Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




1  2  3  4  5  6  7  8  9  10  11  [12]  13  14  15  ...
NoWriterDateCnt.TitleFile(s)
13330정성태4/26/20233526Windows: 247. Win32 C/C++ - CS_GLOBALCLASS 설명
13329정성태4/24/20233720Windows: 246. Win32 C/C++ - 직접 띄운 대화창 템플릿을 위한 Modal 메시지 루프 생성파일 다운로드1
13328정성태4/19/20233395VS.NET IDE: 184. Visual Studio - Fine Code Coverage에서 동작하지 않는 Fake/Shim 테스트
13327정성태4/19/20233806VS.NET IDE: 183. C# - .NET Core/5+ 환경에서 Fakes를 이용한 단위 테스트 방법
13326정성태4/18/20235229.NET Framework: 2109. C# - 닷넷 응용 프로그램에서 SQLite 사용 (System.Data.SQLite) [1]파일 다운로드1
13325정성태4/18/20234522스크립트: 48. 파이썬 - PostgreSQL의 with 문을 사용한 경우 연결 개체 누수
13324정성태4/17/20234354.NET Framework: 2108. C# - Octave의 "save -binary ..."로 생성한 바이너리 파일 분석파일 다운로드1
13323정성태4/16/20234282개발 환경 구성: 677. Octave에서 Excel read/write를 위한 io 패키지 설치
13322정성태4/15/20235060VS.NET IDE: 182. Visual Studio - 32비트로만 빌드된 ActiveX와 작업해야 한다면?
13321정성태4/14/20233888개발 환경 구성: 676. WSL/Linux Octave - Python 스크립트 연동
13320정성태4/13/20233864개발 환경 구성: 675. Windows Octave 8.1.0 - Python 스크립트 연동
13319정성태4/12/20234304개발 환경 구성: 674. WSL 2 환경에서 GNU Octave 설치
13318정성태4/11/20234140개발 환경 구성: 673. JetBrains IDE에서 "Squash Commits..." 메뉴가 비활성화된 경우
13317정성태4/11/20234232오류 유형: 855. WSL 2 Ubuntu 20.04 - error: cannot communicate with server: Post http://localhost/v2/snaps/...
13316정성태4/10/20233560오류 유형: 854. docker-compose 시 "json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)" 오류 발생
13315정성태4/10/20233757Windows: 245. Win32 - 시간 만료를 갖는 컨텍스트 메뉴와 윈도우 메시지의 영역별 정의파일 다운로드1
13314정성태4/9/20233846개발 환경 구성: 672. DosBox를 이용한 Turbo C, Windows 3.1 설치
13313정성태4/9/20233932개발 환경 구성: 671. Hyper-V VM에 Turbo C 2.0 설치 [2]
13312정성태4/8/20233944Windows: 244. Win32 - 시간 만료를 갖는 MessageBox 대화창 구현 (개선된 버전)파일 다운로드1
13311정성태4/7/20234457C/C++: 163. Visual Studio 2022 - DirectShow 예제 컴파일(WAV Dest)
13310정성태4/6/20234043C/C++: 162. Visual Studio - /NODEFAULTLIB 옵션 설정 후 수동으로 추가해야 할 library
13309정성태4/5/20234216.NET Framework: 2107. .NET 6+ FileStream의 구조 변화
13308정성태4/4/20234112스크립트: 47. 파이썬의 time.time() 실숫값을 GoLang / C#에서 사용하는 방법
13307정성태4/4/20233879.NET Framework: 2106. C# - .NET Core/5+ 환경의 Windows Forms 응용 프로그램에서 HINSTANCE 구하는 방법
13306정성태4/3/20233674Windows: 243. Win32 - 윈도우(cbWndExtra) 및 윈도우 클래스(cbClsExtra) 저장소 사용 방법
13305정성태4/1/20234042Windows: 242. Win32 - 시간 만료를 갖는 MessageBox 대화창 구현 (쉬운 버전)파일 다운로드1
1  2  3  4  5  6  7  8  9  10  11  [12]  13  14  15  ...