Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




1  2  3  4  5  6  7  8  [9]  10  11  12  13  14  15  ...
NoWriterDateCnt.TitleFile(s)
13782정성태10/23/20246241Linux: 93. Ubuntu 22.04 - 커널 이미지로부터 커널 함수 역어셈블
13781정성태10/22/20247039오류 유형: 930. WSL + eBPF: modprobe: FATAL: Module kheaders not found in directory
13780정성태10/22/20248282Linux: 92. WSL 2 - 커널 이미지로부터 커널 함수 역어셈블
13779정성태10/22/20246302개발 환경 구성: 729. WSL 2 - Mariner VM 커널 이미지 업데이트 방법
13778정성태10/21/20248481C/C++: 181. C/C++ - 소스코드 파일의 인코딩, 바이너리 모듈 상태의 인코딩
13777정성태10/20/20246611Windows: 265. Win32 API의 W(유니코드) 버전은 UCS-2일까요? UTF-16 인코딩일까요?
13776정성태10/19/20247837C/C++: 180. C++ - 고수준 FILE I/O 함수에서의 Unicode stream 모드(_O_WTEXT, _O_U16TEXT, _O_U8TEXT)파일 다운로드1
13775정성태10/19/20247989개발 환경 구성: 728. 윈도우 환경의 개발자를 위한 UTF-8 환경 설정
13774정성태10/18/20247369Linux: 91. Container 환경에서 출력하는 eBPF bpf_get_current_pid_tgid의 pid가 존재하지 않는 이유
13773정성태10/18/20247012Linux: 90. pid 네임스페이스 구성으로 본 WSL 2 + docker-desktop
13772정성태10/17/20247350Linux: 89. pid 네임스페이스 구성으로 본 WSL 2 배포본의 계층 관계
13771정성태10/17/20247193Linux: 88. WSL 2 리눅스 배포본 내에서의 pid 네임스페이스 구성
13770정성태10/17/20247731Linux: 87. ps + grep 조합에서 grep 명령어를 사용한 프로세스를 출력에서 제거하는 방법
13769정성태10/15/20249163Linux: 86. Golang + bpf2go를 사용한 eBPF 기본 예제파일 다운로드1
13768정성태10/15/20248126C/C++: 179. C++ - _O_WTEXT, _O_U16TEXT, _O_U8TEXT의 Unicode stream 모드파일 다운로드2
13767정성태10/14/20246632오류 유형: 929. bpftrace 수행 시 "ERROR: Could not resolve symbol: /proc/self/exe:BEGIN_trigger"
13766정성태10/14/20245848C/C++: 178. C++ - 파일에 대한 Text 모드의 "translated" 동작파일 다운로드1
13765정성태10/12/20247802오류 유형: 928. go build 시 "package maps is not in GOROOT" 오류
13764정성태10/11/20248788Linux: 85. Ubuntu - 원하는 golang 버전 설치
13763정성태10/11/20246987Linux: 84. WSL / Ubuntu 20.04 - bpftool 설치
13762정성태10/11/20247169Linux: 83. WSL / Ubuntu 22.04 - bpftool 설치
13761정성태10/11/20246704오류 유형: 927. WSL / Ubuntu - /usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found
13760정성태10/11/20248155Linux: 82. Ubuntu - clang 최신(stable) 버전 설치
13759정성태10/10/20249226C/C++: 177. C++ - 자유 함수(free function) 및 주소 지정 가능한 함수(addressable function) [6]
13758정성태10/8/20247582오류 유형: 926. dotnet tools를 sudo로 실행하는 경우 command not found
13757정성태10/8/20248124닷넷: 2306. Linux - dotnet tool의 설치 디렉터리가 PATH 환경변수에 자동 등록이 되는 이유
1  2  3  4  5  6  7  8  [9]  10  11  12  13  14  15  ...