Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 151  152  153  154  155  156  157  158  159  160  [161]  162  163  164  165  ...
NoWriterDateCnt.TitleFile(s)
1023정성태4/20/201130079.NET Framework: 210. Windbg 환경에서 확인해 본 .NET 메서드 JIT 컴파일 전과 후 [1]
1022정성태4/19/201125633디버깅 기술: 38. .NET Disassembly 창에서의 F11(Step-into) 키 동작파일 다운로드1
1021정성태4/18/201127953디버깅 기술: 37. .NET 4.0 응용 프로그램의 Main 함수에 BreakPoint 걸기
1020정성태4/18/201128600오류 유형: 117. Failed to find runtime DLL (mscorwks.dll), 0x80004005
1019정성태4/17/201129245디버깅 기술: 36. Visual Studio의 .NET Disassembly 창의 call 호출에 사용되는 주소의 의미는? [1]파일 다운로드1
1018정성태4/16/201132882오류 유형: 116. 윈도우 업데이트 오류 - 0x8020000E
1017정성태4/14/201127660개발 환경 구성: 115. MSBuild - x86/x64, .NET 2/4, debug/release 빌드에 대한 배치 처리파일 다운로드1
1016정성태4/13/201143698개발 환경 구성: 114. Windows Thin PC 설치 [2]
1015정성태4/9/201129065.NET Framework: 209. AutoReset, ManualReset, Monitor.Wait의 차이파일 다운로드1
1014정성태4/7/2011106479오류 유형: 115. ORA-12516: TNS:listener could not find available handler with matching protocol stack [2]
1013정성태4/7/201124283Team Foundation Server: 45. SharePoint 2010 + TFS 2010 환경에서 ProcessGuidance.html 파일 다운로드 문제
1012정성태4/6/201133023.NET Framework: 208. WCF - 접속된 클라이언트의 IP 주소 알아내는 방법 [1]
1011정성태3/31/201135418오류 유형: 114. 인증서 갱신 오류 - The request contains no certificate template information.
1010정성태3/30/201126181개발 환경 구성: 113. 응용 프로그램 디자인 스케치 도구 - SketchFlow [4]
1009정성태3/29/201138515개발 환경 구성: 112. Visual Studio 2010 - .NET Framework 소스 코드 디버깅 [4]
1008정성태3/27/201130893.NET Framework: 207. C# - Right operand가 음수인 Shift 연산 결과 [2]
1007정성태3/16/201131717개발 환경 구성: 111. Excel - XML 파일 연동 [5]파일 다운로드1
1006정성태3/15/201125505.NET Framework: 206. XML/XSD - 외래키처럼 참조 제한 거는 방법파일 다운로드1
1005정성태3/11/201135293개발 환경 구성: 110. 엑셀 매크로 함수 관련 오류 [2]
1004정성태3/3/201124496개발 환경 구성: 109. SharePoint Health Analyzer 디스크 부족 경고 제어
1003정성태3/3/201125514오류 유형: 113. SQL Server - DB Attach 시 Parameter name: nColIndex 오류 발생
1002정성태3/2/201123900Team Foundation Server: 44. TFS 설치 후, Team Portal의 Dashboard를 빠르게 확인하는 방법
1001정성태3/2/201127944Team Foundation Server: 43. TFS 2010 + SharePoint 2010 설치
1000정성태3/1/201132905오류 유형: 112. Remote FX RDP 연결 시 오류 유형 2가지 [5]
999정성태2/28/201146463개발 환경 구성: 108. RemoteFX - Windows 7 가상 머신에서 DirectX 9c 환경을 제공 [5]
998정성태2/27/201120166Team Foundation Server: 42. TFS Application-Tier만 재설치
... 151  152  153  154  155  156  157  158  159  160  [161]  162  163  164  165  ...