Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 4개 있습니다.)

C# - IPv4, IPv6를 모두 지원하는 서버 소켓 생성 방법

코드는 다음과 같이 간단합니다.

using (Socket sock = new Socket(SocketType.Stream, ProtocolType.Tcp))
{
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

보통 Socket 생성자에 AddressFamily를 함께 지정하는데요,

// IPv4
Socket sock = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);

// IPv6
Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);

(.NET 4.5부터 지원하는) 저걸 생략한 소켓 생성자의 경우,

public Socket(SocketType socketType, ProtocolType protocolType)
    : this(OSSupportsIPv6 ? AddressFamily.InterNetworkV6 : AddressFamily.InterNetwork, socketType, protocolType)
{
    if (OSSupportsIPv6)
    {
        DualMode = true;
    }
}

보는 바와 같이 운영체제가 IPv6를 지원하는 경우라면 기본적으로 InterNetworkV6로 초기화가 됩니다. 그러면서 동시에 (.NET 4.5부터 지원하는) DualMode 속성이 true로 바뀌는데요,

// NOTE: on *nix, the OS IP stack changes a dual-mode socket back to a
//       normal IPv6 socket once the socket is bound to an IPv6-specific
//       address. This can cause behavioral differences in code that checks
//       the value of DualMode (e.g. the checks in CanTryAddressFamily).
public bool DualMode
{
    get
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            return false;
        }
        return ((int)GetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only)! == 0);
    }
    set
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            throw new NotSupportedException(SR.net_invalidversion);
        }
        SetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only, value ? 0 : 1);
    }
}

즉, SocketOptionName.IPv6Only 옵션을 끄는 역할을 합니다. only 옵션을 껐다는 것은 IPv6/IPv4 듀얼 모드로 동작한다는 것을 의미합니다. 간단하죠? ^^ 따라서 위와 같이 소켓을 생성하는 것은 다음과 같이 바꿔서 표현할 수도 있습니다.

using (Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp))
{
    // Dual Mode Sockets – Never create an IPv4 Socket again
    // https://devblogs.microsoft.com/dotnet/dual-mode-sockets-never-create-an-ipv4-socket-again/
    sock.DualMode = true;
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

기왕이면 코드가 단순한 것이 좋으니 첫 번째 유형으로 쓰고, 단지 그것이 어떤 의미인지만 이 글을 통해 알아두시면 되겠습니다. ^^

참고로, DualMode는 Vista 이후의 운영체제에서만 지원됩니다. 만약 Vista 미만의 운영체제를 지원해야 한다면 IPv4, IPv6 소켓을 각각 생성해 바인딩시켜야 합니다.




IPv6 소켓을 사용하면서 주소는 IPv4를 지정하면,

Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
sock.Bind(new IPEndPoint(IPAddress.Any, 18000));

이런 오류가 발생합니다.

Unhandled exception. System.Net.Sockets.SocketException (10014): The system detected an invalid pointer address in attempting to use a pointer argument in a call.
   at System.Net.Sockets.Socket.UpdateStatusAfterSocketErrorAndThrowException(SocketError error, String callerName)
   at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Bind(EndPoint localEP)
   ...[생략]...




DualMode 속성을 지원하지 않는 .NET 4.5 미만에서는 이렇게!

Tired of creating sockets for each protocol, to make your application listen on all addresses for a given port?
; https://web.archive.org/web/20130909044601/http://blogs.msdn.com/b/malarch/archive/2005/11/18/494769.aspx

There is no more pain. Here is a cool new feature supported in Vista and Windows Server Longhorn. By just setting a socketoption, you will be able to use the same socket to accept connections from both ipv4 and ipv6 clients.

The following sample code shows how to configure the server socket.

static void Main(string[] args)
{
    Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
    sock.SetSocketOption(SocketOptionLevel.IPv6, (SocketOptionName)27, 0);
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 8000));
    sock.Listen(4);
    Socket client = sock.Accept();
    Console.WriteLine("Client has connected successfully with the server");
}

Create an IPv6 socket. Set the socket option IPV6_V6Only to false (by default it is true), to enable the socket to accept connections from ipv4 addresses too. Bind and Listen as usual. Now both ipv4 and ipv6 clients can connect to it
More info can be found in http://www.ietf.org/rfc/rfc3493.txt.

This is because Vista has a completely redesigned TCP/IP stack.

Whereas Windows XP and Win2k3 have a dual stack architecture, i.e., the Tcp, Udp layer is separate for both ipv4 and ipv6 protocols, Vista supports the dual IP layer architecture. That is, Only a single Tcp, Udp layer is present for both the ipv4 and ipv6 protocols.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 11/16/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 



2025-07-11 04시09분
eBPF Mystery: When is IPv4 not IPv4? When it's pretending to be IPv6!
; https://blog.gripdev.xyz/2025/05/06/ebpf-mystery-when-is-ipv4-not-ipv4-when-its-ipv6/

위의 글에서 .NET 5+의 IPv6/IPv4 Dual Mode에 대한 재미있는 시행 착오가 나옵니다.

