Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 4개 있습니다.)

C# - IPv4, IPv6를 모두 지원하는 서버 소켓 생성 방법

코드는 다음과 같이 간단합니다.

using (Socket sock = new Socket(SocketType.Stream, ProtocolType.Tcp))
{
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

보통 Socket 생성자에 AddressFamily를 함께 지정하는데요,

// IPv4
Socket sock = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);

// IPv6
Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);

(.NET 4.5부터 지원하는) 저걸 생략한 소켓 생성자의 경우,

public Socket(SocketType socketType, ProtocolType protocolType)
    : this(OSSupportsIPv6 ? AddressFamily.InterNetworkV6 : AddressFamily.InterNetwork, socketType, protocolType)
{
    if (OSSupportsIPv6)
    {
        DualMode = true;
    }
}

보는 바와 같이 운영체제가 IPv6를 지원하는 경우라면 기본적으로 InterNetworkV6로 초기화가 됩니다. 그러면서 동시에 (.NET 4.5부터 지원하는) DualMode 속성이 true로 바뀌는데요,

// NOTE: on *nix, the OS IP stack changes a dual-mode socket back to a
//       normal IPv6 socket once the socket is bound to an IPv6-specific
//       address. This can cause behavioral differences in code that checks
//       the value of DualMode (e.g. the checks in CanTryAddressFamily).
public bool DualMode
{
    get
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            return false;
        }
        return ((int)GetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only)! == 0);
    }
    set
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            throw new NotSupportedException(SR.net_invalidversion);
        }
        SetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only, value ? 0 : 1);
    }
}

즉, SocketOptionName.IPv6Only 옵션을 끄는 역할을 합니다. only 옵션을 껐다는 것은 IPv6/IPv4 듀얼 모드로 동작한다는 것을 의미합니다. 간단하죠? ^^ 따라서 위와 같이 소켓을 생성하는 것은 다음과 같이 바꿔서 표현할 수도 있습니다.

using (Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp))
{
    // Dual Mode Sockets – Never create an IPv4 Socket again
    // https://devblogs.microsoft.com/dotnet/dual-mode-sockets-never-create-an-ipv4-socket-again/
    sock.DualMode = true;
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

기왕이면 코드가 단순한 것이 좋으니 첫 번째 유형으로 쓰고, 단지 그것이 어떤 의미인지만 이 글을 통해 알아두시면 되겠습니다. ^^

참고로, DualMode는 Vista 이후의 운영체제에서만 지원됩니다. 만약 Vista 미만의 운영체제를 지원해야 한다면 IPv4, IPv6 소켓을 각각 생성해 바인딩시켜야 합니다.




IPv6 소켓을 사용하면서 주소는 IPv4를 지정하면,

Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
sock.Bind(new IPEndPoint(IPAddress.Any, 18000));

이런 오류가 발생합니다.

Unhandled exception. System.Net.Sockets.SocketException (10014): The system detected an invalid pointer address in attempting to use a pointer argument in a call.
   at System.Net.Sockets.Socket.UpdateStatusAfterSocketErrorAndThrowException(SocketError error, String callerName)
   at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Bind(EndPoint localEP)
   ...[생략]...




DualMode 속성을 지원하지 않는 .NET 4.5 미만에서는 이렇게!

Tired of creating sockets for each protocol, to make your application listen on all addresses for a given port?
; https://web.archive.org/web/20130909044601/http://blogs.msdn.com/b/malarch/archive/2005/11/18/494769.aspx

There is no more pain. Here is a cool new feature supported in Vista and Windows Server Longhorn. By just setting a socketoption, you will be able to use the same socket to accept connections from both ipv4 and ipv6 clients.

The following sample code shows how to configure the server socket.

static void Main(string[] args)
{
    Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
    sock.SetSocketOption(SocketOptionLevel.IPv6, (SocketOptionName)27, 0);
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 8000));
    sock.Listen(4);
    Socket client = sock.Accept();
    Console.WriteLine("Client has connected successfully with the server");
}

Create an IPv6 socket. Set the socket option IPV6_V6Only to false (by default it is true), to enable the socket to accept connections from ipv4 addresses too. Bind and Listen as usual. Now both ipv4 and ipv6 clients can connect to it
More info can be found in http://www.ietf.org/rfc/rfc3493.txt.

This is because Vista has a completely redesigned TCP/IP stack.

Whereas Windows XP and Win2k3 have a dual stack architecture, i.e., the Tcp, Udp layer is separate for both ipv4 and ipv6 protocols, Vista supports the dual IP layer architecture. That is, Only a single Tcp, Udp layer is present for both the ipv4 and ipv6 protocols.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 11/16/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 



2025-07-11 04시09분
eBPF Mystery: When is IPv4 not IPv4? When it's pretending to be IPv6!
; https://blog.gripdev.xyz/2025/05/06/ebpf-mystery-when-is-ipv4-not-ipv4-when-its-ipv6/

위의 글에서 .NET 5+의 IPv6/IPv4 Dual Mode에 대한 재미있는 시행 착오가 나옵니다.

