Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 31  32  33  [34]  35  36  37  38  39  40  41  42  43  44  45  ...
NoWriterDateCnt.TitleFile(s)
13123정성태9/8/202217162.NET Framework: 2046. C# 11 - 멤버(속성/필드)에 지정할 수 있는 required 예약어 추가
13122정성태8/26/202217560.NET Framework: 2045. C# 11 - 메서드 매개 변수에 대한 nameof 지원
13121정성태8/23/202213061C/C++: 157. Golang - 구조체의 slice 필드를 Reflection을 이용해 변경하는 방법
13120정성태8/19/202217621Windows: 209. Windows NT Service에서 UI를 다루는 방법 [3]
13119정성태8/18/202216707.NET Framework: 2044. .NET Core/5+ 프로젝트에서 참조 DLL이 보관된 공통 디렉터리를 지정하는 방법
13118정성태8/18/202213481.NET Framework: 2043. WPF Color의 기본 색 영역은 (sRGB가 아닌) scRGB [2]
13117정성태8/17/202217973.NET Framework: 2042. C# 11 - 파일 범위 내에서 유효한 타입 정의 (File-local types)파일 다운로드1
13116정성태8/4/202218350.NET Framework: 2041. C# - Socket.Close 시 Socket.Receive 메서드에서 예외가 발생하는 문제파일 다운로드1
13115정성태8/3/202219021.NET Framework: 2040. C# - ValueTask와 Task의 성능 비교 [1]파일 다운로드1
13114정성태8/2/202218730.NET Framework: 2039. C# - Task와 비교해 본 ValueTask 사용법파일 다운로드1
13113정성태7/31/202218374.NET Framework: 2038. C# 11 - Span 타입에 대한 패턴 매칭 (Pattern matching on ReadOnlySpan<char>)
13112정성태7/30/202219136.NET Framework: 2037. C# 11 - 목록 패턴(List patterns) [1]파일 다운로드1
13111정성태7/29/202218611.NET Framework: 2036. C# 11 - IntPtr/UIntPtr과 nint/nuint의 통합파일 다운로드1
13110정성태7/27/202217856.NET Framework: 2035. C# 11 - 새로운 연산자 ">>>" (Unsigned Right Shift)파일 다운로드1
13109정성태7/27/202220009VS.NET IDE: 177. 비주얼 스튜디오 2022를 이용한 (소스 코드가 없는) 닷넷 모듈 디버깅 - "외부 원본(External Sources)" [1]
13108정성태7/26/202217150Linux: 53. container에 실행 중인 Golang 프로세스를 디버깅하는 방법 [1]
13107정성태7/25/202215964Linux: 52. Debian/Ubuntu 계열의 docker container에서 자주 설치하게 되는 명령어
13106정성태7/24/202214889오류 유형: 819. 닷넷 6 프로젝트의 "Conditional compilation symbols" 기본값 오류
13105정성태7/23/202218254.NET Framework: 2034. .NET Core/5+ 환경에서 (프로젝트가 아닌) C# 코드 파일을 입력으로 컴파일하는 방법 - 두 번째 이야기 [1]
13104정성태7/23/202221845Linux: 51. WSL - init에서 systemd로 전환하는 방법
13103정성태7/22/202217167오류 유형: 818. WSL - systemd-genie와 관련한 2가지(systemd-remount-fs.service, multipathd.socket) 에러
13102정성태7/19/202216764.NET Framework: 2033. .NET Core/5+에서는 구할 수 없는 HttpRuntime.AppDomainAppId
13101정성태7/15/202230303도서: 시작하세요! C# 10 프로그래밍
13100정성태7/15/202218853.NET Framework: 2032. C# 11 - shift 연산자 재정의에 대한 제약 완화 (Relaxing Shift Operator)
13099정성태7/14/202218175.NET Framework: 2031. C# 11 - 사용자 정의 checked 연산자파일 다운로드1
13098정성태7/13/202215866개발 환경 구성: 647. Azure - scale-out 상태의 App Service에서 특정 인스턴스에 요청을 보내는 방법 [1]
... 31  32  33  [34]  35  36  37  38  39  40  41  42  43  44  45  ...