Microsoft MVP성태의 닷넷 이야기
.NET Framework: 116. 소켓 연결 시간 제한 [링크 복사], [링크+제목 복사],
조회: 36883
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)
(시리즈 글이 3개 있습니다.)
.NET Framework: 116. 소켓 연결 시간 제한
; https://www.sysnet.pe.kr/2/0/629

.NET Framework: 272. 소켓 연결 시간 제한 - 두 번째 이야기
; https://www.sysnet.pe.kr/2/0/1177

개발 환경 구성: 457. 윈도우 응용 프로그램의 Socket 연결 시 time-out 시간 제어
; https://www.sysnet.pe.kr/2/0/12015





소켓 연결 시간 제한


네트워크 상에서 프로그램을 하다 보면, 특정 컴퓨터에 연결이 가능한지, 가능하다면 그 컴퓨터에서 구동 중인 응용 프로그램이 정상적으로 원하는 포트로 접속 대기 중인지를 알아야 할 때가 있습니다.

저 같은 경우에, 보통 해당 컴퓨터가 살아 있는지를 체크하는 데에는 그냥 단순히 Ping 클래스를 애용합니다. 다음과 같이.

public bool TryConnect(string targetAddress, int connectTimeout)
{
    Ping ping = new Ping();
    try
    {
        PingReply reply = ping.Send(targetAddress, connectTimeout);
        return (reply.Status == IPStatus.Success);
    }
    catch (Exception)
    {
    }

    return false;
}

그런데, 특정 포트에 소켓이 연결 가능한지를 알아보는 테스트는 영 애매합니다. 구현하기에 따라서 여러 가지 방법이 있을 수 있겠지만, 저 같은 경우에는 다음의 글에서 나온 방법을 사용하고 있습니다. ^^

How to shorten socket.connect() timeout ??
; http://forums.asp.net/p/1138952/1826854.aspx

코드가 간단하기 때문에 여기에 옮겨 놓겠습니다.

public static Socket ConnectToserver(IPEndPoint endPoint, int port, int timeoutMs)
{
    Socket socket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp);

    try
    {
        // do not block - do not want to be forced to wait on (too- long) timeout 
        socket.Blocking = false;

        // initiate connection - will cause exception because we're not  blocking 
        socket.Connect(endPoint);
        return socket;
    }
    catch (SocketException socketException)
    {
        // check if this exception is for the expected 'Would Block' error 
        if (socketException.ErrorCode != 10035)
        {
            socket.Close();
            // the error is not 'Would Block', so propogate the exception 
            throw;
        }
        // if we get here, the error is 'Would Block' so just continue  execution   } 
        // wait until connected or we timeout 
        int timeoutMicroseconds = timeoutMs * 1000;
        if (socket.Poll(timeoutMicroseconds, SelectMode.SelectWrite) == false)
        {
            // timed out (윈도우 응용 프로그램의 Socket 연결 시 time-out 시간 제어)
            socket.Close();
            throw new Exception("The host failed to connect");
        }

        // *** AT THIS POINT socket.Connected SHOULD EQUAL TRUE BUT  IS FALSE!  ARGH! 
        // set socket back to blocking 
        socket.Blocking = true;
        return socket;
    }

}




만약 가능하다면, 서버 측에 UDP 소켓을 함께 열어두는 것도 좋은 방법일 수 있습니다. 즉, TCP 연결을 하기 전 UDP로 echo 테스트를 먼저 하는 것입니다. 어차피 UDP는 "연결" 작업이 없으므로 데이터 전송 후 echo된 데이터로 서버의 활성 여부를 알 수 있습니다. 따라서 다음과 같은 식으로 간단하게 ReceiveTimeout 설정을 곁들여 자유로운 timeout 구현을 할 수 있습니다.

Socket udp = new Socket(AddressFamily.InterNetwork, SocketType.Dgram, ProtocolType.Udp);
udp.ReceiveTimeout = 1000;

byte[] data = Encoding.ASCII.GetBytes("ECHO");

EndPoint ep = new IPEndPoint(IPAddress.Parse("192.168.9.37"), 5151);
udp.SendTo(data, ep);

byte[] received = new byte[4096];
int recv = udp.ReceiveFrom(received, SocketFlags.None, ref ep); 

Console.WriteLine(recv);
Console.WriteLine(Encoding.ASCII.GetString(received));

// ... UDP 체크가 성공했다면 이후 TCP 연결 시도 ...

위의 경우 만약 대상 서버가 없다면 ReceiveFrom에서 Timeout 예외가 발생합니다.

Unhandled exception. System.Net.Sockets.SocketException (10060): A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.


