Microsoft MVP성태의 닷넷 이야기
사물인터넷: 52. New NodeMCU v3(ESP8266)의 http 통신 [링크 복사], [링크+제목 복사],
조회: 22658
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
(연관된 글이 3개 있습니다.)

New NodeMCU v3(ESP8266)의 http 통신

지난번에 ESP8266 보드에 대한 간단한 코딩을 해봤는데요.

New NodeMCU v3 아두이노 호환 보드의 기본 개발 환경 구성
; https://www.sysnet.pe.kr/2/0/11595

New NodeMCU v3 아두이노 호환 보드의 내장 LED 및 입력 핀 사용법
; https://www.sysnet.pe.kr/2/0/11605

사실 NodeMCU의 가장 큰 장점은 WiFi 지원이므로 이를 위한 소켓 통신 - 그중에서도 HTTP 통신을 빼놓을 수 없습니다. 지난 글에서 WiFiServer 클래스를 이용해 웹 서버로 동작하는 간단한 코드를 작성해 봤으니, 이번에는 WiFiClient를 이용한 다른 웹 서버로의 접속을 간단하게 작성해 봤습니다.

// [참고 소스 코드] esp8266/Arduino
// https://github.com/esp8266/Arduino/blob/master/doc/esp8266wifi/client-examples.rst

#include <ESP8266WiFi.h>
#include <ESP8266WiFiAP.h>
#include <ESP8266WiFiGeneric.h>
#include <ESP8266WiFiMulti.h>
#include <ESP8266WiFiScan.h>
#include <ESP8266WiFiSTA.h>
#include <ESP8266WiFiType.h>
#include <WiFiClient.h>
#include <WiFiClientSecure.h>
#include <WiFiServer.h>
#include <WiFiServerSecure.h>
#include <WiFiUdp.h>

const char *ssid = "...무선 ssdi...";
const char *password = "...무선 password..."; 
int _buildLedPin = 2;

void setup()
{
  Serial.begin(115200);
  delay(10);

  Serial.printf("%d: Connecting to %d\n", millis(), ssid);
  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED)
  {
    delay(1000);
    Serial.print(".");
  }

  Serial.printf("\n%d: WiFi connected: %s\n", millis(), WiFi.localIP().toString().c_str());
  pinMode(_buildLedPin, OUTPUT);
}

void loop()
{
  WiFiClient client;
  String host = "www.naver.com";

  bool connected = client.connect(host, 80);

  Serial.printf("%d: Connected - %d\n", millis(), connected);

  do
  {
    if (connected == false)
    {
      break;
    }

    client.print(String("GET /") + " HTTP/1.1\r\n" + 
            "Host: " + host + "\r\n" +
            "Connection: close\r\n" + "\r\n");

    int readBytes = 0;
    while (client.connected() == 1)
    {
      if (client.available())
      {
        // 아래의 코드 영역만 원하는 용도에 맞게 재구성
        String line = client.readStringUntil('\n');
        readBytes += line.length();
      }
    }

    Serial.printf("%d: # of recv bytes: %d\n", millis(), readBytes);

    Blink(2000);
  } while (false);

  client.stop();
}

void Blink(int ledOnTime)
{
  digitalWrite(_buildLedPin, LOW);
  delay(ledOnTime);
  digitalWrite(_buildLedPin, HIGH);
  delay(ledOnTime);
}

(첨부 파일은 이 글의 예제를 vscode 양식으로 포함합니다.)




개발 환경으로 Visual Studio Code를 사용하는 경우, 빌드 후 배포한 다음 소스 코드 변경 없이 다시 Verify나 Upload를 하게 되면 다음과 같은 경고를 보게 됩니다.

[Warning] Output path is not specified. Unable to reuse previously compiled files. Upload could be slow. See README.

왜냐하면, Visual Studio Code는 "Output" 경로가 명시되어 있지 않으면 임시 폴더를 사용하게 되고 이게 빌드 때마다 생성하기 때문에 전체적으로 바이너리 생성 속도가 상당히 느립니다. 사용하게 되는 임시 폴더의 경로는 빌드 출력 결과에 보면 다음과 같은 식으로 찾을 수 있습니다. (빌드 완료 후 해당 폴더는 삭제됩니다.)

