Microsoft MVP성태의 닷넷 이야기
글쓴 사람
정성태 (techsharer at outlook.com)
홈페이지
첨부 파일
 
(연관된 글이 1개 있습니다.)

Linux - 외부에서의 접속을 허용하기 위한 TCP 포트 여는 방법

예전에 Centos 7 환경에서 firewall-cmd 명령어를 이용해 방화벽 제어를 했었는데요, 그런데 방화벽 설정이 없는데도,

$ sudo firewall-cmd --permanent --zone=public --add-port=10240/tcp
FirewallD is not running

외부에서 "telnet ...ip... 10240"으로 접속 테스트가 안 됩니다. 음... 뭔가 또 다른 방화벽 시스템이 있는 듯한데요, 한참을 헤맨 끝에 iptables라는 것이 그 역할을 한다는 것을 알게 되었습니다. ^^;

How To List and Delete Iptables Firewall Rules
; https://www.digitalocean.com/community/tutorials/how-to-list-and-delete-iptables-firewall-rules

예를 들어, 아래와 같이 명령을 수행해 얻은 출력을 보면,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

"multiport dports 8777"라는 것에서 8777 포트에 대해 "telnet ...[ip]... 8777"로 연결하면 외부에서 접속이 됩니다. 그러니까, 위의 테이블에 포트를 등록하면 되는 것 같습니다. 이를 위해,

How to Open Ports in iptables
; https://www.ipserverone.info/knowledge-base/how-to-open-ports-in-iptables/

예를 들어 10240번 포트를 허용하고 싶다면 이렇게 명령어를 내릴 수 있습니다.

// 10240 포트로 들어오는 접속 허용
$ iptables -I INPUT -p tcp --dport 10240 -j ACCEPT

다시 iptables를 확인하면 해당 포트가 추가돼 있고,

$ sudo iptables -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:10240
           tcp  --  anywhere             anywhere            
neutron-openvswi-INPUT  all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             multiport dports fs-agent /* 001 aodh-api incoming aodh_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8777 /* 001 ceilometer-api incoming ceilometer_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8776 /* 001 cinder-api incoming cinder_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports armtechdaemon /* 001 glance incoming glance_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8041 /* 001 gnocchi-api incoming gnocchi_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports http /* 001 horizon 80 incoming */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports commplex-main /* 001 keystone incoming keystone */
ACCEPT     udp  --  anywhere             anywhere             multiport dports bootps /* 001 neutron dhcp in incoming neutron_dhcp_in_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 9696 /* 001 neutron server incoming neutron_server_192.168.0.9 */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 8773,8774,8775,8778 /* 001 nova api incoming nova_api */
ACCEPT     tcp  --  anywhere             anywhere             multiport dports 6080 /* 001 novncproxy incoming */
ACCEPT     all  --  anywhere             anywhere             state RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere             state NEW tcp dpt:ssh
REJECT     all  --  anywhere             anywhere             reject-with icmp-host-prohibited

실제로 외부에서 10240 포트로의 접속이 가능해집니다.




참고로, 삭제는 위의 추가 명령어에서 옵션만 "I"가 아닌 "D"로 바꾸면 됩니다.

$ sudo iptables -D INPUT -p tcp --dport 10240 -j ACCEPT




[이 글에 대해서 여러분들과 의견을 공유하고 싶습니다. 틀리거나 미흡한 부분 또는 의문 사항이 있으시면 언제든 댓글 남겨주십시오.]

[연관 글]






[최초 등록일: ]
[최종 수정일: 6/27/2023]

Creative Commons License
이 저작물은 크리에이티브 커먼즈 코리아 저작자표시-비영리-변경금지 2.0 대한민국 라이센스에 따라 이용하실 수 있습니다.
by SeongTae Jeong, mailto:techsharer at outlook.com