즉, IPv6 지원을 끈 컴퓨터에서조차도 .NET 5+ 응용 프로그램의 Socket은 기본적으로 IPv6로 소켓을 다루고 있었고, 그것이 가능한 이유가 바로 Dual mode로 설정된 소켓이었기 때문이라고 합니다.

개인적으로는 Dual Mode라는 것이 내부적으로 IPv6 또는 IPv4 소켓으로 자동 생성되는 유형이라고 생각했는데, 그보다는 소켓 자원 자체는 IPv6로 고정인 상태에서 IPv4 통신을 지원하는 유형이었던 것입니다. (참고: RFC1933 - "https://datatracker.ietf.org/doc/html/rfc1933")
정성태

... 106  107  [108]  109  110  111  112  113  114  115  116  117  118  119  120  ...
NoWriterDateCnt.TitleFile(s)
11266정성태8/10/201726836.NET Framework: 671. C# 6.0 이상의 소스 코드를 Visual Studio 설치 없이 명령행에서 컴파일하는 방법
11265정성태8/10/201754616기타: 66. 도서: 시작하세요! C# 7.1 프로그래밍: 기본 문법부터 실전 예제까지 [11]
11264정성태8/9/201726220오류 유형: 414. UWP app을 signtool.exe로 서명 시 0x8007000b 오류 발생
11263정성태8/9/201721523오류 유형: 413. The C# project "..." is targeting ".NETFramework, Version=v4.0", which is not installed on this machine. [3]
11262정성태8/5/201720046오류 유형: 412. windbg - SOS does not support the current target architecture. [3]
11261정성태8/4/201722312디버깅 기술: 91. windbg - 풀 덤프 파일로부터 강력한 이름의 어셈블리 추출 후 사용하는 방법
11260정성태8/3/201720966.NET Framework: 670. C# - 실행 파일로부터 공개키를 추출하는 방법
11259정성태8/2/201719327.NET Framework: 669. 지연 서명된 어셈블리를 sn.exe -Vr 등록 없이 사용하는 방법
11258정성태8/1/201720669.NET Framework: 668. 지연 서명된 DLL과 서명된 DLL의 차이점파일 다운로드1
11257정성태7/31/201720290.NET Framework: 667. bypassTrustedAppStrongNames 옵션 설명파일 다운로드1
11256정성태7/25/201722162디버깅 기술: 90. windbg의 lm 명령으로 보이지 않는 .NET 4.0 ClassLibrary를 명시적으로 로드하는 방법 [1]
11255정성태7/18/201724838디버깅 기술: 89. Win32 Debug CRT Heap Internals의 0xBAADF00D 표시 재현 [1]파일 다운로드3
11254정성태7/17/201721153개발 환경 구성: 322. "Visual Studio Emulator for Android" 에뮬레이터를 "Android Studio"와 함께 쓰는 방법
11253정성태7/17/201722000Math: 21. "Coding the Matrix" 문제 2.5.1 풀이 [1]파일 다운로드1
11252정성태7/13/201719518오류 유형: 411. RTVS 또는 PTVS 실행 시 Could not load type 'Microsoft.VisualStudio.InteractiveWindow.Shell.IVsInteractiveWindowFactory2'
11251정성태7/13/201719221디버깅 기술: 88. windbg 분석 - webengine4.dll의 MgdExplicitFlush에서 발생한 System.AccessViolationException의 crash 문제 (2)
11250정성태7/13/201722968디버깅 기술: 87. windbg 분석 - webengine4.dll의 MgdExplicitFlush에서 발생한 System.AccessViolationException의 crash 문제 [1]
11249정성태7/12/201720485오류 유형: 410. LoadLibrary("[...].dll") failed - The specified procedure could not be found.
11248정성태7/12/201727024오류 유형: 409. pip install pefile - 'cp949' codec can't decode byte 0xe2 in position 208687: illegal multibyte sequence
11247정성태7/12/201721325오류 유형: 408. SqlConnection 객체 생성 시 무한 대기 문제파일 다운로드1
11246정성태7/11/201719135VS.NET IDE: 118. Visual Studio - 다중 폴더에 포함된 파일들에 대한 "Copy to Output Directory"를 한 번에 설정하는 방법
11245정성태7/10/201724957개발 환경 구성: 321. Visual Studio Emulator for Android 소개 [2]
11244정성태7/10/201725471오류 유형: 407. Visual Studio에서 ASP.NET Core 실행할 때 dotnet.exe 프로세스의 -532462766 오류 발생 [1]
11243정성태7/10/201722265.NET Framework: 666. dotnet.exe - 윈도우 운영체제에서의 .NET Core 버전 찾기 규칙
11242정성태7/8/201721496제니퍼 .NET: 27. 제니퍼 닷넷 적용 사례 (7) - 노후된 스토리지 장비로 인한 웹 서비스 Hang (멈춤) 현상
11241정성태7/8/201720063오류 유형: 406. Xamarin 빌드 에러 XA5209, APT0000
... 106  107  [108]  109  110  111  112  113  114  115  116  117  118  119  120  ...