Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




1  2  3  4  5  [6]  7  8  9  10  11  12  13  14  15  ...
NoWriterDateCnt.TitleFile(s)
13494정성태12/20/20232697Linux: 64. Linux 응용 프로그램의 (C++) so 의존성 줄이기(ReleaseMinDependency) - 두 번째 이야기
13493정성태12/19/20232895닷넷: 2185. C# - object를 QueryString으로 직렬화하는 방법
13492정성태12/19/20232552개발 환경 구성: 699. WSL에 nopCommerce 예제 구성
13491정성태12/19/20232346Linux: 63. 리눅스 - 다중 그룹 또는 사용자를 리소스에 권한 부여
13490정성태12/19/20232484개발 환경 구성: 698. Golang - GLIBC 의존을 없애는 정적 빌드 방법
13489정성태12/19/20232255개발 환경 구성: 697. GoLand에서 ldflags 지정 방법
13488정성태12/18/20232225오류 유형: 884. HTTP 500.0 - 명령행에서 실행한 ASP.NET Core 응용 프로그램을 실행하는 방법
13487정성태12/16/20232512개발 환경 구성: 696. C# - 리눅스용 AOT 빌드를 docker에서 수행 [1]
13486정성태12/15/20232324개발 환경 구성: 695. Nuget config 파일에 값 설정/삭제 방법
13485정성태12/15/20232190오류 유형: 883. dotnet build/restore - error : Root element is missing
13484정성태12/14/20232316개발 환경 구성: 694. Windows 디렉터리 경로를 WSL의 /mnt 포맷으로 구하는 방법
13483정성태12/14/20232455닷넷: 2184. C# - 하나의 resource 파일을 여러 프로그램에서 (AOT 시에도) 사용하는 방법파일 다운로드1
13482정성태12/13/20233147닷넷: 2183. C# - eFriend Expert OCX 예제를 .NET Core/5+ Console App에서 사용하는 방법 [2]파일 다운로드1
13481정성태12/13/20232467개발 환경 구성: 693. msbuild - .NET Core/5+ 프로젝트에서 resgen을 이용한 리소스 파일 생성 방법파일 다운로드1
13480정성태12/12/20232860개발 환경 구성: 692. Windows WSL 2 + Chrome 웹 브라우저 설치
13479정성태12/11/20232499개발 환경 구성: 691. WSL 2 (Ubuntu) + nginx 환경 설정
13477정성태12/8/20232741닷넷: 2182. C# - .NET 7부터 추가된 Int128, UInt128 [1]파일 다운로드1
13476정성태12/8/20232497닷넷: 2181. C# - .NET 8 JsonStringEnumConverter의 AOT를 위한 개선파일 다운로드1
13475정성태12/7/20232572닷넷: 2180. .NET 8 - 함수 포인터에 대한 Reflection 정보 조회파일 다운로드1
13474정성태12/6/20232391개발 환경 구성: 690. 닷넷 코어/5+ 버전의 ilasm/ildasm 실행 파일 구하는 방법 - 두 번째 이야기
13473정성태12/5/20232675닷넷: 2179. C# - 값 형식(Blittable)을 메모리 복사를 이용해 바이트 배열로 직렬화/역직렬화파일 다운로드1
13472정성태12/4/20232326C/C++: 164. Visual C++ - InterlockedCompareExchange128 사용 방법
13471정성태12/4/20232513Copilot - To enable GitHub Copilot, authorize this extension using GitHub's device flow
13470정성태12/2/20232771닷넷: 2178. C# - .NET 8부터 COM Interop에 대한 자동 소스 코드 생성 도입파일 다운로드1
13469정성태12/1/20232615닷넷: 2177. C# - (Interop DLL 없이) CoClass를 이용한 COM 개체 생성 방법파일 다운로드1
13468정성태12/1/20232421닷넷: 2176. C# - .NET Core/5+부터 달라진 RCW(Runtime Callable Wrapper) 대응 방식파일 다운로드1
1  2  3  4  5  [6]  7  8  9  10  11  12  13  14  15  ...