Microsoft MVP성태의 닷넷 이야기
.NET Framework: 622. PeerFinder Wi-Fi Direct 통신 시 Read/Write/Dispose 문제 [링크 복사], [링크+제목 복사],
조회: 24188
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

PeerFinder Wi-Fi Direct 통신 시 Read/Write/Dispose 문제

이번 글은, 이 문제에 대한 적절한 해법을 알고 있는 분이 읽기를 바라며 씁니다. ^^

가령, 다음은 클라이언트 측 코드입니다.

void Sender(Windows.Networking.Sockets.StreamSocket socket)
{
    using (Stream streamWrite = socket.OutputStream.AsStreamForWrite())
    using (BinaryWriter writer = new BinaryWriter(streamWrite))
    using (Stream streamRead = socket.InputStream.AsStreamForRead())
    using (BinaryReader reader = new BinaryReader(streamRead))
    {
        long totalToSend = 64 * 1024 * 1024;

        writer.Write(totalToSend); // 8바이트 쓰기

        byte[] buffer = new byte[totalToSend];
        writer.Write(buffer);      // 64MB 쓰기
        writer.Flush();
        reader.ReadBoolean();      // 상대로부터 True/False 결과 읽기
    }

    socket.Dispose();  // 소켓을 닫습니다.
}

간단하게 8바이트 + 64MB를 쓰고 Flush 한 다음 1바이트를 읽는 코드입니다. 이에 대응해 서버 측 코드는 다음과 같습니다.

Windows.Networking.Sockets.StreamSocket socket = ...;

using (Stream streamRead = socket.InputStream.AsStreamForRead())
using (Stream streamWrite = socket.OutputStream.AsStreamForWrite())
using (BinaryReader reader = new BinaryReader(streamRead))
using (BinaryWriter writer = new BinaryWriter(streamWrite))
{
    long totalToRead = reader.ReadInt64();  // 8바이트 읽고
    long read = 0;
    byte[] buffer = new byte[32 * 1024 * 1024];

    while (read < totalToRead)           // 8바이트에 지정된 길이만큼 읽고
    {
        long toRead = totalToRead - read;

        if (toRead >= buffer.Length)
        {
            toRead = buffer.Length;
        }

        reader.Read(buffer, 0, (int)toRead);
        read += toRead;
    }

    writer.Write(true); // 다 읽었으면 true를 클라이언트로 전송
    writer.Flush();
}

socket.Dispose(); // 소켓을 닫습니다.

별다를 것이 없는 코드인데 위의 프로그램을 돌려 보면 간혹 한 번씩 클라이언트 측의 reader.ReadBoolean(); 호출에서 다음과 같은 예외가 발생합니다.

Unhandled Exception: System.IO.IOException: The I/O operation has been aborted because of either a thread exit or an application request.

The I/O operation has been aborted because of either a thread exit or an application request.
 ---> System.Exception: The I/O operation has been aborted because of either a thread exit or an application request.

The I/O operation has been aborted because of either a thread exit or an application request.

   --- End of inner exception stack trace ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.IO.StreamOperationAsyncResult.ProcessCompletedOperation()
   at System.IO.WinRtToNetFxStreamAdapter.EndRead(IAsyncResult asyncResult)
   at System.IO.WinRtToNetFxStreamAdapter.Read(Byte[] buffer, Int32 offset, Int32 count)
   at System.IO.BufferedStream.ReadByte()
   at System.IO.BinaryReader.FillBuffer(Int32 numBytes)
   at System.IO.BinaryReader.ReadBoolean()
   at PeerClient.PeerClient.Sender(StreamSocket socket) in C:\ConsoleApplication1\PeerClient\Program.cs:line 94
   at PeerClient.PeerClient.<Start>d__2.MoveNext() in C:\ConsoleApplication1\PeerClient\Program.cs:line 73
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.AsyncMethodBuilderCore.<>c.<ThrowAsync>b__6_1(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()

예상되는 문제는 서버 측 socket.Dispose() 호출입니다. 아무래도 Write/Flush 후 곧바로 닫기 때문에 발생하는데요, 실제로 서버 측 Dispose를 호출하지 않으면 오류가 발생하지 않습니다. 하지만, 서버 측 자원이 제대로 해제되지 않아서 그런지 클라이언트를 다시 실행해서 접속하려고 하면 ConnectAsync에서,

var streamSocket = PeerFinder.ConnectAsync(info).AsTask().Result;

다음과 같은 식의 오류가 발생합니다.

System.AggregateException occurred
  HResult=0x80131500
  Message=One or more errors occurred.
  Source=mscorlib
  StackTrace:
   at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
   at PeerClient.PeerClient.<Start>d__2.MoveNext() in C:\ConsoleApplication1\PeerClient\Program.cs:line 68

Inner Exception 1:
ArgumentException: Value does not fall within the expected range.

