Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... [46]  47  48  49  50  51  52  53  54  55  56  57  58  59  60  ...
NoWriterDateCnt.TitleFile(s)
12828정성태9/4/202116884.NET Framework: 1114. C# 10 - (13) 단일 파일 내에 적용되는 namespace 선언파일 다운로드1
12827정성태9/4/202117851스크립트: 27. 파이썬 - 웹 페이지 데이터 수집을 위한 scrapy Crawler 사용법 요약
12826정성태9/3/202122038.NET Framework: 1113. C# 10 - (12) 문자열 보간 성능 개선 [1]파일 다운로드1
12825정성태9/3/202117070개발 환경 구성: 603. GoLand - WSL 환경과 연동
12824정성태9/2/202126332오류 유형: 760. 파이썬 tensorflow - Dst tensor is not initialized. 오류 메시지
12823정성태9/2/202116253스크립트: 26. 파이썬 - PyCharm을 이용한 fork 디버그 방법
12822정성태9/1/202121399오류 유형: 759. 파이썬 tensorflow - ValueError: Shapes (...) and (...) are incompatible [2]
12821정성태9/1/202115771.NET Framework: 1112. C# - .NET 6부터 공개된 ISpanFormattable 사용법
12820정성태9/1/202117822VC++: 147. Golang - try/catch에 대응하는 panic/recover [1]파일 다운로드1
12819정성태8/31/202118219.NET Framework: 1111. C# - FormattableString 타입
12818정성태8/31/202114984Windows: 198. 윈도우 - 작업 관리자에서 (tensorflow 등으로 인한) GPU 연산 부하 보는 방법
12817정성태8/31/202118912스크립트: 25. 파이썬 - 윈도우 환경에서 directml을 이용한 tensorflow의 AMD GPU 사용 방법
12816정성태8/30/202125648스크립트: 24. 파이썬 - tensorflow 2.6 NVidia GPU 사용 방법 [2]
12815정성태8/30/202117223개발 환경 구성: 602. WSL 2 - docker-desktop-data, docker-desktop (%LOCALAPPDATA%\Docker\wsl\data\ext4.vhdx) 파일을 다른 디렉터리로 옮기는 방법
12814정성태8/30/202122511.NET Framework: 1110. C# 11 - 인터페이스 내에 정적 추상 메서드 정의 가능 (DIM for Static Members) [2]파일 다운로드1
12813정성태8/29/202119280.NET Framework: 1109. C# 10 - (11) Lambda 개선파일 다운로드1
12812정성태8/28/202118519.NET Framework: 1108. C# 10 - (10) 개선된 #line 지시자
12811정성태8/27/202118427Linux: 44. 윈도우 개발자를 위한 리눅스 fork 동작 방식 설명 (파이썬 코드)
12810정성태8/27/202117791.NET Framework: 1107. .NET Core/5+에서 동적 컴파일한 C# 코드를 (Breakpoint도 활용하며) 디버깅하는 방법 - #line 지시자파일 다운로드1
12809정성태8/26/202116977.NET Framework: 1106. .NET Core/5+에서 C# 코드를 동적으로 컴파일/사용하는 방법 [1]파일 다운로드1
12808정성태8/25/202119447오류 유형: 758. go: ...: missing go.sum entry; to add it: go mod download ...
12807정성태8/25/202120279.NET Framework: 1105. C# 10 - (9) 비동기 메서드가 사용할 AsyncMethodBuilder 선택 가능파일 다운로드1
12806정성태8/24/202116277개발 환경 구성: 601. PyCharm - 다중 프로세스 디버깅 방법
12805정성태8/24/202117666.NET Framework: 1104. C# 10 - (8) 분해 구문에서 기존 변수의 재사용 가능파일 다운로드1
12804정성태8/24/202117629.NET Framework: 1103. C# 10 - (7) Source Generator V2 APIs
12803정성태8/23/202118222개발 환경 구성: 600. pip cache 디렉터리 옮기는 방법
... [46]  47  48  49  50  51  52  53  54  55  56  57  58  59  60  ...