Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 91  92  93  94  95  [96]  97  98  99  100  101  102  103  104  105  ...
NoWriterDateCnt.TitleFile(s)
11565정성태6/28/201823548.NET Framework: 779. C# 7.3에서 enum을 boxing 없이 int로 변환하기 - 세 번째 이야기파일 다운로드1
11564정성태6/27/201821980.NET Framework: 778. (Unity가 사용하는) 모노 런타임의 __makeref 오류
11563정성태6/27/201820039개발 환경 구성: 386. .NET Framework Native compiler 프리뷰 버전 사용법 [2]
11562정성태6/26/201819452개발 환경 구성: 385. 레지스트리에 등록된 원격지 스크립트 COM 객체 실행 방법
11561정성태6/26/201831557.NET Framework: 777. UI 요소의 접근은 반드시 그 UI를 만든 스레드에서! [8]파일 다운로드1
11560정성태6/25/201822831.NET Framework: 776. C# 7.3 - 초기화 식에서 변수 사용 가능(expression variables in initializers)파일 다운로드1
11559정성태6/25/201830117개발 환경 구성: 384. 영문 설정의 Windows 10 명령행 창(cmd.exe)의 한글 지원 [6]
11558정성태6/24/201823628.NET Framework: 775. C# 7.3 - unmanaged(blittable) 제네릭 제약파일 다운로드1
11557정성태6/22/201822675.NET Framework: 774. C# - blittable 타입이란?파일 다운로드1
11556정성태6/19/201829927.NET Framework: 773. C# 7.3 - 구조체의 고정 크기를 갖는 fixed 배열 필드에 대한 직접 접근 가능 [1]파일 다운로드1
11555정성태6/18/201821537.NET Framework: 772. C# 7.3 - 사용자 정의 타입에 fixed 적용 가능(Custom fixed)파일 다운로드1
11554정성태6/17/201823609.NET Framework: 771. C# 7.3 - 자동 구현 속성에 특성 적용 가능(Attribute on backing field)
11553정성태6/15/201822849.NET Framework: 770. C# 7.3 - 개선된 메서드 선택 규칙 3가지(Improved overload candidates)파일 다운로드1
11552정성태6/15/201825232.NET Framework: 769. C# 7.3에서 개선된 문법 4개(Support == and != for tuples, Ref Reassignment, Constraints, Stackalloc initializers)파일 다운로드1
11551정성태6/14/201821662개발 환경 구성: 383. BenchmarkDotNet 사용 시 주의 사항
11550정성태6/13/201821238.NET Framework: 768. BenchmarkDotNet으로 Span<T> 성능 측정 [2]
11549정성태6/13/201823607개발 환경 구성: 382. BenchmarkDotNet에서 생성한 BuildPlots.R 파일을 실행하는 방법
11548정성태6/13/201820250오류 유형: 470. .NET Core + BenchmarkDotNet 실행 시 프레임워크를 찾지 못하는 문제
11547정성태6/13/201826058.NET Framework: 767. BenchmarkDotNet 라이브러리 소개파일 다운로드1
11546정성태6/12/201825645.NET Framework: 766. C# 7.2의 특징 - GC 및 메모리 복사 방지를 위한 struct 타입 개선 [9]파일 다운로드1
11545정성태6/11/201824371오류 유형: 469. .NET Core 프로젝트를 Visual Studio에서 실행 시 System.BadImageFormatException 발생하는 경우 [1]
11544정성태6/10/201823802.NET Framework: 765. C# 7.2 - 숫자 리터럴의 선행 밑줄과 뒤에 오지 않는 명명된 인수
11543정성태6/9/201823240.NET Framework: 764. C# 7.2 - private protected 접근자 추가파일 다운로드1
11542정성태6/9/201861701개발 환경 구성: 381. Azure Web App 확장 예제 - Remove Custom Headers
11541정성태6/9/201820852개발 환경 구성: 380. Azure Web App 확장 배포 방법 [1]
11540정성태6/9/201821130개발 환경 구성: 379. Azure Web App 확장 예제 제작 [2]
... 91  92  93  94  95  [96]  97  98  99  100  101  102  103  104  105  ...