Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 91  92  93  94  95  96  97  98  99  100  [101]  102  103  104  105  ...
NoWriterDateCnt.TitleFile(s)
11407정성태12/18/201724176.NET Framework: 712. C# - SharpDX + DXGI를 이용한 윈도우 화면 캡처 소스 코드 + Direct2D 출력 + OpenCV [1]파일 다운로드1
11406정성태12/17/201746558.NET Framework: 711. C# - OpenCvSharp의 Mat 데이터 조작 방법 [5]파일 다운로드1
11405정성태12/17/201742524.NET Framework: 710. C# - OpenCvSharp을 이용한 Webcam 영상 처리 + Direct2D [1]파일 다운로드1
11404정성태12/16/201729855.NET Framework: 709. C# - OpenCvSharp을 이용한 동영상(avi, mp4, ...) 처리 + Direct2D [7]파일 다운로드1
11403정성태12/16/201732485.NET Framework: 708. C# - OpenCvSharp을 이용한 동영상(avi, mp4, ...) 처리 [3]파일 다운로드1
11402정성태12/15/201737159.NET Framework: 707. OpenCV 응용 프로그램을 C#으로 구현 - OpenCvSharp [2]파일 다운로드1
11401정성태12/15/201726104.NET Framework: 706. C# - SharpDX + DXGI를 이용한 윈도우 화면 캡처 소스 코드 + Direct2D 출력 [2]파일 다운로드1
11400정성태12/14/201728968.NET Framework: 705. C# - SharpDX + DXGI를 이용한 윈도우 화면 캡처 소스 코드 [9]파일 다운로드1
11399정성태12/13/201717546.NET Framework: 704. Win32 API의 UnionRect를 닷넷 BCL의 Rectangle.Union으로 바꿀 때 주의 사항
11398정성태12/13/201717750오류 유형: 442. ASP.NET Core Web Application (on .NET Framework) 프로젝트에서 외부 라이브러리 동적 로드 시 런타임 버전 문제파일 다운로드1
11397정성태12/12/201720327.NET Framework: 703. 양자 컴퓨팅을 위한 마이크로소프트의 Q# 언어
11396정성태12/8/201742687개발 환경 구성: 343. Visual Studio - 리눅스 용 프로젝트의 인텔리센스를 위한 헤더 파일 처리 방법 [3]
11395정성태12/8/201718577오류 유형: 441. 이벤트 로그 - Time Provider NtpClient: No valid response has been received from domain controller
11394정성태12/8/201718202개발 환경 구성: 342. 비주얼 스튜디오에서 실행하던 ASP.NET Core (.NET Framework) 응용 프로그램을 명령행에서 실행하는 방법
11393정성태12/7/201722742Windows: 145. 윈도우 10 빌드 17046부터 WSL에서 백그라운드 작업 지원 [5]
11392정성태12/7/201718020개발 환경 구성: 341. openSUSE에 닷넷 코어 설치
11391정성태12/7/201720869개발 환경 구성: 340. WSL을 이용해 윈도우 PC 1대에서 openSUSE 응용 프로그램을 Visual Studio로 개발하는 방법 [1]
11390정성태12/7/201729519개발 환경 구성: 339. WSL을 이용해 윈도우 PC 1대에서 Linux 응용 프로그램을 Visual Studio로 개발하는 방법 [6]
11389정성태12/7/201718183오류 유형: 440. .NET Core 오류 - 0x80131620 Unable to load DLL 'libuv'
11388정성태12/6/201721831개발 환경 구성: 338. WSL 또는 Ubuntu에 닷넷 코어 설치 [3]
11387정성태12/6/201722158오류 유형: 439. 이벤트 로그 - Data Sharing Service 서비스의 %%3239247874 오류 메시지
11386정성태12/5/201717715오류 유형: 438. Hyper-V - '...' failed to add device 'Virtual CD/DVD Disk'
11385정성태12/5/201730831VC++: 121. DXGI를 이용한 윈도우 화면 캡처 소스 코드(Visual C++) [16]파일 다운로드1
11384정성태12/5/201720132오류 유형: 437. Visual C++ - Cannot open include file: 'SDKDDKVer.h'
11383정성태12/4/201723246디버깅 기술: 110. 비동기 코드 실행 중 예외로 인한 ASP.NET 프로세스 비정상 종료 현상 [1]
11382정성태12/4/201721838오류 유형: 436. System.Data.SqlClient.SqlException (0x80131904): Connection Timeout Expired 예외 발생 시 "[Pre-Login] initialization=48; handshake=1944;" 값의 의미
... 91  92  93  94  95  96  97  98  99  100  [101]  102  103  104  105  ...