Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




1  [2]  3  4  5  6  7  8  9  10  11  12  13  14  15  ...
NoWriterDateCnt.TitleFile(s)
13585정성태3/26/20241502Windows: 262. PerformanceCounter의 InstanceName에 pid를 추가한 "Process V2"
13584정성태3/26/20241462개발 환경 구성: 708. Unity3D - C# Windows Forms / WPF Application에 통합하는 방법파일 다운로드1
13583정성태3/25/20241496Windows: 261. CPU Utilization이 100% 넘는 경우를 성능 카운터로 확인하는 방법
13582정성태3/19/20241607Windows: 260. CPU 사용률을 나타내는 2가지 수치 - 사용량(Usage)과 활용률(Utilization)파일 다운로드1
13581정성태3/18/20241769개발 환경 구성: 707. 빌드한 Unity3D 프로그램을 C++ Windows Application에 통합하는 방법
13580정성태3/15/20241304닷넷: 2231. C# - ReceiveTimeout, SendTimeout이 적용되지 않는 Socket await 비동기 호출파일 다운로드1
13579정성태3/13/20241513오류 유형: 899. HTTP Error 500.32 - ANCM Failed to Load dll
13578정성태3/11/20241668닷넷: 2230. C# - 덮어쓰기 가능한 환형 큐 (Circular queue)파일 다운로드1
13577정성태3/9/20241921닷넷: 2229. C# - 닷넷을 위한 난독화 도구 소개 (예: ConfuserEx)
13576정성태3/8/20241598닷넷: 2228. .NET Profiler - IMetaDataEmit2::DefineMethodSpec 사용법
13575정성태3/7/20241703닷넷: 2227. 최신 C# 문법을 .NET Framework 프로젝트에 쓸 수 있을까요?
13574정성태3/6/20241573닷넷: 2226. C# - "Docker Desktop for Windows" Container 환경에서의 IPv6 DualMode 소켓
13573정성태3/5/20241579닷넷: 2225. Windbg - dumasync로 분석하는 async/await 호출
13572정성태3/4/20241667닷넷: 2224. C# - WPF의 Dispatcher Queue로 알아보는 await 호출의 hang 현상파일 다운로드1
13571정성태3/1/20241644닷넷: 2223. C# - await 호출과 WPF의 Dispatcher Queue 동작 확인파일 다운로드1
13570정성태2/29/20241650닷넷: 2222. C# - WPF의 Dispatcher Queue 동작 확인파일 다운로드1
13569정성태2/28/20241554닷넷: 2221. C# - LoadContext, LoadFromContext 그리고 GAC파일 다운로드1
13568정성태2/27/20241798닷넷: 2220. C# - .NET Framework 프로세스의 LoaderOptimization 설정을 확인하는 방법파일 다운로드1
13567정성태2/27/20241806오류 유형: 898. .NET Framework 3.5 이하에서 mscoree.tlb 참조 시 System.BadImageFormatException파일 다운로드1
13566정성태2/27/20241822오류 유형: 897. Windows 7 SDK 설치 시 ".NET Development" 옵션이 비활성으로 선택이 안 되는 경우
13565정성태2/23/20241686닷넷: 2219. .NET CLR2 보안 모델에서의 개별 System.Security.Permissions 제어
13564정성태2/22/20241912Windows: 259. Hyper-V Generation 1 유형의 VM을 Generation 2 유형으로 바꾸는 방법
13563정성태2/21/20241951디버깅 기술: 196. windbg - async/await 비동기인 경우 메모리 덤프 분석의 어려움
13562정성태2/21/20241975오류 유형: 896. ASP.NET - .NET Framework 기본 예제에서 System.Web에 대한 System.IO.FileNotFoundException 예외 발생
13561정성태2/20/20242048닷넷: 2218. C# - (예를 들어, Socket) 비동기 I/O에 대한 await 호출 시 CancellationToken을 이용한 취소파일 다운로드1
13560정성태2/19/20242081디버깅 기술: 195. windbg 분석 사례 - Semaphore 잠금으로 인한 Hang 현상 (닷넷)
1  [2]  3  4  5  6  7  8  9  10  11  12  13  14  15  ...