아쉽게도 Windows.Networking.Sockets.StreamSocket 타입은 ConnectAsync, Dispose 외의 딱히 별다르게 제공하는 메서드가 없습니다. 그래서 일단, 가장 안전한 방법을 서버 측에서 Dispose 하기 전 약간의 Sleep 시간을 주는 것으로 임시 조치를 했습니다.

Thread.Sleep(1000);
socket.Dispose();

혹시 PeerFinder로 Wi-Fi Direct 통신 시 위와 같은 문제에 대한 적절한 해답을 아시는 분은 덧글 부탁드립니다. ^^





[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 11/8/2016]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 61  62  63  64  65  66  67  68  69  70  71  72  73  74  [75]  ...
NoWriterDateCnt.TitleFile(s)
12153정성태2/23/202024298.NET Framework: 898. Trampoline을 이용한 후킹의 한계파일 다운로드1
12152정성태2/23/202021331.NET Framework: 897. 실행 시에 메서드 가로채기 - CLR Injection: Runtime Method Replacer 개선 - 세 번째 이야기(Trampoline 후킹)파일 다운로드1
12151정성태2/22/202023981.NET Framework: 896. C# - Win32 API를 Trampoline 기법을 이용해 C# 메서드로 가로채는 방법 - 두 번째 이야기 (원본 함수 호출)파일 다운로드1
12150정성태2/21/202024065.NET Framework: 895. C# - Win32 API를 Trampoline 기법을 이용해 C# 메서드로 가로채는 방법 [1]파일 다운로드1
12149정성태2/20/202020969.NET Framework: 894. eBEST C# XingAPI 래퍼 - 연속 조회 처리 방법 [1]
12148정성태2/19/202025606디버깅 기술: 163. x64 환경에서 구현하는 다양한 Trampoline 기법 [1]
12147정성태2/19/202020963디버깅 기술: 162. x86/x64의 기계어 코드 최대 길이
12146정성태2/18/202022173.NET Framework: 893. eBEST C# XingAPI 래퍼 - 로그인 처리파일 다운로드1
12145정성태2/18/202023786.NET Framework: 892. eBEST C# XingAPI 래퍼 - Sqlite 지원 추가파일 다운로드1
12144정성태2/13/202023977.NET Framework: 891. 실행 시에 메서드 가로채기 - CLR Injection: Runtime Method Replacer 개선 - 두 번째 이야기파일 다운로드1
12143정성태2/13/202018381.NET Framework: 890. 상황별 GetFunctionPointer 반환값 정리 - x64파일 다운로드1
12142정성태2/12/202022294.NET Framework: 889. C# 코드로 접근하는 MethodDesc, MethodTable파일 다운로드1
12141정성태2/10/202021277.NET Framework: 888. C# - ASP.NET Core 웹 응용 프로그램의 출력 가로채기 [2]파일 다운로드1
12140정성태2/10/202022646.NET Framework: 887. C# - ASP.NET 웹 응용 프로그램의 출력 가로채기파일 다운로드1
12139정성태2/9/202022305.NET Framework: 886. C# - Console 응용 프로그램에서 UI 스레드 구현 방법
12138정성태2/9/202028554.NET Framework: 885. C# - 닷넷 응용 프로그램에서 SQLite 사용 [6]파일 다운로드1
12137정성태2/9/202020195오류 유형: 592. [AhnLab] 경고 - 디버거 실행을 탐지했습니다.
12136정성태2/6/202021858Windows: 168. Windows + S(또는 Q)로 뜨는 작업 표시줄의 검색 바가 동작하지 않는 경우
12135정성태2/6/202027646개발 환경 구성: 468. Nuget 패키지의 로컬 보관 폴더를 옮기는 방법 [2]
12134정성태2/5/202024918.NET Framework: 884. eBEST XingAPI의 C# 래퍼 버전 - XingAPINet Nuget 패키지 [5]파일 다운로드1
12133정성태2/5/202022666디버깅 기술: 161. Windbg 환경에서 확인해 본 .NET 메서드 JIT 컴파일 전과 후 - 두 번째 이야기
12132정성태1/28/202025695.NET Framework: 883. C#으로 구현하는 Win32 API 후킹(예: Sleep 호출 가로채기) [1]파일 다운로드1
12131정성태1/27/202024411개발 환경 구성: 467. LocaleEmulator를 이용해 유니코드를 지원하지 않는(한글이 깨지는) 프로그램을 실행하는 방법 [1]
12130정성태1/26/202022018VS.NET IDE: 142. Visual Studio에서 windbg의 "Open Executable..."처럼 EXE를 직접 열어 디버깅을 시작하는 방법
12129정성태1/26/202028986.NET Framework: 882. C# - 키움 Open API+ 사용 시 Registry 등록 없이 KHOpenAPI.ocx 사용하는 방법 [3]
12128정성태1/26/202023140오류 유형: 591. The code execution cannot proceed because mfc100.dll was not found. Reinstalling the program may fix this problem.
... 61  62  63  64  65  66  67  68  69  70  71  72  73  74  [75]  ...