만약 이것을 원치 않는다면 아래의 글에서 설명한 방법에 따라,

C# - Socket.Close 시 Socket.Receive 메서드에서 예외가 발생하는 문제
; https://www.sysnet.pe.kr/2/0/13116#udp

UDP 소켓을 바인딩시킨 모드로 에러 코드를 반한하는 버전의 Receive 메서드를 호출하면 됩니다.



[이 토픽에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 3/15/2024]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 61  62  63  64  65  66  67  68  69  70  71  72  73  74  [75]  ...
NoWriterDateCnt.TitleFile(s)
12153정성태2/23/202024322.NET Framework: 898. Trampoline을 이용한 후킹의 한계파일 다운로드1
12152정성태2/23/202021345.NET Framework: 897. 실행 시에 메서드 가로채기 - CLR Injection: Runtime Method Replacer 개선 - 세 번째 이야기(Trampoline 후킹)파일 다운로드1
12151정성태2/22/202023999.NET Framework: 896. C# - Win32 API를 Trampoline 기법을 이용해 C# 메서드로 가로채는 방법 - 두 번째 이야기 (원본 함수 호출)파일 다운로드1
12150정성태2/21/202024087.NET Framework: 895. C# - Win32 API를 Trampoline 기법을 이용해 C# 메서드로 가로채는 방법 [1]파일 다운로드1
12149정성태2/20/202020986.NET Framework: 894. eBEST C# XingAPI 래퍼 - 연속 조회 처리 방법 [1]
12148정성태2/19/202025631디버깅 기술: 163. x64 환경에서 구현하는 다양한 Trampoline 기법 [1]
12147정성태2/19/202020976디버깅 기술: 162. x86/x64의 기계어 코드 최대 길이
12146정성태2/18/202022184.NET Framework: 893. eBEST C# XingAPI 래퍼 - 로그인 처리파일 다운로드1
12145정성태2/18/202023794.NET Framework: 892. eBEST C# XingAPI 래퍼 - Sqlite 지원 추가파일 다운로드1
12144정성태2/13/202023993.NET Framework: 891. 실행 시에 메서드 가로채기 - CLR Injection: Runtime Method Replacer 개선 - 두 번째 이야기파일 다운로드1
12143정성태2/13/202018403.NET Framework: 890. 상황별 GetFunctionPointer 반환값 정리 - x64파일 다운로드1
12142정성태2/12/202022308.NET Framework: 889. C# 코드로 접근하는 MethodDesc, MethodTable파일 다운로드1
12141정성태2/10/202021290.NET Framework: 888. C# - ASP.NET Core 웹 응용 프로그램의 출력 가로채기 [2]파일 다운로드1
12140정성태2/10/202022661.NET Framework: 887. C# - ASP.NET 웹 응용 프로그램의 출력 가로채기파일 다운로드1
12139정성태2/9/202022318.NET Framework: 886. C# - Console 응용 프로그램에서 UI 스레드 구현 방법
12138정성태2/9/202028566.NET Framework: 885. C# - 닷넷 응용 프로그램에서 SQLite 사용 [6]파일 다운로드1
12137정성태2/9/202020207오류 유형: 592. [AhnLab] 경고 - 디버거 실행을 탐지했습니다.
12136정성태2/6/202021867Windows: 168. Windows + S(또는 Q)로 뜨는 작업 표시줄의 검색 바가 동작하지 않는 경우
12135정성태2/6/202027656개발 환경 구성: 468. Nuget 패키지의 로컬 보관 폴더를 옮기는 방법 [2]
12134정성태2/5/202024922.NET Framework: 884. eBEST XingAPI의 C# 래퍼 버전 - XingAPINet Nuget 패키지 [5]파일 다운로드1
12133정성태2/5/202022690디버깅 기술: 161. Windbg 환경에서 확인해 본 .NET 메서드 JIT 컴파일 전과 후 - 두 번째 이야기
12132정성태1/28/202025713.NET Framework: 883. C#으로 구현하는 Win32 API 후킹(예: Sleep 호출 가로채기) [1]파일 다운로드1
12131정성태1/27/202024433개발 환경 구성: 467. LocaleEmulator를 이용해 유니코드를 지원하지 않는(한글이 깨지는) 프로그램을 실행하는 방법 [1]
12130정성태1/26/202022027VS.NET IDE: 142. Visual Studio에서 windbg의 "Open Executable..."처럼 EXE를 직접 열어 디버깅을 시작하는 방법
12129정성태1/26/202029006.NET Framework: 882. C# - 키움 Open API+ 사용 시 Registry 등록 없이 KHOpenAPI.ocx 사용하는 방법 [3]
12128정성태1/26/202023144오류 유형: 591. The code execution cannot proceed because mfc100.dll was not found. Reinstalling the program may fix this problem.
... 61  62  63  64  65  66  67  68  69  70  71  72  73  74  [75]  ...