Microsoft MVP성태의 닷넷 이야기
Windows: 188. Windows - TCP default template 설정 방법 [링크 복사], [링크+제목 복사],
조회: 18411
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Windows - TCP default template 설정 방법

지난 글에서,

윈도우 환경에서 클라이언트 소켓의 최대 접속 수 (4) - ReuseUnicastPort를 이용한 포트 고갈 문제 해결
; https://www.sysnet.pe.kr/2/0/12435

AutoReusePortRangeStartPort / AutoReusePortRangeNumberOfPorts 값을 어떤 NetTcpSetting에서 바꿔야 할지 몰라 전체를 다 변경했었는데요. 보니까, netsh로 알아내는 방법이 있습니다. 가령, 제 컴퓨터(Windows 10)에서 다음과 같은 메시지가 확인됩니다.

c:\temp> netsh interface tcp show supplemental

The TCP global default template is internet

TCP Supplemental Parameters
----------------------------------------------
Minimum RTO (msec)                  : 300
...[생략]...

Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

c:\temp> netsh interface tcp show supplemental help

Usage: show supplemental [[template=]automatic|datacenter|internet|compat|custom]

       template  - One of the following values:
                   datacenter, automatic, compat, internet, internetcustom, datacentercustom.

Remarks: Shows TCP supplemental parameters that affect filtered connections.
         When no parameters are specified, the TCP default global template
         is shown. If the template= parameter is specified then the specified
         template is shown.

그렇습니다. InternetCustom, DatacenterCustom, Internet, Datacenter 중에 제 컴퓨터에서는 Internet 설정으로 맞춰져 있는 것입니다. 테스트를 위해 Azure에 생성해 둔 VM(Windows Server 2016)에서도 확인을 해보니 다음과 같이 나옵니다.

c:\temp> netsh interface tcp show supplemental

The TCP global default template is automatic


Automatic mode picks between Internet and Datacenter templates based on
TCP connection parameters.

Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

아하... 그러니까 RTT 상황에 따라 Internet과 Datacenter 설정을 자동으로 선택해 준다는 것입니다.




프로그래밍을 염두에 둔다면 netsh 명령어의 출력에 의존할 수는 없습니다. 다른 방법이 없을까 싶어 찾아봤더니 다음의 글에 PowerShell을 이용한 방법이 나옵니다.

How does Windows decide which setting/template (Internet vs Datacenter) is applied to TCP connections?
; https://stackoverflow.com/questions/34619815/how-does-windows-decide-which-setting-template-internet-vs-datacenter-is-appli

Get-NetTransportFilter 명령어를 제가 실습했던 Windows 10, Windows Server 2016에 대해 각각 실행해 보니 netsh의 출력과 동일한 결과를 얻을 수 있었습니다.

// Windows 10

PS C:\Users\testusr> Get-NetTransportFilter

SettingName       : Internet
Protocol          : TCP
LocalPortStart    : 0
LocalPortEnd      : 65535
RemotePortStart   : 0
RemotePortEnd     : 65535
DestinationPrefix : *

// Window Server 2016

PS C:\Users\testusr> Get-NetTransportFilter

SettingName       : Automatic
...[생략]...




당연히 이 값을 바꾸는 것도 가능할 텐데요, 이에 대한 것도 다음의 글에서 찾을 수 있었습니다.

Set-NetTCPSetting still incomplete code in windows 10?
; https://www.neowin.net/forum/topic/1271672-set-nettcpsetting-still-incomplete-code-in-windows-10/

그래서 netsh을 이용해 다음과 같이 제어할 수 있습니다.

// Windows Server 2016

C:\Users\testusr> netsh int tcp set supplemental template=Internet
Ok.

C:\Users\testusr> netsh interface tcp show supplemental

The TCP global default template is internet

TCP Supplemental Parameters
----------------------------------------------
...[생략]...
Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

C:\Users\testusr> netsh int tcp set supplemental template=automatic
Ok.

C:\Users\testusr> netsh interface tcp show supplemental

The TCP global default template is automatic

Automatic mode picks between Internet and Datacenter templates based on
TCP connection parameters.

Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

하지만 아쉽게도 클라이언트 운영체제에서는 이런 오류가 발생합니다.

C:\Users\testusr> netsh int tcp set supplemental template=automatic

Set supplemental command failed to set the global default template. The parameter is incorrect.

이런저런 면을 고려했을 때, 어쩌면 그냥 전체적으로 일괄 적용하는 것이 더 좋을 듯합니다. ^^




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 3/28/2021]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... [166]  167  168  169  170  171  172  173  174  175  176  177  178  179  180  ...
NoWriterDateCnt.TitleFile(s)
929정성태9/17/201025481웹: 15. IE 9 - 작업 표시줄의 웹 사이트 바로가기 사용자 정의 - JumpLists [3]파일 다운로드1
928정성태9/16/201029496VC++: 42. 쓰기 전용 파일(예: 로그 파일)의 동기화 방법파일 다운로드1
927정성태9/14/201039433VC++: 41. UTF-8 포맷의 INI 파일에 대한 GetPrivateProfile... API 사용 불가 [2]
926정성태9/9/201028728Team Foundation Server: 41. 빌드 스크립트에 Code Coverage 추가 [1]파일 다운로드1
925정성태9/8/201032548Team Foundation Server: 40. Visual Studio 2010 - Code Coverage 결과를 외부 XML 파일로 출력하는 명령행 도구 제작 [1]파일 다운로드1
924정성태9/6/201022766개발 환경 구성: 88. SCVMM이 설치된 도메인에 참여하지 않은 Hyper-V 호스트 추가
923정성태9/5/201028887오류 유형: 107. SCVMM Agent 설치 오류 - Failed to configure the WS-Management service.
922정성태9/4/201037601오류 유형: 106. Hyper-V 가상 머신의 네트워크 끊김 현상
921정성태9/2/201031470DDK: 2. Device Driver 응용 프로그램의 빌드 스크립트 [2]파일 다운로드1
920정성태9/1/201036131오류 유형: 105. WMI - The RPC server is unavailable [2]
919정성태8/30/201042326DDK: 1. Visual Studio 2010 - Device Driver 제작- Hello World 예제 [3]파일 다운로드1
918정성태8/28/201028219개발 환경 구성: 87. Hyper-V의 네트워크 유형 (3)
917정성태8/26/201023271개발 환경 구성: 86. "Routing and Remote Access"의 "Routing" 기능 활성화 방법
916정성태8/25/201022438개발 환경 구성: 85. 가상 네트워크에 LAN 어댑터 보이거나 감추는 방법
915정성태8/24/201040554개발 환경 구성: 84. Hyper-V의 네트워크 유형 (2)
913정성태8/22/201029729오류 유형: 104. Hyper-V 관리자 - VM 생성 오류 (VHD 생성 오류)
912정성태8/20/201031592.NET Framework: 183. 구조체 포인터 인자에 대한 P/Invoke 정의파일 다운로드1
911정성태8/19/201028641오류 유형: 103. System.Reflection.TargetException파일 다운로드1
910정성태8/19/201039539개발 환경 구성: 83. Hyper-V의 네트워크 유형 (1)
909정성태8/18/201034821오류 유형: 102. System.MissingMethodException
908정성태8/17/201025710개발 환경 구성: 82. Windows Virtual PC의 네트워크 유형 (3)
907정성태8/14/201023237개발 환경 구성: 81. Windows Virtual PC의 네트워크 유형 (2)
906정성태8/13/201031537개발 환경 구성: 80. Windows Virtual PC의 네트워크 유형 (1)
905정성태8/8/201034378Team Foundation Server: 39. 배치 파일로 팀 빌드 구성 [2]파일 다운로드1
904정성태8/8/201037025오류 유형: 101. SignTool Error: No certificates were found that met all the given criteria. [2]
903정성태8/6/201033921Team Foundation Server: 38. TFS 소스 코드 관리 기능 (4) - Branch
... [166]  167  168  169  170  171  172  173  174  175  176  177  178  179  180  ...