Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 31  32  33  34  35  36  37  [38]  39  40  41  42  43  44  45  ...
NoWriterDateCnt.TitleFile(s)
13028정성태4/13/202217213.NET Framework: 1193. (appsettings.json처럼) web.config의 Debug/Release에 따른 설정 적용
13027정성태4/12/202216868.NET Framework: 1192. C# - 환경 변수의 변화를 알리는 WM_SETTINGCHANGE Win32 메시지 사용법파일 다운로드1
13026정성태4/11/202217678.NET Framework: 1191. C 언어로 작성된 FFmpeg Examples의 C# 포팅 전체 소스 코드 [3]
13025정성태4/11/202217430.NET Framework: 1190. C# - ffmpeg(FFmpeg.AutoGen)를 이용한 vaapi_encode.c, vaapi_transcode.c 예제 포팅
13024정성태4/7/202215988.NET Framework: 1189. C# - 런타임 환경에 따라 달라진 AppDomain.GetCurrentThreadId 메서드
13023정성태4/6/202216535.NET Framework: 1188. C# - ffmpeg(FFmpeg.AutoGen)를 이용한 transcoding.c 예제 포팅 [3]
13022정성태3/31/202215939Windows: 202. 윈도우 11 업그레이드 - "PC Health Check"를 통과했지만 여전히 업그레이드가 안 되는 경우 해결책
13021정성태3/31/202217627Windows: 201. Windows - INF 파일을 이용한 장치 제거 방법
13020정성태3/30/202215071.NET Framework: 1187. RDP 접속 시 WPF UserControl의 Unloaded 이벤트 발생파일 다운로드1
13019정성태3/30/202216542.NET Framework: 1186. Win32 Message를 Code로부터 메시지 이름 자체를 텍스트로 구하고 싶다면?파일 다운로드1
13018정성태3/29/202217118.NET Framework: 1185. C# - Unsafe.AsPointer가 반환한 포인터는 pinning 상태일까요? [5]
13017정성태3/28/202215229.NET Framework: 1184. C# - GC Heap에 위치한 참조 개체의 주소를 알아내는 방법 - 두 번째 이야기 [3]
13016정성태3/27/202217960.NET Framework: 1183. C# 11에 추가된 ref 필드의 (우회) 구현 방법파일 다운로드1
13015정성태3/26/202219940.NET Framework: 1182. C# 11 - ref struct에 ref 필드를 허용 [1]
13014정성태3/23/202216212VC++: 155. CComPtr/CComQIPtr과 Conformance mode 옵션의 충돌 [1]
13013정성태3/22/202214536개발 환경 구성: 641. WSL 우분투 인스턴스에 파이썬 2.7 개발 환경 구성하는 방법
13012정성태3/21/202214496오류 유형: 803. C# - Local '...' or its members cannot have their address taken and be used inside an anonymous method or lambda expression
13011정성태3/21/202218544오류 유형: 802. 윈도우 운영체제에서 웹캠 카메라 인식이 안 되는 경우
13010정성태3/21/202214433오류 유형: 801. Oracle.ManagedDataAccess.Core - GetTypes 호출 시 "Could not load file or assembly 'System.DirectoryServices.Protocols...'" 오류
13009정성태3/20/202217140개발 환경 구성: 640. docker - ibmcom/db2 컨테이너 실행
13008정성태3/19/202217163VS.NET IDE: 176. 비주얼 스튜디오 - 솔루션 탐색기에서 프로젝트를 선택할 때 csproj 파일이 열리지 않도록 만드는 방법
13007정성태3/18/202214741.NET Framework: 1181. C# - Oracle.ManagedDataAccess의 Pool 및 그것의 연결 개체 수를 알아내는 방법파일 다운로드1
13006정성태3/17/202217892.NET Framework: 1180. C# - ffmpeg(FFmpeg.AutoGen)를 이용한 remuxing.c 예제 포팅
13005정성태3/17/202216017오류 유형: 800. C# - System.InvalidOperationException: Late bound operations cannot be performed on fields with types for which Type.ContainsGenericParameters is true.
13004정성태3/16/202215573디버깅 기술: 182. windbg - 닷넷 메모리 덤프에서 AppDomain에 걸친 정적(static) 필드 값을 조사하는 방법
13003정성태3/15/202215928.NET Framework: 1179. C# - (.NET Framework를 위한) Oracle.ManagedDataAccess 패키지의 성능 카운터 설정 방법
... 31  32  33  34  35  36  37  [38]  39  40  41  42  43  44  45  ...