Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 106  107  108  [109]  110  111  112  113  114  115  116  117  118  119  120  ...
NoWriterDateCnt.TitleFile(s)
11233정성태6/28/201718778오류 유형: 403. SharePoint Server 2013을 Windows Server 2016에 설치할 때 .NET 4.5 설치 오류 발생
11232정성태6/28/201719663Windows: 144. Windows Server 2016에 Windows Identity Extensions을 설치하는 방법
11231정성태6/28/201719537디버깅 기술: 86. windbg의 mscordacwks DLL 로드 문제 - 세 번째 이야기 [1]
11230정성태6/28/201718972제니퍼 .NET: 26. 제니퍼 닷넷 적용 사례 (6) - 잦은 Recycle 문제
11229정성태6/27/201720390오류 유형: 402. Windows Server Backup 관리 콘솔이 없어진 경우
11228정성태6/26/201717496개발 환경 구성: 320. Visual Basic .NET 프로젝트에서 내장 Manifest 자원을 EXE 파일로부터 제거하는 방법파일 다운로드1
11227정성태6/19/201725979개발 환경 구성: 319. windbg에서 python 스크립트 실행하는 방법 - pykd [6]
11226정성태6/19/201717041오류 유형: 401. Microsoft Edge를 실행했는데 입력 반응이 없는 경우
11225정성태6/19/201716302오류 유형: 400. Outlook - The required file ExSec32.dll cannot be found in your path. Install Microsoft Outlook again.
11224정성태6/13/201718805.NET Framework: 661. Json.NET의 DeserializeObject 수행 시 속성 이름을 동적으로 바꾸는 방법파일 다운로드1
11223정성태6/12/201717722개발 환경 구성: 318. WCF Service Application과 WCFTestClient.exe
11222정성태6/10/201721905오류 유형: 399. WCF - A property with the name 'UriTemplateMatchResults' already exists.파일 다운로드1
11221정성태6/10/201718982오류 유형: 398. Fakes - Assembly 'Jennifer5.Fakes' with identity '[...].Fakes, [...]' uses '[...]' which has a higher version than referenced assembly '[...]' with identity '[...]'
11220정성태6/10/201723766.NET Framework: 660. Shallow Copy와 Deep Copy [1]파일 다운로드2
11219정성태6/7/201718860.NET Framework: 659. 닷넷 - TypeForwardedFrom / TypeForwardedTo 특성의 사용법
11218정성태6/1/201721781개발 환경 구성: 317. Hyper-V 내의 VM에서 다시 Hyper-V를 설치: Nested Virtualization
11217정성태6/1/201717931오류 유형: 397. initerrlog: Could not open error log file 'C:\...\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'
11216정성태6/1/201719650오류 유형: 396. Activation context generation failed
11215정성태6/1/201721354오류 유형: 395. 관리 콘솔을 실행하면 "This app has been blocked for your protection" 오류 발생 [1]
11214정성태6/1/201718724오류 유형: 394. MSDTC 서비스 시작 시 -1073737712(0xC0001010) 오류와 함께 종료되는 문제 [1]
11213정성태5/26/201724077오류 유형: 393. TFS - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
11212정성태5/26/201723343오류 유형: 392. Windows Server 2016에 KB4019472 업데이트가 실패하는 경우
11211정성태5/26/201722199오류 유형: 391. BeginInvoke에 전달한 람다 함수에 CS1660 에러가 발생하는 경우
11210정성태5/25/201722511기타: 65. ActiveX 없는 전자 메일에 사용된 "개인정보 보호를 위해 암호화된 보안메일"의 암호화 방법
11209정성태5/25/201770129Windows: 143. Windows 10의 Recovery 파티션을 삭제 및 새로 생성하는 방법 [16]
11208정성태5/25/201728879오류 유형: 390. diskpart의 set id 명령어에서 "The specified type is not in the correct format." 오류 발생
... 106  107  108  [109]  110  111  112  113  114  115  116  117  118  119  120  ...