즉, IPv6 지원을 끈 컴퓨터에서조차도 .NET 5+ 응용 프로그램의 Socket은 기본적으로 IPv6로 소켓을 다루고 있었고, 그것이 가능한 이유가 바로 Dual mode로 설정된 소켓이었기 때문이라고 합니다.

개인적으로는 Dual Mode라는 것이 내부적으로 IPv6 또는 IPv4 소켓으로 자동 생성되는 유형이라고 생각했는데, 그보다는 소켓 자원 자체는 IPv6로 고정인 상태에서 IPv4 통신을 지원하는 유형이었던 것입니다. (참고: RFC1933 - "https://datatracker.ietf.org/doc/html/rfc1933")
정성태

... [106]  107  108  109  110  111  112  113  114  115  116  117  118  119  120  ...
NoWriterDateCnt.TitleFile(s)
11372정성태11/25/201729284사물인터넷: 13. 윈도우즈 사용자를 위한 라즈베리 파이 제로 W 모델을 설정하는 방법 [4]
11371정성태11/25/201723137오류 유형: 432. Hyper-V 가상 스위치 생성 시 Failed to connect Ethernet switch port 0x80070002 오류 발생
11370정성태11/25/201723745오류 유형: 431. Hyper-V의 Virtual Switch 생성 시 "External network" 목록에 특정 네트워크 어댑터 항목이 없는 경우
11369정성태11/25/201725065사물인터넷: 12. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 키보드 및 마우스로 쓰는 방법 (절대 좌표, 상대 좌표, 휠) [1]
11368정성태11/25/201730055.NET Framework: 699. UDP 브로드캐스트 주소 255.255.255.255와 192.168.0.255의 차이점과 이를 고려한 C# UDP 서버/클라이언트 예제 [2]파일 다운로드1
11367정성태11/25/201730965개발 환경 구성: 337. 윈도우 운영체제의 route 명령어 사용법
11366정성태11/25/201723175오류 유형: 430. 이벤트 로그 - Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
11365정성태11/25/201723518오류 유형: 429. 이벤트 로그 - User Policy could not be updated successfully
11364정성태11/24/201727521사물인터넷: 11. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 마우스로 쓰는 방법 (절대 좌표) [2]
11363정성태11/23/201727791사물인터넷: 10. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 마우스 + 키보드로 쓰는 방법 (두 번째 이야기)
11362정성태11/22/201722310오류 유형: 428. 윈도우 업데이트 KB4048953 - 0x800705b4 [2]
11361정성태11/22/201725391오류 유형: 427. 이벤트 로그 - Filter Manager failed to attach to volume '\Device\HarddiskVolume??' 0xC03A001C
11360정성태11/22/201726525오류 유형: 426. 이벤트 로그 - The kernel power manager has initiated a shutdown transition.
11359정성태11/16/201725401오류 유형: 425. 윈도우 10 Version 1709 (OS Build 16299.64) 업그레이드 시 발생한 문제 2가지
11358정성태11/15/201731021사물인터넷: 9. Visual Studio 2017에서 Raspberry Pi C++ 응용 프로그램 제작 [1]
11357정성태11/15/201731423개발 환경 구성: 336. 윈도우 10 Bash 쉘에서 C++ 컴파일하는 방법
11356정성태11/15/201733169사물인터넷: 8. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 마우스 + 키보드로 쓰는 방법 [4]
11355정성태11/15/201727015사물인터넷: 7. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 마우스로 쓰는 방법 [2]파일 다운로드2
11354정성태11/14/201732873사물인터넷: 6. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 키보드로 쓰는 방법 [8]
11353정성태11/14/201729399사물인터넷: 5. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 이더넷 카드로 쓰는 방법 [1]
11352정성태11/14/201726300사물인터넷: 4. Samba를 이용해 윈도우와 Raspberry Pi간의 파일 교환 [1]
11351정성태11/7/201728414.NET Framework: 698. C# 컴파일러 대신 직접 구현하는 비동기(async/await) 코드 [6]파일 다운로드1
11350정성태11/1/201724978디버깅 기술: 108. windbg 분석 사례 - Redis 서버로의 호출을 기다리면서 hang 현상 발생
11349정성태10/31/201725856디버깅 기술: 107. windbg - x64 SOS 확장의 !clrstack 명령어가 출력하는 Child SP 값의 의미 [1]파일 다운로드1
11348정성태10/31/201721377디버깅 기술: 106. windbg - x64 역어셈블 코드에서 닷넷 메서드 호출의 인자를 확인하는 방법
11347정성태10/28/201725567오류 유형: 424. Visual Studio - "클래스 다이어그램 보기" 시 "작업을 완료할 수 없습니다. 해당 인터페이스를 지원하지 않습니다." 오류 발생
... [106]  107  108  109  110  111  112  113  114  115  116  117  118  119  120  ...