Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 106  [107]  108  109  110  111  112  113  114  115  116  117  118  119  120  ...
NoWriterDateCnt.TitleFile(s)
11347정성태10/28/201725503오류 유형: 424. Visual Studio - "클래스 다이어그램 보기" 시 "작업을 완료할 수 없습니다. 해당 인터페이스를 지원하지 않습니다." 오류 발생
11346정성태10/25/201722112오류 유형: 423. Windows Server 2003 - The client-side extension could not remove user policy settings for 'Default Domain Policy {...}' (0x8007000d)
11338정성태10/25/201718595.NET Framework: 697. windbg - SOS DumpMT의 "BaseSize", "ComponentSize" 값에 대한 의미파일 다운로드1
11337정성태10/24/201722034.NET Framework: 696. windbg - SOS DumpClass/DumpMT의 "Vtable Slots", "Total Method Slots", "Slots in VTable" 값에 대한 의미파일 다운로드1
11336정성태10/20/201723849.NET Framework: 695. windbg - .NET string의 x86/x64 메모리 할당 구조
11335정성태10/18/201722359.NET Framework: 694. 닷넷 - <Module> 클래스의 용도
11334정성태10/18/201722709디버깅 기술: 105. windbg - k 명령어와 !clrstack을 조합한 호출 스택을 얻는 방법
11333정성태10/17/201722191오류 유형: 422. 윈도우 업데이트 - Code 9C48 Windows update encountered an unknown error.
11332정성태10/17/201722531디버깅 기술: 104. .NET Profiler + 디버거 연결 + .NET Exceptions = cpu high
11331정성태10/16/201720478디버깅 기술: 103. windbg - .NET 4.0 이상의 환경에서 모든 DLL에 대한 심벌 파일을 로드하는 파이썬 스크립트
11330정성태10/16/201719280디버깅 기술: 102. windbg - .NET 4.0 이상의 환경에서 DLL의 심벌 파일 로드 방법 [1]
11329정성태10/15/201725088.NET Framework: 693. C# - 오피스 엑셀 97-2003 .xls 파일에 대해 32비트/64비트 상관없이 접근 방법파일 다운로드1
11328정성태10/15/201728284.NET Framework: 692. C# - 하나의 바이너리로 환경에 맞게 32비트/64비트 EXE를 실행하는 방법파일 다운로드1
11327정성태10/15/201721918.NET Framework: 691. AssemblyName을 .csproj에서 바꾼 경우 빌드 오류 발생하는 문제파일 다운로드1
11326정성태10/15/201721316.NET Framework: 690. coreclr 소스코드로 알아보는 .NET 4.0의 모듈 로딩 함수 [1]
11325정성태10/14/201721983.NET Framework: 689. CLR 4.0 환경에서 DLL 모듈의 로드 주소(Base address) 알아내는 방법
11324정성태10/13/201723480디버깅 기술: 101. windbg - "*** WARNING: Unable to verify checksum for" 경고 없애는 방법
11322정성태10/13/201722523디버깅 기술: 100. windbg - .NET 4.0 응용 프로그램의 Main 메서드에 Breakpoint 걸기
11321정성태10/11/201723743.NET Framework: 688. NGen 모듈과 .NET Profiler
11320정성태10/11/201724864.NET Framework: 687. COR_PRF_USE_PROFILE_IMAGES 옵션과 NGen의 "profiler-enhanced images" [1]
11319정성태10/11/201732403.NET Framework: 686. C# - string 배열을 담은 구조체를 직렬화하는 방법
11318정성태10/7/201723715VS.NET IDE: 122. 비주얼 스튜디오에서 관리자 권한을 요구하는 C# 콘솔 프로그램 제작 [1]
11317정성태10/4/201729478VC++: 120. std::copy 등의 함수 사용 시 _SCL_SECURE_NO_WARNINGS 에러 발생
11316정성태9/30/201726533디버깅 기술: 99. (닷넷) 프로세스(EXE)에 디버거가 연결되어 있는지 아는 방법 [4]
11315정성태9/29/201743751기타: 68. "시작하세요! C# 6.0 프로그래밍: 기본 문법부터 실전 예제까지" 구매하신 분들을 위한 C# 7.0/7.1 추가 문법 PDF [8]
11314정성태9/28/201724871디버깅 기술: 98. windbg - 덤프 파일로부터 닷넷 버전 확인하는 방법
... 106  [107]  108  109  110  111  112  113  114  115  116  117  118  119  120  ...