비밀번호

댓글 작성자
 




... 91  92  93  94  95  96  97  98  [99]  100  101  102  103  104  105  ...
NoWriterDateCnt.TitleFile(s)
11457정성태2/17/201823962.NET Framework: 732. C# - Task.ContinueWith 설명 [1]파일 다운로드1
11456정성태2/17/201829696.NET Framework: 731. C# - await을 Task 타입이 아닌 사용자 정의 타입에 적용하는 방법 [7]파일 다운로드1
11455정성태2/17/201818607오류 유형: 451. ASP.NET Core - An error occurred during the compilation of a resource required to process this request.
11454정성태2/12/201827489기타: 71. 만료된 Office 제품 키를 변경하는 방법
11453정성태1/31/201819444오류 유형: 450. Azure Cloud Services(classic) 배포 시 "Certificate with thumbprint ... doesn't exist." 오류 발생
11452정성태1/31/201824980기타: 70. 재현 가능한 최소한의 예제 프로젝트란? [3]파일 다운로드1
11451정성태1/24/201819218디버깅 기술: 111. windbg - x86 메모리 덤프 분석 시 닷넷 메서드의 호출 인자 값 확인
11450정성태1/24/201834480Windows: 146. PowerShell로 원격 프로세스(EXE, BAT) 실행하는 방법 [1]
11449정성태1/23/201821843오류 유형: 449. 단위 테스트 - Could not load file or assembly 'Microsoft.VisualStudio.QualityTools.VideoRecorderEngine' or one of its dependencies. [1]
11448정성태1/20/201819301오류 유형: 448. Fakes를 포함한 단위 테스트 프로젝트를 빌드 시 CS0619 관련 오류 발생
11447정성태1/20/201820659.NET Framework: 730. dotnet user-secrets 명령어 [2]파일 다운로드1
11446정성태1/20/201821709.NET Framework: 729. windbg로 살펴보는 GC heap의 Segment 구조 [2]파일 다운로드1
11445정성태1/20/201819589.NET Framework: 728. windbg - 눈으로 확인하는 Workstation GC / Server GC
11444정성태1/19/201819685VS.NET IDE: 125. Visual Studio에서 Selenium WebDriver를 이용한 웹 브라우저 단위 테스트 구성파일 다운로드1
11443정성태1/18/201820209VC++: 124. libuv 모듈 살펴 보기
11442정성태1/18/201818073개발 환경 구성: 353. ASP.NET Core 프로젝트의 "Enable unmanaged code debugging" 옵션 켜는 방법
11441정성태1/18/201816620오류 유형: 447. ASP.NET Core 배포 오류 - Ensure that restore has run and that you have included '...' in the TargetFrameworks for your project.
11440정성태1/17/201819897.NET Framework: 727. ASP.NET의 HttpContext.Current 구현에 대응하는 ASP.NET Core의 IHttpContextAccessor/HttpContextAccessor 사용법파일 다운로드1
11439정성태1/17/201824683기타: 69. C# - CPU 100% 부하 주는 프로그램파일 다운로드1
11438정성태1/17/201819459오류 유형: 446. Error CS0234 The type or namespace name 'ITuple' does not exist in the namespace
11437정성태1/17/201818741VS.NET IDE: 124. Platform Toolset 설정에 따른 Visual C++의 헤더 파일 기본 디렉터리
11436정성태1/16/201821006개발 환경 구성: 352. ASP.NET Core (EXE) 프로세스가 IIS에서 호스팅되는 방법 - ASP.NET Core Module(AspNetCoreModule) [4]
11435정성태1/16/201822132개발 환경 구성: 351. OWIN 웹 서버(EXE)를 IIS에서 호스팅하는 방법 - HttpPlatformHandler (Reverse Proxy)파일 다운로드2
11434정성태1/15/201822466개발 환경 구성: 350. 사용자 정의 웹 서버(EXE)를 IIS에서 호스팅하는 방법 - HttpPlatformHandler (Reverse Proxy)파일 다운로드2
11433정성태1/15/201820536개발 환경 구성: 349. dotnet ef 명령어 사용을 위한 준비
11432정성태1/11/201826300.NET Framework: 726. WPF + Direct2D + SharpDX 출력 C# 예제파일 다운로드2
... 91  92  93  94  95  96  97  98  [99]  100  101  102  103  104  105  ...