Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 4개 있습니다.)

C# - IPv4, IPv6를 모두 지원하는 서버 소켓 생성 방법

코드는 다음과 같이 간단합니다.

using (Socket sock = new Socket(SocketType.Stream, ProtocolType.Tcp))
{
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

보통 Socket 생성자에 AddressFamily를 함께 지정하는데요,

// IPv4
Socket sock = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);

// IPv6
Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);

(.NET 4.5부터 지원하는) 저걸 생략한 소켓 생성자의 경우,

public Socket(SocketType socketType, ProtocolType protocolType)
    : this(OSSupportsIPv6 ? AddressFamily.InterNetworkV6 : AddressFamily.InterNetwork, socketType, protocolType)
{
    if (OSSupportsIPv6)
    {
        DualMode = true;
    }
}

보는 바와 같이 운영체제가 IPv6를 지원하는 경우라면 기본적으로 InterNetworkV6로 초기화가 됩니다. 그러면서 동시에 (.NET 4.5부터 지원하는) DualMode 속성이 true로 바뀌는데요,

// NOTE: on *nix, the OS IP stack changes a dual-mode socket back to a
//       normal IPv6 socket once the socket is bound to an IPv6-specific
//       address. This can cause behavioral differences in code that checks
//       the value of DualMode (e.g. the checks in CanTryAddressFamily).
public bool DualMode
{
    get
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            return false;
        }
        return ((int)GetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only)! == 0);
    }
    set
    {
        if (AddressFamily != AddressFamily.InterNetworkV6)
        {
            throw new NotSupportedException(SR.net_invalidversion);
        }
        SetSocketOption(SocketOptionLevel.IPv6, SocketOptionName.IPv6Only, value ? 0 : 1);
    }
}

즉, SocketOptionName.IPv6Only 옵션을 끄는 역할을 합니다. only 옵션을 껐다는 것은 IPv6/IPv4 듀얼 모드로 동작한다는 것을 의미합니다. 간단하죠? ^^ 따라서 위와 같이 소켓을 생성하는 것은 다음과 같이 바꿔서 표현할 수도 있습니다.

using (Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp))
{
    // Dual Mode Sockets – Never create an IPv4 Socket again
    // https://devblogs.microsoft.com/dotnet/dual-mode-sockets-never-create-an-ipv4-socket-again/
    sock.DualMode = true;
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 9982));

    // ...[생략]...
}

기왕이면 코드가 단순한 것이 좋으니 첫 번째 유형으로 쓰고, 단지 그것이 어떤 의미인지만 이 글을 통해 알아두시면 되겠습니다. ^^

참고로, DualMode는 Vista 이후의 운영체제에서만 지원됩니다. 만약 Vista 미만의 운영체제를 지원해야 한다면 IPv4, IPv6 소켓을 각각 생성해 바인딩시켜야 합니다.




IPv6 소켓을 사용하면서 주소는 IPv4를 지정하면,

Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
sock.Bind(new IPEndPoint(IPAddress.Any, 18000));

이런 오류가 발생합니다.

Unhandled exception. System.Net.Sockets.SocketException (10014): The system detected an invalid pointer address in attempting to use a pointer argument in a call.
   at System.Net.Sockets.Socket.UpdateStatusAfterSocketErrorAndThrowException(SocketError error, String callerName)
   at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Bind(EndPoint localEP)
   ...[생략]...




DualMode 속성을 지원하지 않는 .NET 4.5 미만에서는 이렇게!

Tired of creating sockets for each protocol, to make your application listen on all addresses for a given port?
; https://web.archive.org/web/20130909044601/http://blogs.msdn.com/b/malarch/archive/2005/11/18/494769.aspx

There is no more pain. Here is a cool new feature supported in Vista and Windows Server Longhorn. By just setting a socketoption, you will be able to use the same socket to accept connections from both ipv4 and ipv6 clients.

The following sample code shows how to configure the server socket.

static void Main(string[] args)
{
    Socket sock = new Socket(AddressFamily.InterNetworkV6, SocketType.Stream, ProtocolType.Tcp);
    sock.SetSocketOption(SocketOptionLevel.IPv6, (SocketOptionName)27, 0);
    sock.Bind(new IPEndPoint(IPAddress.IPv6Any, 8000));
    sock.Listen(4);
    Socket client = sock.Accept();
    Console.WriteLine("Client has connected successfully with the server");
}

Create an IPv6 socket. Set the socket option IPV6_V6Only to false (by default it is true), to enable the socket to accept connections from ipv4 addresses too. Bind and Listen as usual. Now both ipv4 and ipv6 clients can connect to it
More info can be found in http://www.ietf.org/rfc/rfc3493.txt.

This is because Vista has a completely redesigned TCP/IP stack.

Whereas Windows XP and Win2k3 have a dual stack architecture, i.e., the Tcp, Udp layer is separate for both ipv4 and ipv6 protocols, Vista supports the dual IP layer architecture. That is, Only a single Tcp, Udp layer is present for both the ipv4 and ipv6 protocols.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 11/16/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 



2025-07-11 04시09분
eBPF Mystery: When is IPv4 not IPv4? When it's pretending to be IPv6!
; https://blog.gripdev.xyz/2025/05/06/ebpf-mystery-when-is-ipv4-not-ipv4-when-its-ipv6/

위의 글에서 .NET 5+의 IPv6/IPv4 Dual Mode에 대한 재미있는 시행 착오가 나옵니다.