Uploading 262496 bytes from %LOCALAPPDATA%\Temp\arduino_build_200452/http_get.ino.bin to flash at 0x00000000

빌드 중간 결과물을 보존하게 되면 이후의 빌드에서 좀 더 빠르게 작업이 진행되는데 이를 위해 arduino.json 파일의,

./.vscode/arduino.json

설정에 "output" 항목을 다음과 같이 추가하면 됩니다.

{
    "sketch": "http_get.ino",
    "board": "esp8266:esp8266:d1",
    "configuration": "CpuFrequency=80,...[생략]...",
    "port": "COM3",
    "output": "../build"
}

쉽게 말해, output 설정은 거의 필수 항목이라고 봐도 무방합니다.




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 5/5/2021]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 121  122  123  124  [125]  126  127  128  129  130  131  132  133  134  135  ...
NoWriterDateCnt.TitleFile(s)
10836정성태8/21/201522227오류 유형: 302. 설치 파일 실행 시 "This app can't run on your PC" 오류가 뜬다면?
10835정성태8/21/201530106웹: 31. Microsoft Edge 브라우저를 명령행에서 띄우는 방법 [1]
10834정성태8/19/201522927.NET Framework: 526. 닷넷 - 값 형식을 new 없이 생성하면 0으로 초기화되지 않는다?
10833정성태8/18/201527283.NET Framework: 525. C# - 닷넷에서 프로세스가 열고 있는 파일 목록을 구하는 방법파일 다운로드1
10832정성태8/17/201531401디버깅 기술: 74. x64 콜 스택 인자 추적과 windbg의 Child-SP, RetAddr, Args to Child 값 확인 [8]파일 다운로드2
10831정성태8/13/201532182.NET Framework: 524. .NET 4.0과 .NET 4.5의 컴파일 결과 차이점 [1]파일 다운로드1
10830정성태8/12/201525823개발 환경 구성: 275. Web.config이 적용되지 않는 프로젝트에서 Razor 템플릿 파일의 C# 컴파일러 버전 제어 [1]
10829정성태8/10/201527985개발 환경 구성: 274. PowerShell/명령행에서 JDK/JRE를 무인(unattended)/자동 설치를 하는 방법 [3]
10828정성태8/10/201533407웹: 30. Edge 브라우저에서 "이 웹 사이트에는 Internet Explorer가 필요함" 단계를 없애는 방법 [1]
10827정성태7/8/201534217개발 환경 구성: 273. Visual Studio 2015에서 Github와 연동하는 방법 [3]
10826정성태7/8/201524641오류 유형: 301. The trust relationship between this workstation and the primary domain failed. - 두 번째 이야기
10825정성태7/8/201523199개발 환경 구성: 272. Visual Studio IDE 설치 없이 Visual Studio SDK 설치하는 방법
10824정성태7/7/201528920개발 환경 구성: 271. Team Foundation Server 2015 설치 방법 [1]
10823정성태7/7/201529799오류 유형: 300. SqlException (0x80131904): Unable to open the physical file
10822정성태7/7/201528503오류 유형: 299. The 'Visual C++ Project System Package' package did not load correctly.
10821정성태7/7/201521832오류 유형: 298. Unable to start debugging on the web server. IIS does not list a web site that matches the launched URL.
10820정성태7/7/201527333오류 유형: 297. HTTP Error 503. The service is unavailable. - 두 번째
10819정성태7/2/201530516오류 유형: 296. SQL Server Express 시작 오류 - error code 3417
10818정성태7/1/201529665오류 유형: 295. HTTP Error 503. The service is unavailable. [1]
10817정성태6/29/201533984.NET Framework: 523. C# 람다(Lambda)에서 변수 캡처 방식 [3]
10816정성태6/25/201529430.NET Framework: 522. 닷넷의 어셈블리 서명 데이터 확인 방법파일 다운로드1
10815정성태6/23/201528062Graphics: 1. 자네 나와 함께... UNITY 하지 않겠는가! [4]
10814정성태6/22/201525731.NET Framework: 521. Roslyn을 이용해 C# 문법 변형하기 (2) [5]
10813정성태6/21/201526622.NET Framework: 520. Roslyn을 이용해 C# 문법 변형하기 (1)
10812정성태6/20/201527525.NET Framework: 519. C# 6.0 오픈 소스 컴파일러 Roslyn - 빌드 및 테스트 방법 [1]
10811정성태6/20/201524678오류 유형: 294. OpenAuth 사용 시 System.Data.SqlClient.SqlException 예외가 Output 창에 출력되는 문제
... 121  122  123  124  [125]  126  127  128  129  130  131  132  133  134  135  ...