Microsoft MVP성태의 닷넷 이야기
Windows: 188. Windows - TCP default template 설정 방법 [링크 복사], [링크+제목 복사],
조회: 18359
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Windows - TCP default template 설정 방법

지난 글에서,

윈도우 환경에서 클라이언트 소켓의 최대 접속 수 (4) - ReuseUnicastPort를 이용한 포트 고갈 문제 해결
; https://www.sysnet.pe.kr/2/0/12435

AutoReusePortRangeStartPort / AutoReusePortRangeNumberOfPorts 값을 어떤 NetTcpSetting에서 바꿔야 할지 몰라 전체를 다 변경했었는데요. 보니까, netsh로 알아내는 방법이 있습니다. 가령, 제 컴퓨터(Windows 10)에서 다음과 같은 메시지가 확인됩니다.

c:\temp> netsh interface tcp show supplemental

The TCP global default template is internet

TCP Supplemental Parameters
----------------------------------------------
Minimum RTO (msec)                  : 300
...[생략]...

Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

c:\temp> netsh interface tcp show supplemental help

Usage: show supplemental [[template=]automatic|datacenter|internet|compat|custom]

       template  - One of the following values:
                   datacenter, automatic, compat, internet, internetcustom, datacentercustom.

Remarks: Shows TCP supplemental parameters that affect filtered connections.
         When no parameters are specified, the TCP default global template
         is shown. If the template= parameter is specified then the specified
         template is shown.

그렇습니다. InternetCustom, DatacenterCustom, Internet, Datacenter 중에 제 컴퓨터에서는 Internet 설정으로 맞춰져 있는 것입니다. 테스트를 위해 Azure에 생성해 둔 VM(Windows Server 2016)에서도 확인을 해보니 다음과 같이 나옵니다.

c:\temp> netsh interface tcp show supplemental

The TCP global default template is automatic


Automatic mode picks between Internet and Datacenter templates based on
TCP connection parameters.

Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

아하... 그러니까 RTT 상황에 따라 Internet과 Datacenter 설정을 자동으로 선택해 준다는 것입니다.




프로그래밍을 염두에 둔다면 netsh 명령어의 출력에 의존할 수는 없습니다. 다른 방법이 없을까 싶어 찾아봤더니 다음의 글에 PowerShell을 이용한 방법이 나옵니다.

How does Windows decide which setting/template (Internet vs Datacenter) is applied to TCP connections?
; https://stackoverflow.com/questions/34619815/how-does-windows-decide-which-setting-template-internet-vs-datacenter-is-appli

Get-NetTransportFilter 명령어를 제가 실습했던 Windows 10, Windows Server 2016에 대해 각각 실행해 보니 netsh의 출력과 동일한 결과를 얻을 수 있었습니다.

// Windows 10

PS C:\Users\testusr> Get-NetTransportFilter

SettingName       : Internet
Protocol          : TCP
LocalPortStart    : 0
LocalPortEnd      : 65535
RemotePortStart   : 0
RemotePortEnd     : 65535
DestinationPrefix : *

// Window Server 2016

PS C:\Users\testusr> Get-NetTransportFilter

SettingName       : Automatic
...[생략]...




당연히 이 값을 바꾸는 것도 가능할 텐데요, 이에 대한 것도 다음의 글에서 찾을 수 있었습니다.

Set-NetTCPSetting still incomplete code in windows 10?
; https://www.neowin.net/forum/topic/1271672-set-nettcpsetting-still-incomplete-code-in-windows-10/

그래서 netsh을 이용해 다음과 같이 제어할 수 있습니다.

// Windows Server 2016

C:\Users\testusr> netsh int tcp set supplemental template=Internet
Ok.

C:\Users\testusr> netsh interface tcp show supplemental

The TCP global default template is internet

TCP Supplemental Parameters
----------------------------------------------
...[생략]...
Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

C:\Users\testusr> netsh int tcp set supplemental template=automatic
Ok.

C:\Users\testusr> netsh interface tcp show supplemental

The TCP global default template is automatic

Automatic mode picks between Internet and Datacenter templates based on
TCP connection parameters.

Please use the 'netsh int tcp show supplementalports' and
'netsh int tcp show supplementalsubnets' commands to view active filters.

