Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 91  92  93  94  95  96  97  98  99  100  101  102  103  [104]  105  ...
NoWriterDateCnt.TitleFile(s)
11376정성태11/28/201726560VS.NET IDE: 123. Visual Studio 편집기의 \r\n (crlf) 개행을 \n으로 폴더 단위로 설정하는 방법
11375정성태11/28/201720032오류 유형: 434. Visual Studio로 ASP.NET 디버깅 중 System.Web.HttpException - Could not load type 오류
11374정성태11/27/201726232사물인터넷: 14. 라즈베리 파이 - (윈도우의 NT 서비스처럼) 부팅 시 시작하는 프로그램 설정 [1]
11373정성태11/27/201725212오류 유형: 433. Raspberry Pi/Windows 다중 플랫폼 지원 컴파일 관련 오류 기록
11372정성태11/25/201727593사물인터넷: 13. 윈도우즈 사용자를 위한 라즈베리 파이 제로 W 모델을 설정하는 방법 [4]
11371정성태11/25/201721529오류 유형: 432. Hyper-V 가상 스위치 생성 시 Failed to connect Ethernet switch port 0x80070002 오류 발생
11370정성태11/25/201721858오류 유형: 431. Hyper-V의 Virtual Switch 생성 시 "External network" 목록에 특정 네트워크 어댑터 항목이 없는 경우
11369정성태11/25/201723446사물인터넷: 12. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 키보드 및 마우스로 쓰는 방법 (절대 좌표, 상대 좌표, 휠) [1]
11368정성태11/25/201728807.NET Framework: 699. UDP 브로드캐스트 주소 255.255.255.255와 192.168.0.255의 차이점과 이를 고려한 C# UDP 서버/클라이언트 예제 [2]파일 다운로드1
11367정성태11/25/201729348개발 환경 구성: 337. 윈도우 운영체제의 route 명령어 사용법
11366정성태11/25/201721317오류 유형: 430. 이벤트 로그 - Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object.
11365정성태11/25/201722534오류 유형: 429. 이벤트 로그 - User Policy could not be updated successfully
11364정성태11/24/201725584사물인터넷: 11. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 마우스로 쓰는 방법 (절대 좌표) [2]
11363정성태11/23/201725728사물인터넷: 10. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 마우스 + 키보드로 쓰는 방법 (두 번째 이야기)
11362정성태11/22/201720662오류 유형: 428. 윈도우 업데이트 KB4048953 - 0x800705b4 [2]
11361정성태11/22/201723901오류 유형: 427. 이벤트 로그 - Filter Manager failed to attach to volume '\Device\HarddiskVolume??' 0xC03A001C
11360정성태11/22/201724648오류 유형: 426. 이벤트 로그 - The kernel power manager has initiated a shutdown transition.
11359정성태11/16/201723751오류 유형: 425. 윈도우 10 Version 1709 (OS Build 16299.64) 업그레이드 시 발생한 문제 2가지
11358정성태11/15/201728926사물인터넷: 9. Visual Studio 2017에서 Raspberry Pi C++ 응용 프로그램 제작 [1]
11357정성태11/15/201729394개발 환경 구성: 336. 윈도우 10 Bash 쉘에서 C++ 컴파일하는 방법
11356정성태11/15/201730974사물인터넷: 8. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 마우스 + 키보드로 쓰는 방법 [4]
11355정성태11/15/201725657사물인터넷: 7. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 마우스로 쓰는 방법 [2]파일 다운로드2
11354정성태11/14/201730894사물인터넷: 6. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 키보드로 쓰는 방법 [8]
11353정성태11/14/201727680사물인터넷: 5. Raspberry Pi Zero(OTG)를 다른 컴퓨터에 연결해 가상 이더넷 카드로 쓰는 방법 [1]
11352정성태11/14/201724358사물인터넷: 4. Samba를 이용해 윈도우와 Raspberry Pi간의 파일 교환 [1]
11351정성태11/7/201726892.NET Framework: 698. C# 컴파일러 대신 직접 구현하는 비동기(async/await) 코드 [6]파일 다운로드1
... 91  92  93  94  95  96  97  98  99  100  101  102  103  [104]  105  ...