15000
169.254.44.76:1577-169.254.44.76:15000
169.254.44.76:1578-169.254.44.76:15000
970

// #2 클라이언트 측 - 로컬 IP 중의 하나인 192.168.100.80을 사용해 15001 포트로 1001개 접속 시도

d:\temp> ConsoleApp2.exe 192.168.100.80 15001 1001
192.168.100.80:1580-192.168.100.80:15001
192.168.100.80:1581-192.168.100.80:15001
192.168.100.80:1582-192.168.100.80:15001
192.168.100.80:1583-192.168.100.80:15001
192.168.100.80:1584-192.168.100.80:15001
...[생략]...
192.168.100.80:1575-192.168.100.80:15001
192.168.100.80:1576-192.168.100.80:15001
192.168.100.80:1577-192.168.100.80:15001
192.168.100.80:1578-192.168.100.80:15001
970

보는 바와 같이 동일한 포트를 사용하고 있지만 로컬 IP의 주소가 다르기 때문에 정상적으로 연결을 하고 있습니다.

(첨부 파일은 이 글의 예제 코드를 포함합니다.)




그래도 이번엔 SO_REUSEADDR보다는 다소 현실성이 있습니다. 왜냐하면 포트를 직접 지정하지 않고 0으로 선택해,

setsockopt(client.Handle, SocketOptionLevel.Socket, SO_PORT_SCALABILITY, ref trueValue, sizeof(int));
client.Bind(new IPEndPoint(IPAddress.Parse(ipAddr), 0));

시스템에 의해 자동으로 부여받을 수 있기 때문입니다.

그런데, 한가지 좀 불편한 것이 있습니다. 예제의 경우 localhost에 대해 테스트를 하고 있기 때문에 바인딩하는 IP가 어떤 거냐에 상관없이 localhost로는 연결이 되어야 하는데,

Socket client = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);

setsockopt(client.Handle, SocketOptionLevel.Socket, SO_PORT_SCALABILITY, ref trueValue, sizeof(int));
client.Bind(new IPEndPoint(IPAddress.Parse("169.254.44.76"), 0));
client.Connect("127.0.0.1", port);

실제로 해보면 Connect에서 이런 오류가 발생합니다.

d:\temp> ConsoleApp2 169.254.44.76 15000 1001 127.0.0.1
System.Net.Sockets.SocketException (0x80004005): The requested address is not valid in its context 127.0.0.1:15000
   at System.Net.Sockets.Socket.Connect(IPAddress[] addresses, Int32 port)
   at System.Net.Sockets.Socket.Connect(String host, Int32 port)
   at ConsoleApp2.Program.Main(String[] args) in C:\temp\ctest_tcp_server_client\ConsoleApp2\Program.cs:line 39

또한, 외부로 접속한다면 바인딩하는 IP에서 외부 IP로 라우팅이 되어야 합니다. 즉, "169.254.44.76"으로 바인딩한 후 (라우팅되지 않는*) "192.168.100.90"으로 접속을 하면,

Socket client = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);

setsockopt(client.Handle, SocketOptionLevel.Socket, SO_PORT_SCALABILITY, ref trueValue, sizeof(int));
client.Bind(new IPEndPoint(IPAddress.Parse("169.254.44.76"), 0));
client.Connect("192.168.100.90", port);

동일한 예외가 발생합니다.




이처럼 SO_PORT_SCALABILITY를 사용하면 (라우팅이 가능한 경우*) IP의 수만큼 dynamicport 영역의 배수로 접속을 할 수 있지만, 이것 역시 잘 제어된 환경에서 사용할 수 있기에 아쉬움이 남습니다.

사실 가장 좋은 것은, SO_REUSEADDR을 다음과 같은 식으로 사용할 수 있어야 하는데,

client.SetSocketOption(SocketOptionLevel.Socket, SocketOptionName.ReuseAddress, true);
client.Bind(new IPEndPoint(IPAddress.Any, 0));

이것이 지원되지 않아 ^^; 안타까울 뿐입니다.

(* 라우팅이 기준인지, 같은 네트워크여야 하는지에 대해서는 테스트가 필요합니다.)