즉, IPv6 지원을 끈 컴퓨터에서조차도 .NET 5+ 응용 프로그램의 Socket은 기본적으로 IPv6로 소켓을 다루고 있었고, 그것이 가능한 이유가 바로 Dual mode로 설정된 소켓이었기 때문이라고 합니다.

개인적으로는 Dual Mode라는 것이 내부적으로 IPv6 또는 IPv4 소켓으로 자동 생성되는 유형이라고 생각했는데, 그보다는 소켓 자원 자체는 IPv6로 고정인 상태에서 IPv4 통신을 지원하는 유형이었던 것입니다. (참고: RFC1933 - "https://datatracker.ietf.org/doc/html/rfc1933")
정성태

... [91]  92  93  94  95  96  97  98  99  100  101  102  103  104  105  ...
NoWriterDateCnt.TitleFile(s)
11709정성태9/30/201822425개발 환경 구성: 402. .NET Core 콘솔 응용 프로그램을 docker로 실행/디버깅하는 방법 [1]
11708정성태9/30/201825248개발 환경 구성: 401. .NET Core 콘솔 응용 프로그램을 배포(publish) 시 docker image 자동 생성 [2]파일 다운로드1
11707정성태9/30/201826611오류 유형: 489. ASP.NET Core를 docker에서 실행 시 "Failed with a critical error." 오류 발생 [1]
11706정성태9/29/201821682개발 환경 구성: 400. Synology NAS(DS216+II)에서 실행한 gcc의 Segmentation fault [2]
11705정성태9/29/201822334개발 환경 구성: 399. Synology NAS(DS216+II)에 gcc 컴파일러 설치
11704정성태9/29/201827318기타: 73. Synology NAS 신호음(beep) 끄기 [1]파일 다운로드1
11703정성태9/27/201820890개발 환경 구성: 398. Blazor 환경 구성 후 빌드 속도가 너무 느리다면? [2]
11702정성태9/26/201818540사물인터넷: 44. 넷두이노(Netduino)의 네트워크 설정 방법
11701정성태9/26/201824325개발 환경 구성: 397. 공유기를 일반 허브로 활용하는 방법파일 다운로드1
11700정성태9/21/201823265Graphics: 25. Unity - shader의 직교 투영(Orthographic projection) 행렬(UNITY_MATRIX_P)을 수작업으로 구성
11699정성태9/21/201821826오류 유형: 488. Add-AzureAccount 실행 시 "No subscriptions are associated with the logged in account in Azure Service Management (RDFE)." 오류
11698정성태9/21/201823075오류 유형: 487. 윈도우 성능 데이터를 원격 SQL에 저장하는 경우 "Call to SQLAllocConnect failed with %1." 오류 발생
11697정성태9/20/201820576Graphics: 24. Unity - unity_CameraWorldClipPlanes 내장 변수 의미
11696정성태9/19/201822668.NET Framework: 793. C# - REST API를 이용해 NuGet 저장소 제어파일 다운로드1
11695정성태9/19/201827956Graphics: 23. Unity - shader의 원근 투영(Perspective projection) 행렬(UNITY_MATRIX_P)을 수작업으로 구성
11694정성태9/17/201821974오류 유형: 486. nuget push 호출 시 405 Method Not Allowed 오류 발생
11693정성태9/16/201824037VS.NET IDE: 128. Unity - shader 코드 디버깅 방법
11692정성태9/13/201824834Graphics: 22. Unity - shader의 Camera matrix(UNITY_MATRIX_V)를 수작업으로 구성
11691정성태9/13/201821359VS.NET IDE: 127. Visual C++ / x64 환경에서 inline-assembly를 매크로 어셈블리로 대체하는 방법 - 두 번째 이야기
11690정성태9/13/201824834사물인터넷: 43. 555 타이머의 단안정 모드파일 다운로드1
11689정성태9/13/201823882VS.NET IDE: 126. 디컴파일된 소스에 탐색을 사용하도록 설정(Enable navigation to decompiled sources)
11688정성태9/11/201818779오류 유형: 485. iisreset - The data is invalid. (2147942413, 8007000d) 오류 발생
11687정성태9/11/201822161사물인터넷: 42. 사물인터넷 - 트랜지스터 다중 전압 테스트파일 다운로드1
11686정성태9/8/201821113사물인터넷: 41. 다중 전원의 소스를 가진 회로파일 다운로드1
11685정성태9/6/201820842사물인터넷: 40. 이어폰 소리를 capacitor로 필터링파일 다운로드1
11684정성태9/6/201823443개발 환경 구성: 396. pagefile.sys를 비활성화시켰는데도 working set 메모리가 줄어드는 이유파일 다운로드1
... [91]  92  93  94  95  96  97  98  99  100  101  102  103  104  105  ...