하지만 아쉽게도 클라이언트 운영체제에서는 이런 오류가 발생합니다.

C:\Users\testusr> netsh int tcp set supplemental template=automatic

Set supplemental command failed to set the global default template. The parameter is incorrect.

이런저런 면을 고려했을 때, 어쩌면 그냥 전체적으로 일괄 적용하는 것이 더 좋을 듯합니다. ^^




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 3/28/2021]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 166  167  168  169  [170]  171  172  173  174  175  176  177  178  179  180  ...
NoWriterDateCnt.TitleFile(s)
810정성태12/1/200936178.NET Framework: 168. [in,out] 배열을 C#에서 C/C++로 넘기는 방법 [3]
809정성태11/27/200925835오류 유형: 90. Method not found: 'Void System.Reflection.Emit.DynamicMethod..ctor(System.String, System.Type, System.Type[])'.
808정성태11/26/200934831VC++: 38. X64 빌드 오류: error LNK2001: unresolved external symbol [COMDLL]_ProxyFileInfo
807정성태11/23/200928674웹: 14. 로컬에 있는 HTML 페이지를 보호 모드에서 여는 방법
802정성태11/19/200930698.NET Framework: 167. 다른 스레드의 호출 스택 덤프 구하는 방법파일 다운로드1
801정성태11/18/200938151개발 환경 구성: 55. Hyper-V와 고성능 그래픽 카드의 성능 문제 해결 [1]
800정성태11/13/200931011VS.NET IDE: 66. 수동으로 구성해 본 VC++ 프로젝트 설정: ReleaseMinDependency
798정성태11/10/200929681개발 환경 구성: 54. .NET 개발자가 처음 설치해 본 TOMCAT [2]
797정성태11/9/200925896개발 환경 구성: 53. 물리 PC에 설치된 Windows 7을 Hyper-V로 이전하면?
796정성태11/2/200929957오류 유형: 89. Windows 7 백업 오류 - 0x80070057
795정성태11/2/200927112오류 유형: 88. TFS 2010 (beat2) 설치 오류 -TF255272
793정성태10/19/200929048.NET Framework: 166. WPF - XAML 요소의 네임스페이스와 CLR 타입 매핑
792정성태10/17/200929365웹: 13. IIS 7.5 에서 SQL Express 연결 시 오류
791정성태10/17/200933204웹: 12. 요청 페이지에 대해 빈 화면만 보이는 경우 [1]
789정성태10/13/200929092COM 개체 관련: 22. BB FlashBack SDK와 ActiveX 버전 관리 [7]
786정성태10/9/200925192개발 환경 구성: 52. 테스트를 위한 평가판 운영체제 구하기
785정성태10/8/200931727.NET Framework: 165. WPF - UI 업데이트를 바로 반영하고 싶다면? (2)파일 다운로드1
783정성태10/7/200929490.NET Framework: 164. WPF - 데이터 바인딩된 트리에서 부모 노드 찾는 방법 [1]파일 다운로드1
782정성태10/6/200931523개발 환경 구성: 51. Windows 7 - 다중 원격 접속(Remote Desktop) 허용
781정성태9/30/200928298.NET Framework: 163. WPF - TreeView 자동 스크롤 기능 해지 [2]파일 다운로드1
780정성태9/28/200932404Windows: 48. Windows 7/2008에서 ping을 위한 echo 요청 열기 [2]
779정성태9/24/200923746.NET Framework: 162. WPF - 중첩된 ScrollViewer의 크기 제어 - 두 번째 이야기파일 다운로드1
778정성태9/23/200925399오류 유형: 87. 시스템 시간 변경 후 Session이 맺어진 WCF 클라이언트의 예외 발생파일 다운로드1
776정성태9/17/200924427개발 환경 구성: 50. Reference assembly
775정성태9/13/200941136VC++: 37. XmlCodeGenerator를 C/C++ 코드 생성에 적용 [2]파일 다운로드1
773정성태9/5/200931810오류 유형 : 85. DEP 비호환 ActiveX 오류
... 166  167  168  169  [170]  171  172  173  174  175  176  177  178  179  180  ...