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2021]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 91  92  93  94  95  96  97  98  99  100  101  102  103  104  [105]  ...
NoWriterDateCnt.TitleFile(s)
11346정성태10/25/201720216오류 유형: 423. Windows Server 2003 - The client-side extension could not remove user policy settings for 'Default Domain Policy {...}' (0x8007000d)
11338정성태10/25/201717554.NET Framework: 697. windbg - SOS DumpMT의 "BaseSize", "ComponentSize" 값에 대한 의미파일 다운로드1
11337정성태10/24/201720208.NET Framework: 696. windbg - SOS DumpClass/DumpMT의 "Vtable Slots", "Total Method Slots", "Slots in VTable" 값에 대한 의미파일 다운로드1
11336정성태10/20/201721632.NET Framework: 695. windbg - .NET string의 x86/x64 메모리 할당 구조
11335정성태10/18/201720351.NET Framework: 694. 닷넷 - <Module> 클래스의 용도
11334정성태10/18/201721054디버깅 기술: 105. windbg - k 명령어와 !clrstack을 조합한 호출 스택을 얻는 방법
11333정성태10/17/201720484오류 유형: 422. 윈도우 업데이트 - Code 9C48 Windows update encountered an unknown error.
11332정성태10/17/201721080디버깅 기술: 104. .NET Profiler + 디버거 연결 + .NET Exceptions = cpu high
11331정성태10/16/201719048디버깅 기술: 103. windbg - .NET 4.0 이상의 환경에서 모든 DLL에 대한 심벌 파일을 로드하는 파이썬 스크립트
11330정성태10/16/201718184디버깅 기술: 102. windbg - .NET 4.0 이상의 환경에서 DLL의 심벌 파일 로드 방법 [1]
11329정성태10/15/201723290.NET Framework: 693. C# - 오피스 엑셀 97-2003 .xls 파일에 대해 32비트/64비트 상관없이 접근 방법파일 다운로드1
11328정성태10/15/201726285.NET Framework: 692. C# - 하나의 바이너리로 환경에 맞게 32비트/64비트 EXE를 실행하는 방법파일 다운로드1
11327정성태10/15/201719939.NET Framework: 691. AssemblyName을 .csproj에서 바꾼 경우 빌드 오류 발생하는 문제파일 다운로드1
11326정성태10/15/201719930.NET Framework: 690. coreclr 소스코드로 알아보는 .NET 4.0의 모듈 로딩 함수 [1]
11325정성태10/14/201720595.NET Framework: 689. CLR 4.0 환경에서 DLL 모듈의 로드 주소(Base address) 알아내는 방법
11324정성태10/13/201722043디버깅 기술: 101. windbg - "*** WARNING: Unable to verify checksum for" 경고 없애는 방법
11322정성태10/13/201720477디버깅 기술: 100. windbg - .NET 4.0 응용 프로그램의 Main 메서드에 Breakpoint 걸기
11321정성태10/11/201721852.NET Framework: 688. NGen 모듈과 .NET Profiler
11320정성태10/11/201722708.NET Framework: 687. COR_PRF_USE_PROFILE_IMAGES 옵션과 NGen의 "profiler-enhanced images" [1]
11319정성태10/11/201730399.NET Framework: 686. C# - string 배열을 담은 구조체를 직렬화하는 방법
11318정성태10/7/201722308VS.NET IDE: 122. 비주얼 스튜디오에서 관리자 권한을 요구하는 C# 콘솔 프로그램 제작 [1]
11317정성태10/4/201727863VC++: 120. std::copy 등의 함수 사용 시 _SCL_SECURE_NO_WARNINGS 에러 발생
11316정성태9/30/201725266디버깅 기술: 99. (닷넷) 프로세스(EXE)에 디버거가 연결되어 있는지 아는 방법 [4]
11315정성태9/29/201741828기타: 68. "시작하세요! C# 6.0 프로그래밍: 기본 문법부터 실전 예제까지" 구매하신 분들을 위한 C# 7.0/7.1 추가 문법 PDF [8]
11314정성태9/28/201723459디버깅 기술: 98. windbg - 덤프 파일로부터 닷넷 버전 확인하는 방법
11313정성태9/25/201721529디버깅 기술: 97. windbg - 메모리 덤프로부터 DateTime 형식의 값을 알아내는 방법파일 다운로드1
... 91  92  93  94  95  96  97  98  99  100  101  102  103  104  [105]  ...